[email protected]:~# mdadm --manage /dev/md126 --remove faulty
mdadm: hot removed 8:1 from /dev/md126
[email protected]:~# mdadm --manage /dev/md127 --remove faulty
mdadm: hot removed 8:2 from /dev/md127

[email protected]:~# mdadm --grow /dev/md127 --size=max
mdadm: component size of /dev/md127 has been set to 488122392K

[email protected]:~# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md126 : active raid1 sdc1[3] sdb1[2]
      261952 blocks super 1.2 [2/2] [UU]
md127 : active raid1 sdc2[3] sdb2[2]
      488122392 blocks super 1.2 [2/2] [UU]
      [=>...................]  resync =  7.0% (34210240/488122392) finish=88.9min speed=85032K/sec
unused devices: <none>

cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md126 : active raid1 sdc1[3] sdb1[2] sda1[0](F)
      261952 blocks super 1.2 [2/2] [UU]
md127 : active raid1 sdc2[3] sdb2[2] sda2[0](F)
      33274880 blocks super 1.2 [2/2] [UU]
unused devices: <none>

fdisk -lu /dev/sdb
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0xf5d9e70f
   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *        2048      526335      262144   fd  Linux raid autodetect
Partition 1 does not end on cylinder boundary.
/dev/sdb2          526336   976773167   488123416   fd  Linux raid autodetect
Partition 2 does not end on cylinder boundary.

Now when a request arrives, the server will first check if it is using an IP address that matches the NameVirtualHost. If it is, then it will look at each <VirtualHost> section with a matching IP address and try to find one where the ServerName or ServerAlias matches the requested hostname. If it finds one, then it uses the configuration for that server. If no matching virtual host is found, then the first listed virtual host that matches the IP address will be used.

<VirtualHost 127.0.0.1:81>
        ServerAdmin [email protected]
        ServerName aaaa.ru
        DocumentRoot /home/virtwww/aaaa/http/
        <Directory />
                Options FollowSymLinks
                AllowOverride All
        </Directory>
        <Directory /home/virtwww/aaaa/http/>
                Options Indexes FollowSymLinks MultiViews
                AllowOverride All
                Order allow,deny
                allow from all
        </Directory>
        ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
        <Directory "/usr/lib/cgi-bin">
                AllowOverride All
                Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
                Order allow,deny
                Allow from all
        </Directory>
        ErrorLog /home/virtwww/aaaa/logs/sam.error.log
        # Possible values include: debug, info, notice, warn, error, crit,
        # alert, emerg.
        LogLevel info
        CustomLog /home/virtwww/aaaa/logs/sam.access.log combined
    Alias /doc/ "/usr/share/doc/"
    <Directory "/usr/share/doc/">
        Options Indexes MultiViews FollowSymLinks
        AllowOverride All
        Order deny,allow
        Deny from all
        Allow from 127.0.0.0/255.0.0.0 ::1/128
    </Directory>
</VirtualHost>