tekma
6 лет, 4 месяца назад
Темы: 10
Сообщения: 36
Участник с: 03 мая 2016
Обновил catalyst до 15.12, ошибки в Xorg.0.log пропали, гном начал выдавать следующее:
Error of failed request: BadValue(integer parameter out of range for operation)
Major opcode of failed request: 141(RANDR)
Minor opcode of failed request: 13 (RRChangeOutputProperty)
Value in failed request: 0x77
Serial number of failed request: 330
Current serial number in output stream: 331
tekma
6 лет, 4 месяца назад (отредактировано 6 лет, 4 месяца назад)
Темы: 10
Сообщения: 36
Участник с: 03 мая 2016
Забыл добавить что SLiM стартует нормально и

echo "export COGL_DRIVER=gl" >> /etc/environment
echo "export COGL_OVERRIDE_GL_VERSION=1.4" >> /etc/environment
echo "export COGL_RENDERER=GLX" >> /etc/environment
echo "export LD_PRELOAD=/usr/lib/fglrx/fglrx-libGL.so.1.2" >> /etc/environment
не помогло.
tekma
6 лет, 4 месяца назад (отредактировано 6 лет, 4 месяца назад)
Темы: 10
Сообщения: 36
Участник с: 03 мая 2016
Здравствуйте!
Вот такая вот проблема:
поставил catalyst, gnome, gnome-shell, gnome-initial-setup(или как его), прописал его старт в xinitrc, и при startx вижу лишь край(только кнопка далее) приветственного сообщения в левом верхнем углу, после нажатия на неё, окно приветствия закрылось и остался лишь серый фон.
В логе иксов настораживает:
fglrx(0): Cannot read int vect
Следуя этому совету все локали не utf-8 убрал
Прошу помощи в решении данной проблемы. Заранее спасибо!
Kernel: 4.5.1-1-ARCH
Параметры ядра: nomodeset b43.allhwsupport=1 modprobe.blacklist=sp5100_tco
Видеокарта: AMD Radeon HD 7520G
Catalys(поставлен из репа catalyst-stable): 15.9
Xorg: 1.17.4
Xorg.0.log:

[   519.070]
X.Org X Server 1.17.4
Release Date: 2015-10-28
[   519.073] X Protocol Version 11, Revision 0
[   519.074] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[   519.075] Current Operating System: Linux * 4.5.1-1-ARCH #1 SMP PREEMPT Thu Apr 14 19:19:32 CEST 2016 x86_64
[   519.075] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=*** rw nomodeset modprobe.blacklist=sp5100_tco quiet
[   519.078] Build Date: 01 November 2015  10:36:50AM
[   519.078]
[   519.079] Current version of pixman: 0.34.0
[   519.080] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   519.081] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   519.083] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May  4 08:26:23 2016
[   519.154] (==) Using config file: "/etc/X11/xorg.conf"
[   519.156] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   519.186] (==) ServerLayout "aticonfig Layout"
[   519.186] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[   519.186] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[   519.187] (**) |   |-->Device "aticonfig-Device[0]-0"
[   519.187] (==) Automatically adding devices
[   519.188] (==) Automatically enabling devices
[   519.188] (==) Automatically adding GPU devices
[   519.238] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[   519.238] 	Entry deleted from font path.
[   519.238] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[   519.238] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[   519.238] 	Entry deleted from font path.
[   519.238] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[   519.238] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[   519.238] (==) ModulePath set to "/usr/lib/xorg/modules"
[   519.238] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   519.252] (II) Loader magic: 0x817d60
[   519.252] (II) Module ABI versions:
[   519.252] 	X.Org ANSI C Emulation: 0.4
[   519.252] 	X.Org Video Driver: 19.0
[   519.252] 	X.Org XInput driver : 21.1
[   519.252] 	X.Org Server Extension : 9.0
[   519.257] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[   519.259] (--) PCI:*(0:0:1:0) 1002:9990:17aa:397c rev 0, Mem @ 0xe0000000/268435456, 0xf0200000/262144, I/O @ 0x00003000/256
[   519.259] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   519.260] (II) "glx" will be loaded by default.
[   519.260] (II) LoadModule: "glx"
[   519.337] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   519.366] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[   519.366] 	compiled for 6.9.0, module version = 1.0.0
[   519.366] (II) LoadModule: "fglrx"
[   519.366] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[   519.738] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[   519.738] 	compiled for 1.4.99.906, module version = 15.20.3
[   519.738] 	Module class: X.Org Video Driver
[   519.740] (II) Loading sub module "fglrxdrm"
[   519.740] (II) LoadModule: "fglrxdrm"
[   519.741] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   519.768] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   519.768] 	compiled for 1.4.99.906, module version = 15.20.3
[   519.768] (II) AMD Proprietary Linux Driver Version Identifier:15.20.3
[   519.768] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.201.1151
[   519.768] (II) AMD Proprietary Linux Driver Build Date: Sep  8 2015 15:06:35
[   519.768] (++) using VT number 1

[   519.768] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   519.768] (WW) Falling back to old probe method for fglrx
[   519.895] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[   519.913] ukiDynamicMajor: found major device number 248
[   519.913] ukiDynamicMajor: found major device number 248
[   519.913] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   519.914] ukiOpenDevice: node name is /dev/ati/card0
[   519.914] ukiOpenDevice: open result is 10, (OK)
[   520.707] ukiOpenByBusid: ukiOpenMinor returns 10
[   520.707] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   520.750] (--) Chipset Supported AMD Graphics Processor (0x9990) found
[   520.752] (WW) fglrx: No matching Device section for instance (BusID PCI:[email protected]:1:1) found
[   520.753] (II) fglrx(0): pEnt->device->identifier=0x10e0840
[   520.753] (II) fglrx(0): === [xdl_xs117_atiddxPreInit] === begin
[   520.753] (II) fglrx(0): FB driver is enabled
[   520.754] (II) Loading sub module "vgahw"
[   520.754] (II) LoadModule: "vgahw"
[   520.768] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   520.782] (II) Module vgahw: vendor="X.Org Foundation"
[   520.782] 	compiled for 1.17.4, module version = 0.1.0
[   520.782] 	ABI class: X.Org Video Driver, version 19.0
[   520.783] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[   520.783] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[   520.783] (==) fglrx(0): Default visual is TrueColor
[   520.783] (**) fglrx(0): Option "DPMS" "true"
[   520.783] (==) fglrx(0): RGB weight 888
[   520.783] (II) fglrx(0): Using 8 bits per RGB
[   520.783] (==) fglrx(0): Buffer Tiling is ON
[   520.783] (II) Loading sub module "fglrxdrm"
[   520.783] (II) LoadModule: "fglrxdrm"
[   520.783] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[   520.783] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[   520.783] 	compiled for 1.4.99.906, module version = 15.20.3
[   520.787] ukiDynamicMajor: found major device number 248
[   520.787] ukiDynamicMajor: found major device number 248
[   520.787] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   520.787] ukiOpenDevice: node name is /dev/ati/card0
[   520.787] ukiOpenDevice: open result is 12, (OK)
[   520.787] ukiOpenByBusid: ukiOpenMinor returns 12
[   520.787] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   520.787] (**) fglrx(0): NoAccel = NO
[   520.787] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[   520.787] (--) fglrx(0): Chipset: "AMD Radeon HD 7520G" (Chipset = 0x9990)
[   520.787] (--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x397c)
[   520.787] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[   520.787] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[   520.787] (--) fglrx(0): MMIO registers at 0xf0200000
[   520.787] (--) fglrx(0): I/O port at 0x00003000
[   520.787] (==) fglrx(0): ROM-BIOS at 0x000c0000
[   520.802] (II) fglrx(0): ATIF platform detected
[   520.803] (II) fglrx(0): AC Adapter is used
[   520.819] (EE) fglrx(0): Cannot read int vect
[   520.831] (II) Loading sub module "vbe"
[   520.831] (II) LoadModule: "vbe"
[   520.831] (II) Loading /usr/lib/xorg/modules/libvbe.so
[   520.842] (II) Module vbe: vendor="X.Org Foundation"
[   520.842] 	compiled for 1.17.4, module version = 1.1.0
[   520.842] 	ABI class: X.Org Video Driver, version 19.0
[   520.842] (II) Loading sub module "int10"
[   520.842] (II) LoadModule: "int10"
[   520.842] (II) Loading /usr/lib/xorg/modules/libint10.so
[   520.848] (II) Module int10: vendor="X.Org Foundation"
[   520.848] 	compiled for 1.17.4, module version = 1.0.0
[   520.848] 	ABI class: X.Org Video Driver, version 19.0
[   520.848] (II) fglrx(0): initializing int10
[   520.848] (EE) fglrx(0): Cannot read int vect
[   520.848] (WW) fglrx(0): GetVBEMode failed
[   520.848] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[   520.849] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[   520.849] (II) fglrx(0): PCIE card detected
[   520.849] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[   520.849] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[   520.849] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[   520.849] (II) fglrx(0): RandR 1.2 support is enabled!
[   520.849] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[   520.849] (II) Loading sub module "fb"
[   520.849] (II) LoadModule: "fb"
[   520.850] (II) Loading /usr/lib/xorg/modules/libfb.so
[   520.854] (II) Module fb: vendor="X.Org Foundation"
[   520.854] 	compiled for 1.17.4, module version = 1.0.0
[   520.854] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   520.854] (II) fglrx(0): EDID Management option: EDID Management is enabled
[   520.854] (II) Loading sub module "ddc"
[   520.854] (II) LoadModule: "ddc"
[   520.854] (II) Module "ddc" already built-in
[   521.131] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[   521.131] (II) fglrx(0): Output DFP1 has no monitor section
[   521.131] (II) fglrx(0): Output CRT1 has no monitor section
[   521.131] (II) Loading sub module "ddc"
[   521.131] (II) LoadModule: "ddc"
[   521.131] (II) Module "ddc" already built-in
[   521.131] (WW) fglrx(0): Failed to get EDID by ACPI
[   521.131] (II) fglrx(0): Connected Display0: LVDS
[   521.132] (II) fglrx(0): Display0 EDID data ---------------------------
[   521.132] (II) fglrx(0): Manufacturer: LGD  Model: 34b  Serial#: 0
[   521.132] (II) fglrx(0): Year: 2011  Week: 0
[   521.132] (II) fglrx(0): EDID Version: 1.3
[   521.132] (II) fglrx(0): Digital Display Input
[   521.132] (II) fglrx(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[   521.132] (II) fglrx(0): Gamma: 2.20
[   521.132] (II) fglrx(0): No DPMS capabilities specified
[   521.132] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   521.132] (II) fglrx(0): First detailed timing is preferred mode
[   521.132] (II) fglrx(0): redX: 0.587 redY: 0.349   greenX: 0.336 greenY: 0.563
[   521.132] (II) fglrx(0): blueX: 0.157 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[   521.132] (II) fglrx(0): Manufacturer's mask: 0
[   521.132] (II) fglrx(0): Supported detailed timing:
[   521.132] (II) fglrx(0): clock: 69.3 MHz   Image Size:  345 x 194 mm
[   521.132] (II) fglrx(0): h_active: 1366  h_sync: 1398  h_sync_end 1430 h_blank_end 1470 h_border: 0
[   521.132] (II) fglrx(0): v_active: 768  v_sync: 773  v_sync_end 776 v_blanking: 786 v_border: 0
[   521.132] (II) fglrx(0):  LG Display
[   521.132] (II) fglrx(0):  LP156WH3-TLE1
[   521.132] (II) fglrx(0): EDID (in hex):
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): End of Display0 EDID data --------------------
[   521.132] (II) fglrx(0): Dynamic Surface Resizing Enabled
[   521.132] (WW) fglrx(0): Failed to get EDID by ACPI
[   521.132] (II) fglrx(0): EDID for output LVDS
[   521.132] (II) fglrx(0): Manufacturer: LGD  Model: 34b  Serial#: 0
[   521.132] (II) fglrx(0): Year: 2011  Week: 0
[   521.132] (II) fglrx(0): EDID Version: 1.3
[   521.132] (II) fglrx(0): Digital Display Input
[   521.132] (II) fglrx(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[   521.132] (II) fglrx(0): Gamma: 2.20
[   521.132] (II) fglrx(0): No DPMS capabilities specified
[   521.132] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[   521.132] (II) fglrx(0): First detailed timing is preferred mode
[   521.132] (II) fglrx(0): redX: 0.587 redY: 0.349   greenX: 0.336 greenY: 0.563
[   521.132] (II) fglrx(0): blueX: 0.157 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[   521.132] (II) fglrx(0): Manufacturer's mask: 0
[   521.132] (II) fglrx(0): Supported detailed timing:
[   521.132] (II) fglrx(0): clock: 69.3 MHz   Image Size:  345 x 194 mm
[   521.132] (II) fglrx(0): h_active: 1366  h_sync: 1398  h_sync_end 1430 h_blank_end 1470 h_border: 0
[   521.132] (II) fglrx(0): v_active: 768  v_sync: 773  v_sync_end 776 v_blanking: 786 v_border: 0
[   521.132] (II) fglrx(0):  LG Display
[   521.132] (II) fglrx(0):  LP156WH3-TLE1
[   521.132] (II) fglrx(0): EDID (in hex):
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.132] (II) fglrx(0): 	***
[   521.133] (II) fglrx(0): 	***
[   521.133] (II) fglrx(0): 	***
[   521.133] (II) fglrx(0): 	***
[   521.133] (II) fglrx(0): 	***
[   521.133] (II) fglrx(0): EDID vendor "LGD", prod id 843
[   521.133] (II) fglrx(0): Printing DDC gathered Modelines:
[   521.133] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1430 1470  768 773 776 786 -hsync -vsync (47.1 kHz eP)
[   521.134] (II) fglrx(0): Printing probed modes for output LVDS
[   521.134] (II) fglrx(0): Modeline "1366x768"x60.0   69.30  1366 1398 1430 1470  768 773 776 786 -hsync -vsync (47.1 kHz eP)
[   521.134] (II) fglrx(0): Modeline "1360x768"x60.0   69.30  1360 1398 1430 1470  768 773 776 786 -hsync -vsync (47.1 kHz e)
[   521.134] (II) fglrx(0): Modeline "1280x768"x60.0   69.30  1280 1398 1430 1470  768 773 776 786 -hsync -vsync (47.1 kHz e)
[   521.134] (II) fglrx(0): Modeline "1280x720"x60.0   69.30  1280 1398 1430 1470  720 773 776 786 -hsync -vsync (47.1 kHz e)
[   521.134] (II) fglrx(0): Modeline "1024x768"x60.0   69.30  1024 1398 1430 1470  768 773 776 786 -hsync -vsync (47.1 kHz e)
[   521.134] (II) fglrx(0): Modeline "1024x600"x60.0   69.30  1024 1398 1430 1470  600 773 776 786 -hsync -vsync (47.1 kHz e)
[   521.134] (II) fglrx(0): Modeline "800x600"x60.0   69.30  800 1398 1430 1470  600 773 776 786 -hsync -vsync (47.1 kHz e)
[   521.134] (II) fglrx(0): Modeline "800x480"x60.0   69.30  800 1398 1430 1470  480 773 776 786 -hsync -vsync (47.1 kHz e)
[   521.134] (II) fglrx(0): Modeline "640x480"x60.0   69.30  640 1398 1430 1470  480 773 776 786 -hsync -vsync (47.1 kHz e)
[   521.134] (II) fglrx(0): EDID for output DFP1
[   521.134] (II) fglrx(0): EDID for output CRT1
[   521.134] (II) fglrx(0): Output LVDS connected
[   521.134] (II) fglrx(0): Output DFP1 disconnected
[   521.134] (II) fglrx(0): Output CRT1 disconnected
[   521.134] (II) fglrx(0): Using exact sizes for initial modes
[   521.134] (II) fglrx(0): Output LVDS using initial mode 1366x768
[   521.134] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   521.134] (II) fglrx(0): Display dimensions: (350, 190) mm
[   521.134] (II) fglrx(0): DPI set to (99, 102)
[   521.134] (II) fglrx(0): Eyefinity capable adapter detected.
[   521.134] (II) fglrx(0): Adapter AMD Radeon HD 7520G has 4 configurable heads and 1 displays connected.
[   521.134] (==) fglrx(0):  PseudoColor visuals disabled
[   521.135] (II) Loading sub module "ramdac"
[   521.135] (II) LoadModule: "ramdac"
[   521.135] (II) Module "ramdac" already built-in
[   521.135] (==) fglrx(0): NoDRI = NO
[   521.135] (==) fglrx(0): Capabilities: 0x00000000
[   521.135] (==) fglrx(0): CapabilitiesEx: 0x00000000
[   521.135] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[   521.135] (==) fglrx(0): UseFastTLS=0
[   521.135] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[   521.135] (--) Depth 24 pixmap format is 32 bpp
[   521.135] (II) fglrx(0): doing swlDriScreenInit
[   521.135] (II) fglrx(0): swlDriScreenInit for fglrx driver
[   521.135] ukiDynamicMajor: found major device number 248
[   521.135] ukiDynamicMajor: found major device number 248
[   521.135] ukiDynamicMajor: found major device number 248
[   521.135] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   521.135] ukiOpenDevice: node name is /dev/ati/card0
[   521.135] ukiOpenDevice: open result is 13, (OK)
[   521.135] ukiOpenByBusid: ukiOpenMinor returns 13
[   521.135] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   521.136] (II) fglrx(0): [uki] DRM interface version 1.0
[   521.136] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[   521.136] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[   521.136] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f1a82ae3000
[   521.136] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[   521.136] (II) fglrx(0): [uki] added 1 reserved context for kernel
[   521.136] (II) fglrx(0): swlDriScreenInit done
[   521.136] (II) fglrx(0): Kernel Module Version Information:
[   521.136] (II) fglrx(0):     Name: fglrx
[   521.136] (II) fglrx(0):     Version: 15.20.3
[   521.136] (II) fglrx(0):     Date: Sep  8 2015
[   521.136] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[   521.136] (II) fglrx(0): Kernel Module version matches driver.
[   521.136] (II) fglrx(0): Kernel Module Build Time Information:
[   521.136] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        4.5.1-1-ARCH
[   521.136] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[   521.136] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[   521.136] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[   521.136] (II) fglrx(0): [uki] register handle = 0x00004000
[   521.153] (II) fglrx(0): DRI initialization successfull
[   521.160] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[   521.167] (==) fglrx(0): Backing store enabled
[   521.167] (**) fglrx(0): DPMS enabled
[   521.167] (II) fglrx(0): Initialized in-driver Xinerama extension
[   521.167] (**) fglrx(0): Textured Video is enabled.
[   521.167] (II) LoadModule: "glesx"
[   521.167] (II) Loading /usr/lib/xorg/modules/glesx.so
[   521.451] (II) Module glesx: vendor="X.Org Foundation"
[   521.451] 	compiled for 1.4.99.906, module version = 1.0.0
[   521.451] (II) fglrx(0): GLESX enableFlags = 8784
[   521.459] (II) fglrx(0): GLESX is enabled
[   521.459] (II) LoadModule: "amdxmm"
[   521.459] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[   521.474] (II) Module amdxmm: vendor="X.Org Foundation"
[   521.474] 	compiled for 1.4.99.906, module version = 2.0.0
[   521.527] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[   521.532] (II) fglrx(0): Enable composite support successfully
[   521.532] (WW) fglrx(0): Option "VendorName" is not used
[   521.532] (WW) fglrx(0): Option "ModelName" is not used
[   521.532] (II) fglrx(0): X context handle = 0x1
[   521.532] (II) fglrx(0): [DRI] installation complete
[   521.532] (==) fglrx(0): Silken mouse enabled
[   521.544] (==) fglrx(0): Using HW cursor of display infrastructure!
[   521.545] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   521.553] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[   521.553] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[   524.067] (--) RandR disabled
[   524.097] ukiDynamicMajor: found major device number 248
[   524.097] ukiDynamicMajor: found major device number 248
[   524.097] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   524.097] ukiOpenDevice: node name is /dev/ati/card0
[   524.097] ukiOpenDevice: open result is 14, (OK)
[   524.097] ukiOpenByBusid: ukiOpenMinor returns 14
[   524.097] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   524.587] ukiDynamicMajor: found major device number 248
[   524.587] ukiDynamicMajor: found major device number 248
[   524.588] ukiDynamicMajor: found major device number 248
[   524.588] ukiOpenDevice: node name is /dev/ati/card0
[   524.588] ukiOpenDevice: open result is 15, (OK)
[   524.588] ukiGetBusid returned 'PCI:0:1:0'
[   524.588] ukiOpenDevice: node name is /dev/ati/card1
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: Open failed
[   524.588] ukiOpenDevice: node name is /dev/ati/card2
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: Open failed
[   524.588] ukiOpenDevice: node name is /dev/ati/card3
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: Open failed
[   524.588] ukiOpenDevice: node name is /dev/ati/card4
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: Open failed
[   524.588] ukiOpenDevice: node name is /dev/ati/card5
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: Open failed
[   524.588] ukiOpenDevice: node name is /dev/ati/card6
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: Open failed
[   524.588] ukiOpenDevice: node name is /dev/ati/card7
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: Open failed
[   524.588] ukiOpenDevice: node name is /dev/ati/card8
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.588] ukiOpenDevice: Open failed
[   524.588] ukiOpenDevice: node name is /dev/ati/card9
[   524.588] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: Open failed
[   524.589] ukiOpenDevice: node name is /dev/ati/card10
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: Open failed
[   524.589] ukiOpenDevice: node name is /dev/ati/card11
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: Open failed
[   524.589] ukiOpenDevice: node name is /dev/ati/card12
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: Open failed
[   524.589] ukiOpenDevice: node name is /dev/ati/card13
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: Open failed
[   524.589] ukiOpenDevice: node name is /dev/ati/card14
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: Open failed
[   524.589] ukiOpenDevice: node name is /dev/ati/card15
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: open result is -1, (No such device)
[   524.589] ukiOpenDevice: Open failed
[   524.589] ukiDynamicMajor: found major device number 248
[   524.589] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   524.589] ukiOpenDevice: node name is /dev/ati/card0
[   524.589] ukiOpenDevice: open result is 15, (OK)
[   524.589] ukiOpenByBusid: ukiOpenMinor returns 15
[   524.589] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   525.588] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[   525.598] ukiDynamicMajor: found major device number 248
[   525.598] ukiDynamicMajor: found major device number 248
[   525.598] ukiDynamicMajor: found major device number 248
[   525.598] ukiOpenDevice: node name is /dev/ati/card0
[   525.598] ukiOpenDevice: open result is 16, (OK)
[   525.598] ukiGetBusid returned 'PCI:0:1:0'
[   525.598] ukiOpenDevice: node name is /dev/ati/card1
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card2
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card3
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card4
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card5
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card6
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card7
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card8
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card9
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card10
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card11
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: Open failed
[   525.598] ukiOpenDevice: node name is /dev/ati/card12
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.598] ukiOpenDevice: open result is -1, (No such device)
[   525.599] ukiOpenDevice: Open failed
[   525.599] ukiOpenDevice: node name is /dev/ati/card13
[   525.599] ukiOpenDevice: open result is -1, (No such device)
[   525.599] ukiOpenDevice: open result is -1, (No such device)
[   525.599] ukiOpenDevice: Open failed
[   525.599] ukiOpenDevice: node name is /dev/ati/card14
[   525.599] ukiOpenDevice: open result is -1, (No such device)
[   525.599] ukiOpenDevice: open result is -1, (No such device)
[   525.599] ukiOpenDevice: Open failed
[   525.599] ukiOpenDevice: node name is /dev/ati/card15
[   525.599] ukiOpenDevice: open result is -1, (No such device)
[   525.599] ukiOpenDevice: open result is -1, (No such device)
[   525.599] ukiOpenDevice: Open failed
[   525.599] ukiDynamicMajor: found major device number 248
[   525.599] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[   525.599] ukiOpenDevice: node name is /dev/ati/card0
[   525.599] ukiOpenDevice: open result is 16, (OK)
[   525.599] ukiOpenByBusid: ukiOpenMinor returns 16
[   525.599] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[   525.767] (II) fglrx(0): Setting screen physical size to 361 x 203
[   526.102] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   526.102] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   526.102] (II) LoadModule: "evdev"
[   526.102] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   526.113] (II) Module evdev: vendor="X.Org Foundation"
[   526.113] 	compiled for 1.17.4, module version = 2.10.0
[   526.113] 	Module class: X.Org XInput Driver
[   526.113] 	ABI class: X.Org XInput driver, version 21.1
[   526.114] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 17 paused 0
[   526.114] (II) Using input driver 'evdev' for 'Power Button'
[   526.114] (**) Power Button: always reports core events
[   526.114] (**) evdev: Power Button: Device: "/dev/input/event4"
[   526.114] (--) evdev: Power Button: Vendor 0 Product 0x1
[   526.114] (--) evdev: Power Button: Found keys
[   526.114] (II) evdev: Power Button: Configuring as keyboard
[   526.114] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[   526.114] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   526.115] (**) Option "xkb_rules" "evdev"
[   526.116] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   526.116] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   526.117] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 18 paused 0
[   526.117] (II) Using input driver 'evdev' for 'Video Bus'
[   526.117] (**) Video Bus: always reports core events
[   526.117] (**) evdev: Video Bus: Device: "/dev/input/event5"
[   526.117] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   526.117] (--) evdev: Video Bus: Found keys
[   526.117] (II) evdev: Video Bus: Configuring as keyboard
[   526.117] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[   526.117] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   526.117] (**) Option "xkb_rules" "evdev"
[   526.118] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   526.118] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   526.119] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 19 paused 0
[   526.120] (II) Using input driver 'evdev' for 'Power Button'
[   526.120] (**) Power Button: always reports core events
[   526.120] (**) evdev: Power Button: Device: "/dev/input/event1"
[   526.120] (--) evdev: Power Button: Vendor 0 Product 0x1
[   526.120] (--) evdev: Power Button: Found keys
[   526.120] (II) evdev: Power Button: Configuring as keyboard
[   526.120] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[   526.120] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   526.120] (**) Option "xkb_rules" "evdev"
[   526.121] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   526.121] (II) No input driver specified, ignoring this device.
[   526.121] (II) This device may have been added with another device file.
[   526.121] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   526.122] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   526.123] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[   526.123] (II) Using input driver 'evdev' for 'Sleep Button'
[   526.123] (**) Sleep Button: always reports core events
[   526.123] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   526.123] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   526.123] (--) evdev: Sleep Button: Found keys
[   526.123] (II) evdev: Sleep Button: Configuring as keyboard
[   526.123] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[   526.123] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   526.123] (**) Option "xkb_rules" "evdev"
[   526.124] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event8)
[   526.124] (II) No input driver specified, ignoring this device.
[   526.124] (II) This device may have been added with another device file.
[   526.124] (II) config/udev: Adding input device 2.4G wireless USB Device 2.4G wireless USB Device (/dev/input/event13)
[   526.124] (**) 2.4G wireless USB Device 2.4G wireless USB Device: Applying InputClass "evdev pointer catchall"
[   526.124] (**) 2.4G wireless USB Device 2.4G wireless USB Device: Applying InputClass "evdev keyboard catchall"
[   526.125] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 21 paused 0
[   526.125] (II) Using input driver 'evdev' for '2.4G wireless USB Device 2.4G wireless USB Device'
[   526.125] (**) 2.4G wireless USB Device 2.4G wireless USB Device: always reports core events
[   526.125] (**) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Device: "/dev/input/event13"
[   526.125] (--) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Vendor 0x279e Product 0x24e
[   526.125] (--) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Found 12 mouse buttons
[   526.125] (--) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Found scroll wheel(s)
[   526.125] (--) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Found relative axes
[   526.125] (--) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Found x and y relative axes
[   526.125] (--) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Found keys
[   526.125] (II) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Configuring as mouse
[   526.125] (II) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Configuring as keyboard
[   526.125] (II) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Adding scrollwheel support
[   526.125] (**) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: YAxisMapping: buttons 4 and 5
[   526.125] (**) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   526.125] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb3/3-2/3-2:1.0/0003:279E:024E.0001/input/input14/event13"
[   526.125] (II) XINPUT: Adding extended input device "2.4G wireless USB Device 2.4G wireless USB Device" (type: KEYBOARD, id 10)
[   526.125] (**) Option "xkb_rules" "evdev"
[   526.125] (II) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: initialized for relative axes.
[   526.126] (**) 2.4G wireless USB Device 2.4G wireless USB Device: (accel) keeping acceleration scheme 1
[   526.126] (**) 2.4G wireless USB Device 2.4G wireless USB Device: (accel) acceleration profile 0
[   526.126] (**) 2.4G wireless USB Device 2.4G wireless USB Device: (accel) acceleration factor: 2.000
[   526.126] (**) 2.4G wireless USB Device 2.4G wireless USB Device: (accel) acceleration threshold: 4
[   526.126] (II) config/udev: Adding input device 2.4G wireless USB Device 2.4G wireless USB Device (/dev/input/mouse1)
[   526.126] (II) No input driver specified, ignoring this device.
[   526.126] (II) This device may have been added with another device file.
[   526.127] (II) config/udev: Adding input device 2.4G wireless USB Device 2.4G wireless USB Device (/dev/input/event14)
[   526.127] (**) 2.4G wireless USB Device 2.4G wireless USB Device: Applying InputClass "evdev keyboard catchall"
[   526.128] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 22 paused 0
[   526.128] (II) Using input driver 'evdev' for '2.4G wireless USB Device 2.4G wireless USB Device'
[   526.128] (**) 2.4G wireless USB Device 2.4G wireless USB Device: always reports core events
[   526.128] (**) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Device: "/dev/input/event14"
[   526.128] (--) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Vendor 0x279e Product 0x24e
[   526.128] (--) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Found keys
[   526.128] (II) evdev: 2.4G wireless USB Device 2.4G wireless USB Device: Configuring as keyboard
[   526.128] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb3/3-2/3-2:1.1/0003:279E:024E.0002/input/input15/event14"
[   526.128] (II) XINPUT: Adding extended input device "2.4G wireless USB Device 2.4G wireless USB Device" (type: KEYBOARD, id 11)
[   526.128] (**) Option "xkb_rules" "evdev"
[   526.129] (II) config/udev: Adding input device 2.4G wireless USB Device 2.4G wireless USB Device (/dev/input/event15)
[   526.129] (II) No input driver specified, ignoring this device.
[   526.129] (II) This device may have been added with another device file.
[   526.130] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event16)
[   526.130] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[   526.130] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 23 paused 0
[   526.130] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
[   526.130] (**) Lenovo EasyCamera: always reports core events
[   526.130] (**) evdev: Lenovo EasyCamera: Device: "/dev/input/event16"
[   526.130] (--) evdev: Lenovo EasyCamera: Vendor 0x4f2 Product 0xb2e2
[   526.130] (--) evdev: Lenovo EasyCamera: Found keys
[   526.130] (II) evdev: Lenovo EasyCamera: Configuring as keyboard
[   526.130] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb5/5-4/5-4:1.0/input/input17/event16"
[   526.130] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 12)
[   526.130] (**) Option "xkb_rules" "evdev"
[   526.131] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[   526.131] (II) No input driver specified, ignoring this device.
[   526.131] (II) This device may have been added with another device file.
[   526.131] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event10)
[   526.132] (II) No input driver specified, ignoring this device.
[   526.132] (II) This device may have been added with another device file.
[   526.132] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event11)
[   526.132] (II) No input driver specified, ignoring this device.
[   526.132] (II) This device may have been added with another device file.
[   526.132] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event6)
[   526.132] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[   526.133] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 24 paused 0
[   526.133] (II) Using input driver 'evdev' for 'Ideapad extra buttons'
[   526.133] (**) Ideapad extra buttons: always reports core events
[   526.133] (**) evdev: Ideapad extra buttons: Device: "/dev/input/event6"
[   526.133] (--) evdev: Ideapad extra buttons: Vendor 0 Product 0
[   526.133] (--) evdev: Ideapad extra buttons: Found keys
[   526.133] (II) evdev: Ideapad extra buttons: Configuring as keyboard
[   526.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.3/PNP0C09:00/VPC2004:00/input/input7/event6"
[   526.133] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 13)
[   526.133] (**) Option "xkb_rules" "evdev"
[   526.134] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   526.134] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   526.134] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 25 paused 0
[   526.134] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   526.134] (**) AT Translated Set 2 keyboard: always reports core events
[   526.134] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   526.134] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   526.134] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   526.134] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   526.134] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   526.134] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[   526.134] (**) Option "xkb_rules" "evdev"
[   526.135] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[   526.135] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   526.135] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[   526.136] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 26 paused 0
[   526.136] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[   526.136] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   526.136] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event12"
[   526.136] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   526.136] (--) evdev: SynPS/2 Synaptics TouchPad: Found 1 mouse buttons
[   526.136] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[   526.136] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[   526.136] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[   526.136] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[   526.136] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[   526.136] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[   526.136] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   526.136] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event12"
[   526.136] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[   526.136] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[   526.137] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   526.137] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[   526.137] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   526.137] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   526.137] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[   526.137] (II) No input driver specified, ignoring this device.
[   526.137] (II) This device may have been added with another device file.
[   526.137] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   526.137] (II) No input driver specified, ignoring this device.
[   526.137] (II) This device may have been added with another device file.
[   526.143] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[   527.069] (WW) fglrx(0): Failed to get EDID by ACPI
[   527.069] (II) fglrx(0): EDID vendor "LGD", prod id 843
[   527.069] (II) fglrx(0): Printing DDC gathered Modelines:
[   527.069] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1430 1470  768 773 776 786 -hsync -vsync (47.1 kHz eP)
[   527.636] (WW) fglrx(0): Failed to get EDID by ACPI
[   527.636] (II) fglrx(0): EDID vendor "LGD", prod id 843
[   527.636] (II) fglrx(0): Printing DDC gathered Modelines:
[   527.636] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1430 1470  768 773 776 786 -hsync -vsync (47.1 kHz eP)
[   532.643] (II) AIGLX: Suspending AIGLX clients for VT switch
[   532.644] (II) fglrx(0): Backup framebuffer data.
[   532.653] (II) fglrx(0): Backup complete.
[   535.103] (II) systemd-logind: got pause for 13:69
[   535.103] (II) systemd-logind: got pause for 13:80
[   535.103] (II) systemd-logind: got pause for 13:77
[   535.103] (II) systemd-logind: got pause for 13:66
[   535.103] (II) systemd-logind: got pause for 13:78
[   535.103] (II) systemd-logind: got pause for 13:68
[   535.103] (II) systemd-logind: got pause for 13:70
[   535.103] (II) systemd-logind: got pause for 13:76
[   535.103] (II) systemd-logind: got pause for 13:65
[   535.103] (II) systemd-logind: got pause for 13:64
[   879.840] (II) systemd-logind: got resume for 13:69
[   880.024] (II) AIGLX: Resuming AIGLX clients after VT switch
[   882.593] (WW) fglrx(0): Failed to get EDID by ACPI
[   882.593] (II) fglrx(0): EDID vendor "LGD", prod id 843
[   882.593] (II) fglrx(0): Printing DDC gathered Modelines:
[   882.593] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1430 1470  768 773 776 786 -hsync -vsync (47.1 kHz eP)
[   882.643] (II) AIGLX: Suspending AIGLX clients for VT switch
[   882.643] (II) fglrx(0): Backup framebuffer data.
[   882.650] (II) fglrx(0): Backup complete.
[   882.674] (II) AIGLX: Resuming AIGLX clients after VT switch
[   882.913] (WW) fglrx(0): Failed to get EDID by ACPI
[   882.913] (II) fglrx(0): EDID vendor "LGD", prod id 843
[   882.913] (II) fglrx(0): Printing DDC gathered Modelines:
[   882.913] (II) fglrx(0): Modeline "1366x768"x0.0   69.30  1366 1398 1430 1470  768 773 776 786 -hsync -vsync (47.1 kHz eP)
[   882.963] (II) systemd-logind: got resume for 13:80
[   882.963] (II) systemd-logind: got resume for 13:77
[   882.963] (II) systemd-logind: got resume for 13:66
[   882.963] (II) systemd-logind: got resume for 13:78
[   882.963] (II) systemd-logind: got resume for 13:68
[   882.963] (II) systemd-logind: got resume for 13:70
[   882.963] (II) systemd-logind: got resume for 13:76
[   882.964] (II) systemd-logind: got resume for 13:65
[   882.964] (II) systemd-logind: got resume for 13:64
[   889.684] (II) AIGLX: Suspending AIGLX clients for VT switch
[   889.684] (II) fglrx(0): Backup framebuffer data.
[   889.689] (II) fglrx(0): Backup complete.
[   892.061] (II) systemd-logind: got pause for 13:69
[   892.061] (II) systemd-logind: got pause for 13:80
[   892.061] (II) systemd-logind: got pause for 13:77
[   892.061] (II) systemd-logind: got pause for 13:66
[   892.061] (II) systemd-logind: got pause for 13:78
[   892.062] (II) systemd-logind: got pause for 13:68
[   892.062] (II) systemd-logind: got pause for 13:70
[   892.062] (II) systemd-logind: got pause for 13:76
[   892.062] (II) systemd-logind: got pause for 13:65
[   892.062] (II) systemd-logind: got pause for 13:64
Xorg.conf

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:0:1:0"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
tekma
6 лет, 4 месяца назад (отредактировано 6 лет, 4 месяца назад)
Темы: 10
Сообщения: 36
Участник с: 03 мая 2016 
modprobe.blacklist=sp5100_tco
и проблема решилась)
P.S. косяк ядра 4.5 и AMD A* CPU
tekma
6 лет, 4 месяца назад (отредактировано 6 лет, 4 месяца назад)
Темы: 10
Сообщения: 36
Участник с: 03 мая 2016
kurych
Дык, включите ноут и проведите тесты до конца. Ваша ошибка четко указывает на железные проблемы.
Либо форматируйте с проверкой на бедблоки, но все равно это ненадолго. (ИМХО)
fsck -t -y -f -c
говорит (0/0/0 errors)

По поводу тестов - это был повторный который оборвали.
Если проблема явно железная(я тоже сначала к этому склонялся), то почему Ф23 нормально стартует и ни на что не ругается?
tekma
6 лет, 4 месяца назад (отредактировано 6 лет, 4 месяца назад)
Темы: 10
Сообщения: 36
Участник с: 03 мая 2016
Здравствуйте!
Есть свежеустановленная система ArchLinux(поставлены только base, base-devl, grub-bios), при попытке загрузиться в неё вижу сообщение

Failed command: READ DMA
...
и дальше система не грузится(доходит до kernel panic).

Сообщение возникает при попытке подмонтировать разделы tmp, var, home, boot, в общем всего кроме root - root монтируется удачно и fsck его проверяет. SmartMonTools ни каких ошибок не показывает, mHDD говорит что hdd просто идеальный. Пробовал файловые системы ext4 и ext3.
При использовании ext4 с параметром ядра libata.force=noncq ещё есть вот такая вот ошибка

EXT_4 fs error: _ext4_get_inode_loc unable to read itable block
Грешу на ядро арча, тк если установить RFRemix(Fedora) 23 - всё работает просто идеально.

Прошу совета в какую сторону копать. Заранее спасибо!
HDD: SAMSUNG Spinpoint M8 ST1000LM024 (HN-M101MBB)
Kernel: 4.4.5-1
Notebook: Lenovo P585
smartctl -a /dev/sda1

smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.5-1-ARCH] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST1000LM024 HN-M101MBB
Serial Number:    S2U5J9EC831769
LU WWN Device Id: 5 0004cf 2083a59e1
Firmware Version: 2AR10001
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Tue May  3 07:09:09 2016 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  39)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline
data collection: 		(13140) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 219) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       7
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   089   088   025    Pre-fail  Always       -       3452
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1609
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       1335
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       46
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1695
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       236
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   063   040   000    Old_age   Always       -       37 (Min/Max 18/61)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       4347
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       46
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       8109

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Interrupted (host reset)      70%      1332         -
# 2  Short offline       Completed without error       00%      1331         -
# 3  Vendor (0x50)       Completed without error       00%         1         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Interrupted [70% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Interrupted (host reset) - при повторном сканировании выключили ноут.
 

© 2006-2022, Русскоязычное сообщество Arch Linux.
Название и логотип Arch Linux ™ являются признанными торговыми марками.
Linux ® — зарегистрированная торговая марка Linus Torvalds и LMI.