#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
  for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
  done
  unset f
fi
# exec gnome-session
# exec startkde
#exec startxfce4
# ...or the Window Manager of your choice
#exec ck-launch-session dbus-launch --exit-with-session startxfce4
#login_cmd exec ck-launch-session /bin/bash -login ~/.xinitrc %session
#exec ck-launch-session dbus-launch openbox-session
exec startxfce4

#
# /etc/rc.conf - Main Configuration for Arch Linux
#
# -----------------------------------------------------------------------
# LOCALIZATION
# -----------------------------------------------------------------------
#
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
#   in the hardware clock being left untouched (useful for virtualization)
#   Note: Using "localtime" is discouraged, using "" makes hwclock fall back
#   to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
#   Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
#
LOCALE="ru_RU.UTF-8"
DAEMON_LOCALE="yes"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Samara"
KEYMAP="ru"
CONSOLEFONT="cyr-sun16"
CONSOLEMAP=
USECOLOR="yes"
# -----------------------------------------------------------------------
# HARDWARE
# -----------------------------------------------------------------------
#
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
#   Replace every !module by an entry as on the following line in a file in
#   /etc/modprobe.d:
#     blacklist module
#   See "man modprobe.conf" for details.
#
MODULES=(fuse)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
#
HOSTNAME="lshkn-N61VG"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
#
# Wired network setup
#   - interface: name of device (required)
#   - address: IP address (leave blank for DHCP)
#   - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
#   - broadcast: broadcast address (ignored for DHCP) (optional)
#   - gateway: default route (ignored for DHCP)
# 
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
#
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=wlan0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
#   - set to 'menu' to present a menu during boot-up (dialog package required)
#   - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network.d
#
# This requires the netcfg package
#
#NETWORKS=(wpa_suppl)
# -----------------------------------------------------------------------
# DAEMONS
# -----------------------------------------------------------------------
#
# Daemons to start at boot-up (in this order)
#   - prefix a daemon with a ! to disable it
#   - prefix a daemon with a @ to start it up in the background
#
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
#
DAEMONS=(hwclock syslog-ng dbus @network netfs crond anacrond @net-profiles @notify-osd  @xfce4-volumed)

$ wget -S --spider http://mirror.yandex.ru/archlinux/extra/os/i686/extra.db
Включен режим робота. Проверка существования удалённого файла.
--2012-05-20 00:06:58--  http://mirror.yandex.ru/archlinux/extra/os/i686/extra.db
Распознаётся mirror.yandex.ru... 213.180.204.183, 2a02:6b8:0:201::1
Подключение к mirror.yandex.ru|213.180.204.183|:80... соединение установлено.
HTTP-запрос отправлен. Ожидание ответа... 
  HTTP/1.0 200 OK
  Server: nginx/1.1.8
  Date: Sat, 19 May 2012 19:59:43 GMT
  Content-Type: application/octet-stream
  Content-Length: 1429435
  Last-Modified: Sat, 19 May 2012 08:44:14 GMT
  Accept-Ranges: bytes
  Age: 436
  X-Cache: HIT from alabin.yandex.net
  X-Cache-Lookup: HIT from alabin.yandex.net:3128
  Via: 1.1 alabin.yandex.net:3128 (squid/2.7.STABLE9)
  Connection: keep-alive
Длина: 1429435 (1,4M) [application/octet-stream]
Удалённый файл существует.

 core не устарел
ошибка: не удалось получить файл 'extra.db' из mirror.yandex.ru : Given file does not exist
ошибка: не удалось получить файл 'extra.db' из mirror.yandex.ru : The requested URL returned error: 404
ошибка: не удалось обновить extra (ошибка в библиотеке загрузки)
 community не устарел
 archlinuxfr не устарел

$ wget http://mirror.yandex.ru/archlinux/extra/os/i686/dhcp-4.2.3.2-2-i686.pkg.tar.xz
--2012-05-19 16:35:50--  http://mirror.yandex.ru/archlinux/extra/os/i686/dhcp-4.2.3.2-2-i686.pkg.tar.xz
Распознаётся mirror.yandex.ru... 213.180.204.183, 2a02:6b8:0:201::1
Подключение к mirror.yandex.ru|213.180.204.183|:80... соединение установлено.
HTTP-запрос отправлен. Ожидание ответа... 200 OK
Длина: 964908 (942K) [application/octet-stream]
Сохранение в каталог: ««dhcp-4.2.3.2-2-i686.pkg.tar.xz»».
100%[==============================================================================>] 964 908     2,79M/s   за 0,3s    
2012-05-19 16:35:50 (2,79 MB/s) - «dhcp-4.2.3.2-2-i686.pkg.tar.xz» saved [964908/964908]