saff
10 лет, 3 месяца назад
Темы: 3
Сообщения: 16
Участник с: 27 апреля 2012
загружаю slim через inittab, после его успешной загрузки логинюсь, а он вновь загружает слим
xinitrc - там и с ck-launch-session и без пытался, не в этом дело
dbus запускаю
в логах слим ругается, что xfce4 не может открыть окно, мол x сервер уже запущен
saff
10 лет, 4 месяца назад
Темы: 3
Сообщения: 16
Участник с: 27 апреля 2012
slim же запускается, все классно, красивый такой. а вот после залогинивания ничего не происходит. по этому уровень его загрузки ничего не поменяет, или я не прав?
до сегодняшнего дня все работало) стоило только обновиться.
при этом я еще ядро скомпилил, но его не менял. Правда после дня молитв и скорби уже готов поверить и в причастность этого
saff
10 лет, 4 месяца назад
Темы: 3
Сообщения: 16
Участник с: 27 апреля 2012
вот slim.log, последняя половина
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Fri Apr 27 10:56:14 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
No protocol specified
waiting for X server to begin accepting connections .
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specified
..
No protocol specifiServer terminated successfully (0). Closing log file.
xinit: server error
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:00:20 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
slim: unexpected signal 15
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:25:57 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
/usr/bin/xauth:  file /home/saff/.Xauthority does not exist
/usr/bin/startxfce4: X server already running on display :0.0
No protocol specified
xrdb: Can't open display ':0.0'
No protocol specified
No protocol specified
** (xfce4-session:690): ERROR **: Не удалось открыть дисплей: 
/etc/xdg/xfce4/xinitrc: line 221:   690 Ловушка трассировки/останова                              xfce4-session
running 'kill -INT 680; rm -f /home/saff/.cache/gpg-agent-info'
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:26:07 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
slim: pam_authentication(): Authentication failure
/usr/bin/xauth:  file /home/saff/.Xauthority does not exist
/usr/bin/startxfce4: X server already running on display :0.0
No protocol specified
xrdb: Resource temporarily unavailable
xrdb: Can't open display ':0.0'
No protocol specified
No protocol specified
** (xfce4-session:784): ERROR **: Не удалось открыть дисплей: 
/etc/xdg/xfce4/xinitrc: line 22
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:45:10 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
slim: pam_authentication(): Authentication failure
/usr/bin/xauth:  file /home/saff/.Xauthority does not exist
/usr/bin/startxfce4: X server already running on display :0.0
No protocol specified
xrdb: Resource temporarily unavailable
xrdb: Can't open display ':0.0'
No protocol specified
No protocol specified
** (xfce4-session:839): ERROR **: Не удалось открыть дисплей: 
/etc/xdg/xfce4/xinitrc: line 221:   839 Ловушка трассировки/останова                              xfce4-session
running 'kill -INT 829; rm -f /home/saff/.cache/gpg-agent-info'
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:46:47 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
slim: unexpected signal 15
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:47:28 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
/usr/bin/xauth:  file /home/saff/.Xauthority does not exist
/usr/bin/startxfce4: X server already running on display :0.0
No protocol specified
xrdb: Resource temporarily unavailable
xrdb: Can't open display ':0.0'
No protocol specified
No protocol specified
** (xfce4-session:673): ERROR **: Не удалось открыть дисплей: 
/etc/xdg/xfce4/xinitrc: line 221:   673 Ловушка трасси
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:47:38 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
slim: unexpected signal 15
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:51:10 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
/usr/bin/xauth:  file /home/saff/.Xauthority does not exist
No protocol specified
/usr/bin/startxfce4: X server already running on display :0.0
No protocol specified
xrdb: Resource temporarily unavailable
xrdb: Can't open display ':0.0'
No protocol specified
** (xfce4-session:677): ERROR **: Не удалось открыть дисплей: 
/etc/xdg/xfce4/xinitrc: line 221:   677 Ловушка трассировки/останова                              xfce4-session
running 'kill -INT 667; rm -f /home/saff/.cache/gpg-agent-info'
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 11:51:23 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
slim: unexpected signal 15
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
/usr/bin/xauth:  file /var/run/slim.auth does not exist
slim: waiting for X server to begin accepting connections
X.Org X Server 1.12.1
Release Date: 2012-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.3.1-1-ARCH i686 
Current Operating System: Linux myhost 3.3.3-1-ARCH #1 SMP PREEMPT Mon Apr 23 09:33:32 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4 ro quiet vga=791 splash
Build Date: 14 April 2012  07:32:51AM
 
Current version of pixman: 0.24.4
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 27 13:14:24 2012
(==) Using config directory: "/etc/X11/xorg.conf.d"
.
slim: unexpected signal 15
slim: waiting for X server to shut downServer terminated successfully (0). Closing log file.
saff
10 лет, 4 месяца назад
Темы: 3
Сообщения: 16
Участник с: 27 апреля 2012
у меня не работало даже когда в .xinitrc было
exec startxfce4
вот мой slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path        /bin:/usr/bin:/usr/local/bin
default_xserver     /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd            /sbin/shutdown -h now
reboot_cmd          /sbin/shutdown -r now
console_cmd         /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd        /usr/sbin/suspend
# Full path to the xauth binary
xauth_path         /usr/bin/xauth 
# Xauth file for server
authfile           /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock             on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor          false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
#
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd           exec /bin/sh - ~/.xinitrc %session
login_cmd           exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
#
# sessionstart_cmd	some command
# sessionstop_cmd	some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon	yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions            xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd      import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg         Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg         Session: 
# shutdown / reboot messages
shutdown_msg       The system is halting...
reboot_msg         The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user        saff
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password      no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login          no
# current theme, use comma separated list to specify a set to 
# randomly choose from
current_theme       archlinux-simplyblack
# Lock file
lockfile            /var/lock/slim.lock
# Log file
logfile             /var/log/slim.log
saff
10 лет, 4 месяца назад
Темы: 3
Сообщения: 16
Участник с: 27 апреля 2012
xinitrc в домашней
вот inittab
#
# /etc/inittab
#
#  Runlevels:
#    0    Halt
#    1(S)	Single-user
#    2    Not used
#    3    Multi-user
#    4    Not used
#    5    X11
#    6    Reboot
## Only one of the following two lines can be uncommented!
# Boot to console
#id:3:initdefault:
# Boot to X11
id:5:initdefault:
rc::sysinit:/etc/rc.sysinit
rs:S1:wait:/etc/rc.single
rm:2345:wait:/etc/rc.multi
rh:06:wait:/etc/rc.shutdown
su:S:wait:/sbin/sulogin -p
# -8 options fixes umlauts problem on login
c1:2345:respawn:/sbin/agetty -8 -s 38400 tty1 linux
c2:2345:respawn:/sbin/agetty -8 -s 38400 tty2 linux
c3:2345:respawn:/sbin/agetty -8 -s 38400 tty3 linux
c4:2345:respawn:/sbin/agetty -8 -s 38400 tty4 linux
c5:2345:respawn:/sbin/agetty -8 -s 38400 tty5 linux
c6:2345:respawn:/sbin/agetty -8 -s 38400 tty6 linux
# Serial Virtual Console for KVM and others VMs
#s0:2345:respawn:/sbin/agetty -8 -s 9600 ttyS0 linux
# Hypervisor Virtual Console for Xen and KVM
#h0:2345:respawn:/sbin/agetty -8 -s 38400 hvc0 linux
ca::ctrlaltdel:/sbin/shutdown -t3 -r now
# Example lines for starting a login manager
#x:5:respawn:/usr/bin/xdm -nodaemon
#x:5:respawn:/usr/sbin/gdm -nodaemon
#x:5:respawn:/usr/bin/kdm -nodaemon
x:5:respawn:/usr/bin/slim >/dev/null 2>&1
# End of file
saff
10 лет, 4 месяца назад
Темы: 3
Сообщения: 16
Участник с: 27 апреля 2012
при попытке залогинится slim не долго думая перезагружается себя.
спросите такие файлы, как .xinitrc?
#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
exec ck-launch-session dbus-launch --exit-with-session startxfce4
из терминала xfce стартует хорошо. но это не удобно=)
такие советы, как поменять slim на что-то другое, я могу дать себе сам.. охота решить именно эту проблему
 

© 2006-2022, Русскоязычное сообщество Arch Linux.
Название и логотип Arch Linux ™ являются признанными торговыми марками.
Linux ® — зарегистрированная торговая марка Linus Torvalds и LMI.