Unknown hardware: "HDA-Intel" "SigmaTel STAC9200" "HDA:14f12bfa,14f100c3,00090000 HDA:83847690,102801f5,00102201" "0x1028" "0x01f5"
Hardware is initialized using a guess method
/usr/sbin/alsactl: set_control:1266: failed to obtain info for control #6 (No such file or directory)
No state is present for card pcsp
Unknown hardware: "PC-Speaker" "PC-Speaker" "" "" ""
Hardware is initialized using a guess method
No state is present for card pcsp

pacman -Suy

# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x4f974f97
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        3188    25607578+   7  HPFS/NTFS
/dev/sda2            3189       30401   218588422+   f  W95 Ext'd (LBA)
/dev/sda5            3189       22310   153597433+   7  HPFS/NTFS
/dev/sda6           22311       22560     2008093+  82  Linux swap / Solaris
/dev/sda7   *       22561       24384    14651248+  83  Linux
/dev/sda8           24385       27362    23920753+  83  Linux
/dev/sda9           27363       30401    24410736   83  Linux

# cat /etc/fstab
# /etc/fstab: static file system information
#
# <file system>        <dir>         <type>    <options>          <dump> <pass>
none                   /dev/pts      devpts    defaults            0      0
none                   /dev/shm      tmpfs     defaults            0      0
/dev/cdrom 	       /media/cdrom  auto    ro,user,noauto,unhide   0      0
/dev/dvd 	       /media/dvd    auto    ro,user,noauto,unhide   0      0
/dev/sda6	       swap 	     swap    defaults 		     0 	    0
/dev/sda7	       / 	     ext3    defaults 		     0      1
/dev/sda9	       /home 	     jfs     defaults 		     0      1

# cat /etc/rc.conf
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
LOCALE="ru_RU.UTF-8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Asia/Novosibirsk"
KEYMAP="ru"
CONSOLEFONT="/usr/share/kbd/consolefonts/cyr-sun16"
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
MOD_AUTOLOAD="yes"
MOD_BLACKLIST=(pcspkr) #deprecated
MODULES=(b44 mii bcm43xx snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
HOSTNAME="fitil"
#eth0="dhcp"
wlan0="dhcp"
INTERFACES=(wlan0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
 
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
DAEMONS=(syslog-ng wpa_supplicant network netfs crond alsa)

# cat /etc/mkinitcpio.conf
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
MODULES="pata_acpi pata_atiixp ata_generic scsi_mod ahci"
#MODULES="ahci"
# BINARIES
# This setting includes, into the CPIO image, and additional
# binaries a given user may wish.  This is run first, so may
# be used to override the actual binaries used in a given hook.
# (Existing files are NOT overwritten is already added)
# BINARIES are dependancy parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in anyway.  This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options,
# like so:
#    FILES="/etc/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'modload' may be used in place of 'udev', but is not recommended
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
#    This setup specifies all modules in the MODULES setting above.
#    No raid, lvm2, or encrypted root is needed.
#    HOOKS="base"
#
#    This setup will autodetect all modules for your system and should
#    work as a sane default
#    HOOKS="base udev autodetect pata scsi sata filesystems"
#
#    This is identical to the above, except the old ide subsystem is
#    used for IDE devices instead of the new pata subsystem.
#    HOOKS="base udev autodetect ide scsi sata filesystems"
#
#    This setup will generate a 'full' image which supports most systems.
#    No autodetection is done.
#    HOOKS="base udev pata scsi sata usb filesystems"
#
#    This setup assembles an pata raid array with an encrypted root FS.
#    Note: See 'mkinitcpio -H raid' for more information on raid devices.
#    HOOKS="base udev pata raid encrypt filesystems"
#
#    This setup loads an lvm2 volume group on a usb device.
#    HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata keymap filesystems"
#HOOKS="base udev autodetect sata keymap filesystems"

# hwdetect --show-sata
говорит: ahci

# mount /dev/sda9 /mnt/root/home
mount: wrong fs type, bad option, bad superblock on /dev/sda9,
            missing codepage or other error
            In some cases useful info is found in syslog - try
            dmesg | tail or so
# dmesg | tail
.............
JFS: nTxBlock = 7060, nTxLock = 56487

cd /mnt
mkdir root
mount /dev/sda7 /mnt/root
mount --bind /sys /mnt/root/sys
mount --bind /proc /mnt/root/proc
mount --bind /dev /mnt/root/dev
chroot /mnt/root
cd /var/cache/pacman/pkg
pacman -U kernel26-2.6.25.6-1-i686.pkg.tar.gz

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...... всякая всячина......
:: Loading Initramfs
:: Running Hook [udev]
:: Loading udev...input: AT Translated Set 2 keyboard as /class/input/input1
done.
:: Running Hook [keymap]
:: Loading keymap.../init: 5: /bin/kbd_mode: not found
/init: 5: /bin/loadkeys: not found
/init: 5: /bin/setfont: not found
done.
:: Running Hook [filesystems]
:: Loading root filesystem module...
Attempting to create root device '/dev/disk/by-uuid/6a6dddf6-8408-403c-9217-728cc8eade62'
ERROR: Failed to parse block devaice name for '/dev/disk/by-uuid/6a6dddf6-8408-403c-9217-728cc8eade62'
unknown
ERROR: root fs cannot be detected. Try using the rootfstype= krnel parameter.
Waiting for devices to settle...done
Root device '/dev/disk/by-uuid/6a6dddf6-8408-403c-9217-728cc8eade62' doesn't exist, attempting to create it
ERROR: Failed to parse block device name for '/dev/disk/by-uuid/6a6dddf6-8408-403c-9217-728cc8eade62'
ERROR: Unable to create/detect root device '/dev/disk/by-uuid/6a6dddf6-8408-403c-9217-728cc8eade62'
Dropping to a recovery shell... type 'exit' to reboot
NOTE: klibc contains no 'ls' binary, use 'echo *' instead
If the device '/dev/disk/by-uuid/6a6dddf6-8408-403c-9217-728cc8eade62' gets created while you are here,
try adding 'rootdelay=8' or higher to the kernel comanf-line
ramfs$ _

IgnorePkg = kernel