вот такие проблемы в libreoffice и pidgin.
Куда рыть? Что делать?
В общем, форматирование с флагов -с не помогло.
whdd также ситуацию не спас. готовлюсь к походу за новым жестким и ибп.
uname -a
Linux localhost 3.8.5-1-ARCH #1 SMP PREEMPT Fri Mar 29 19:18:14 CET 2013 x86_64 GNU/Linux
dmesg
dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.5-1-ARCH ([email protected]) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Fri Mar 29 19:18:14 CET 2013
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9317ea57-600d-4dcd-9a62-16ee102ae1c8 ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf67ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf680000-0x00000000bf68dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bf68e000-0x00000000bf6dffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bf6e0000-0x00000000bf6fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer P5K-V/P5K-V, BIOS 1002    06/18/2008
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0xbf680 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BF700000 mask FFFF00000 uncachable
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0xbf67ffff]
[    0.000000]  [mem 0x00000000-0xbf5fffff] page 2M
[    0.000000]  [mem 0xbf600000-0xbf67ffff] page 4k
[    0.000000] kernel direct mapping tables up to 0xbf67ffff @ [mem 0x1fffb000-0x1fffffff]
[    0.000000] RAMDISK: [mem 0x37a26000-0x37d0afff]
[    0.000000] ACPI: RSDP 00000000000fbc20 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000bf680000 00040 (v01 A_M_I_ OEMRSDT  06000818 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000bf680200 00084 (v02 A_M_I_ OEMFACP  06000818 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000bf680440 0994A (v01  A0752 A0752067 00000067 INTL 20060113)
[    0.000000] ACPI: FACS 00000000bf68e000 00040
[    0.000000] ACPI: APIC 00000000bf680390 0006C (v01 A_M_I_ OEMAPIC  06000818 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000bf680400 0003C (v01 A_M_I_ OEMMCFG  06000818 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000bf68e040 00081 (v01 A_M_I_ AMI_OEM  06000818 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000bf689d90 00038 (v01 A_M_I_ OEMHPET  06000818 MSFT 00000097)
[    0.000000] ACPI: GSCI 00000000bf68e0d0 02024 (v01 A_M_I_ GMCHSCI  06000818 MSFT 00000097)
[    0.000000] ACPI: OSFR 00000000bf689dd0 000B0 (v01 A_M_I_ OEMOSFR  06000818 MSFT 00000097)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000bf67ffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0xbf67ffff]
[    0.000000]   NODE_DATA [mem 0xbf67b000-0xbf67ffff]
[    0.000000]  [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bbe00000-ffff8800bedfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xbf67ffff]
[    0.000000] On node 0 totalpages: 783887
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12186 pages used for memmap
[    0.000000]   DMA32 zone: 767718 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[    0.000000] e820: [mem 0xbf700000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bf400000 s85056 r8192 d21440 u524288
[    0.000000] pcpu-alloc: s85056 r8192 d21440 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 771631
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9317ea57-600d-4dcd-9a62-16ee102ae1c8 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3071524k/3136000k available (4986k kernel code, 452k absent, 64024k reserved, 3945k data, 820k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 12582912 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2409.024 MHz processor
[    0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 4819.80 BogoMIPS (lpj=8030080)
[    0.003341] pid_max: default: 32768 minimum: 301
[    0.003381] Security Framework initialized
[    0.003395] AppArmor: AppArmor disabled by boot time parameter
[    0.006891] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.009922] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.011395] Mount-cache hash table entries: 256
[    0.011668] Initializing cgroup subsys cpuacct
[    0.011672] Initializing cgroup subsys memory
[    0.011685] Initializing cgroup subsys devices
[    0.011686] Initializing cgroup subsys freezer
[    0.011688] Initializing cgroup subsys net_cls
[    0.011690] Initializing cgroup subsys blkio
[    0.011723] CPU: Physical Processor ID: 0
[    0.011725] CPU: Processor Core ID: 0
[    0.011727] mce: CPU supports 6 MCE banks
[    0.011735] CPU0: Thermal monitoring enabled (TM2)
[    0.011740] process: using mwait in idle threads
[    0.011745] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[    0.011852] Freeing SMP alternatives: 20k freed
[    0.013077] ACPI: Core revision 20121018
[    0.016676] ftrace: allocating 19370 entries in 76 pages
[    0.023815] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058551] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     E4600  @ 2.40GHz (fam: 06, model: 0f, stepping: 0d)
[    0.059999] APIC calibration not consistent with PM-Timer: 116ms instead of 100ms
[    0.059999] APIC delta adjusted to PM-Timer: 1254703 (1463817)
[    0.059999] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.059999] perf_event_intel: PEBS disabled due to CPU errata
[    0.059999] ... version:                2
[    0.059999] ... bit width:              40
[    0.059999] ... generic registers:      2
[    0.059999] ... value mask:             000000ffffffffff
[    0.059999] ... max period:             000000007fffffff
[    0.059999] ... fixed-purpose events:   3
[    0.059999] ... event mask:             0000000700000003
[    0.096646] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.083417] smpboot: Booting Node   0, Processors  #1
[    0.096661] Brought up 2 CPUs
[    0.096663] smpboot: Total of 2 processors activated (9639.60 BogoMIPS)
[    0.097843] devtmpfs: initialized
[    0.097843] PM: Registering ACPI NVS region [mem 0xbf68e000-0xbf6dffff] (335872 bytes)
[    0.097843] RTC time: 11:46:42, date: 04/08/13
[    0.097843] NET: Registered protocol family 16
[    0.097843] ACPI: bus type pci registered
[    0.097843] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.097843] PCI: not using MMCONFIG
[    0.097843] PCI: Using configuration type 1 for base access
[    0.097843] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.097843] mtrr: probably your BIOS does not setup all CPUs.
[    0.097843] mtrr: corrected configuration.
[    0.100023] bio: create slab <bio-0> at 0
[    0.100046] ACPI: Added _OSI(Module Device)
[    0.100046] ACPI: Added _OSI(Processor Device)
[    0.100046] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.100046] ACPI: Added _OSI(Processor Aggregator Device)
[    0.101235] ACPI: EC: Look up EC in DSDT
[    0.103561] ACPI: Executed 1 blocks of module-level executable AML code
[    0.107968] ACPI: SSDT 00000000bf690100 00256 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.108259] ACPI: Dynamic OEM Table Load:
[    0.108262] ACPI: SSDT           (null) 00256 (v01    AMI   CPU1PM 00000001 INTL 20060113)
[    0.108398] ACPI: SSDT 00000000bf690360 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.108686] ACPI: Dynamic OEM Table Load:
[    0.108688] ACPI: SSDT           (null) 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
[    0.108831] ACPI: Interpreter enabled
[    0.108836] ACPI: (supports S0 S1 S3 S4 S5)
[    0.108852] ACPI: Using IOAPIC for interrupt routing
[    0.108872] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.109281] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.131793] ACPI: No dock devices found.
[    0.131799] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.131856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.131859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.131925] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.131928] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.132047] PCI host bridge to bus 0000:00
[    0.132051] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.132053] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.132056] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.132058] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.132060] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.132062] pci_bus 0000:00: root bus resource [mem 0xbf700000-0xffffffff]
[    0.132073] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.132120] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[    0.132131] pci 0000:00:02.0: reg 10: [mem 0xfe800000-0xfe87ffff]
[    0.132137] pci 0000:00:02.0: reg 14: [io  0xcc00-0xcc07]
[    0.132143] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.132148] pci 0000:00:02.0: reg 1c: [mem 0xfe700000-0xfe7fffff]
[    0.132187] pci 0000:00:02.1: [8086:29c3] type 00 class 0x038000
[    0.132196] pci 0000:00:02.1: reg 10: [mem 0xfe880000-0xfe8fffff]
[    0.132271] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.132313] pci 0000:00:1a.0: reg 20: [io  0xc480-0xc49f]
[    0.132366] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.132407] pci 0000:00:1a.1: reg 20: [io  0xc800-0xc81f]
[    0.132458] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.132499] pci 0000:00:1a.2: reg 20: [io  0xc880-0xc89f]
[    0.132559] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.132580] pci 0000:00:1a.7: reg 10: [mem 0xfe6fbc00-0xfe6fbfff]
[    0.132668] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.132695] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.132710] pci 0000:00:1b.0: reg 10: [mem 0xfe6f4000-0xfe6f7fff 64bit]
[    0.132775] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.132798] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.132865] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.132891] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.132960] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.132984] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.133050] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.133077] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.133118] pci 0000:00:1d.0: reg 20: [io  0xc000-0xc01f]
[    0.133170] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.133211] pci 0000:00:1d.1: reg 20: [io  0xc080-0xc09f]
[    0.133262] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.133304] pci 0000:00:1d.2: reg 20: [io  0xc400-0xc41f]
[    0.133368] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.133389] pci 0000:00:1d.7: reg 10: [mem 0xfe6fb800-0xfe6fbbff]
[    0.133476] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.133498] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.133560] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.133639] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.133686] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[    0.133701] pci 0000:00:1f.2: reg 10: [io  0xac00-0xac07]
[    0.133709] pci 0000:00:1f.2: reg 14: [io  0xa880-0xa883]
[    0.133717] pci 0000:00:1f.2: reg 18: [io  0xa800-0xa807]
[    0.133725] pci 0000:00:1f.2: reg 1c: [io  0xa480-0xa483]
[    0.133733] pci 0000:00:1f.2: reg 20: [io  0xa400-0xa40f]
[    0.133741] pci 0000:00:1f.2: reg 24: [io  0xa080-0xa08f]
[    0.133787] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.133802] pci 0000:00:1f.3: reg 10: [mem 0xfe6fb400-0xfe6fb4ff 64bit]
[    0.133822] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.133858] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.133873] pci 0000:00:1f.5: reg 10: [io  0xbc00-0xbc07]
[    0.133881] pci 0000:00:1f.5: reg 14: [io  0xb880-0xb883]
[    0.133889] pci 0000:00:1f.5: reg 18: [io  0xb800-0xb807]
[    0.133897] pci 0000:00:1f.5: reg 1c: [io  0xb480-0xb483]
[    0.133905] pci 0000:00:1f.5: reg 20: [io  0xb400-0xb40f]
[    0.133913] pci 0000:00:1f.5: reg 24: [io  0xb080-0xb08f]
[    0.133991] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.134001] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.134056] pci 0000:02:00.0: [197b:2363] type 00 class 0x010185
[    0.134143] pci 0000:02:00.0: reg 24: [mem 0xfeafe000-0xfeafffff]
[    0.134157] pci 0000:02:00.0: reg 30: [mem 0xfeae0000-0xfeaeffff pref]
[    0.134208] pci 0000:02:00.0: PME# supported from D3hot
[    0.134240] pci 0000:02:00.1: [197b:2363] type 00 class 0x010185
[    0.134264] pci 0000:02:00.1: reg 10: [io  0xdc00-0xdc07]
[    0.134278] pci 0000:02:00.1: reg 14: [io  0xd880-0xd883]
[    0.134292] pci 0000:02:00.1: reg 18: [io  0xd800-0xd807]
[    0.134306] pci 0000:02:00.1: reg 1c: [io  0xd480-0xd483]
[    0.134319] pci 0000:02:00.1: reg 20: [io  0xd400-0xd40f]
[    0.134409] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.134413] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.134417] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.134477] pci 0000:01:00.0: [1969:1048] type 00 class 0x020000
[    0.134499] pci 0000:01:00.0: reg 10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[    0.134551] pci 0000:01:00.0: reg 30: [mem 0xfe9a0000-0xfe9bffff pref]
[    0.134606] pci 0000:01:00.0: PME# supported from D3hot D3cold
[    0.140023] pci 0000:00:1c.5: PCI bridge to [bus 01]
[    0.140037] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.140072] pci 0000:04:00.0: [10ec:8139] type 00 class 0x020000
[    0.140089] pci 0000:04:00.0: reg 10: [io  0xe800-0xe8ff]
[    0.140099] pci 0000:04:00.0: reg 14: [mem 0xfebffc00-0xfebffcff]
[    0.140141] pci 0000:04:00.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
[    0.140169] pci 0000:04:00.0: supports D1 D2
[    0.140171] pci 0000:04:00.0: PME# supported from D1 D2 D3hot
[    0.140191] pci 0000:04:02.0: [1106:3038] type 00 class 0x0c0300
[    0.140238] pci 0000:04:02.0: reg 20: [io  0xe480-0xe49f]
[    0.140280] pci 0000:04:02.0: supports D1 D2
[    0.140282] pci 0000:04:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140302] pci 0000:04:02.1: [1106:3038] type 00 class 0x0c0300
[    0.140349] pci 0000:04:02.1: reg 20: [io  0xec00-0xec1f]
[    0.140391] pci 0000:04:02.1: supports D1 D2
[    0.140393] pci 0000:04:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140413] pci 0000:04:02.2: [1106:3104] type 00 class 0x0c0320
[    0.140429] pci 0000:04:02.2: reg 10: [mem 0xfebff800-0xfebff8ff]
[    0.140502] pci 0000:04:02.2: supports D1 D2
[    0.140504] pci 0000:04:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.140531] pci 0000:04:03.0: [1106:3044] type 00 class 0x0c0010
[    0.140549] pci 0000:04:03.0: reg 10: [mem 0xfebff000-0xfebff7ff]
[    0.140559] pci 0000:04:03.0: reg 14: [io  0xe400-0xe47f]
[    0.140627] pci 0000:04:03.0: supports D2
[    0.140629] pci 0000:04:03.0: PME# supported from D2 D3hot D3cold
[    0.140673] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.140677] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.140681] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.140686] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.140689] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.140691] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.140693] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.140695] pci 0000:00:1e.0:   bridge window [mem 0xbf700000-0xffffffff] (subtractive decode)
[    0.140721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.140791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[    0.140825] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[    0.140869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.140892] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.142207] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.142251] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.142292] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.142333] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.142373] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.142414] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.142455] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.142495] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.142568] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.142568] vgaarb: loaded
[    0.142568] vgaarb: bridge control possible 0000:00:02.0
[    0.142568] PCI: Using ACPI for IRQ routing
[    0.148526] PCI: pci_cache_line_size set to 64 bytes
[    0.148610] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.148612] e820: reserve RAM buffer [mem 0xbf680000-0xbfffffff]
[    0.148730] NetLabel: Initializing
[    0.148732] NetLabel:  domain hash size = 128
[    0.148733] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.148747] NetLabel:  unlabeled traffic allowed by default
[    0.148761] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.148766] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.148770] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.163354] Switching to clocksource hpet
[    0.170127] pnp: PnP ACPI init
[    0.170149] ACPI: bus type pnp registered
[    0.170265] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.170270] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.170320] pnp 00:01: [dma 4]
[    0.170346] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.170390] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.170422] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.170452] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.170698] pnp 00:05: [dma 2]
[    0.170750] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.170810] system 00:06: [io  0x0290-0x0297] has been reserved
[    0.170814] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.170974] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.170977] system 00:07: [io  0x0800-0x087f] has been reserved
[    0.170979] system 00:07: [io  0x0480-0x04bf] has been reserved
[    0.170982] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.170985] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.170988] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.170990] system 00:07: [mem 0xffa00000-0xffafffff] has been reserved
[    0.170993] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.170995] system 00:07: [mem 0xffe00000-0xffefffff] has been reserved
[    0.170998] system 00:07: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.171001] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171085] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.171282] pnp 00:09: [dma 0 disabled]
[    0.171348] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.171423] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.171426] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.171429] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171484] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.171547] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[    0.171551] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171743] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.171747] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.171749] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.171752] system 00:0d: [mem 0x00100000-0xbf6fffff] could not be reserved
[    0.171755] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.171864] pnp: PnP ACPI: found 14 devices
[    0.171866] ACPI: ACPI bus type pnp unregistered
[    0.178549] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.178554] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000
[    0.178563] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.178571] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.178574] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.178587] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[    0.178590] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.178592] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.178595] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.178597] pci 0000:00:1c.5: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.178602] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbf700000-0xbfafffff]
[    0.178606] pci 0000:00:1c.4: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref]
[    0.178609] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbfd00000-0xbfefffff 64bit pref]
[    0.178612] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.178615] pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
[    0.178618] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.178621] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.178626] pci 0000:00:1c.0:   bridge window [mem 0xbf700000-0xbfafffff]
[    0.178630] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.178636] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.178639] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.178644] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.178648] pci 0000:00:1c.4:   bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref]
[    0.178654] pci 0000:00:1c.5: PCI bridge to [bus 01]
[    0.178656] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.178661] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.178665] pci 0000:00:1c.5:   bridge window [mem 0xbfd00000-0xbfefffff 64bit pref]
[    0.178671] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.178674] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.178679] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.178690] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.178709] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[    0.178721] pci 0000:00:1e.0: setting latency timer to 64
[    0.178726] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.178728] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.178730] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.178732] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.178735] pci_bus 0000:00: resource 8 [mem 0xbf700000-0xffffffff]
[    0.178737] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.178739] pci_bus 0000:03: resource 1 [mem 0xbf700000-0xbfafffff]
[    0.178742] pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.178744] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.178746] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.178748] pci_bus 0000:02: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref]
[    0.178751] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.178753] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.178755] pci_bus 0000:01: resource 2 [mem 0xbfd00000-0xbfefffff 64bit pref]
[    0.178758] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
[    0.178760] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.178762] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    0.178764] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    0.178766] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    0.178769] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[    0.178771] pci_bus 0000:04: resource 8 [mem 0xbf700000-0xffffffff]
[    0.178811] NET: Registered protocol family 2
[    0.179004] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.179337] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.179602] TCP: Hash tables configured (established 32768 bind 32768)
[    0.179658] TCP: reno registered
[    0.179667] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.179702] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.179793] NET: Registered protocol family 1
[    0.179810] pci 0000:00:02.0: Boot video device
[    0.180040] pci 0000:04:02.0: HCRESET not completed yet!
[    0.180061] pci 0000:04:02.1: HCRESET not completed yet!
[    0.180085] PCI: CLS 32 bytes, default 64
[    0.180138] Unpacking initramfs...
[    0.239225] Freeing initrd memory: 2964k freed
[    0.240905] audit: initializing netlink socket (disabled)
[    0.240927] type=2000 audit(1365421602.239:1): initialized
[    0.252259] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.254051] VFS: Disk quotas dquot_6.5.2
[    0.254100] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.254299] msgmni has been set to 6004
[    0.254523] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.254552] io scheduler noop registered
[    0.254554] io scheduler deadline registered
[    0.254560] io scheduler cfq registered (default)
[    0.254707] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.254797] pcieport 0000:00:1c.4: irq 41 for MSI/MSI-X
[    0.254888] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[    0.255013] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.255015] vesafb: scrolling: redraw
[    0.255018] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.255251] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010800000, using 3072k, total 3072k
[    0.286918] Console: switching to colour frame buffer device 128x48
[    0.318473] fb0: VESA VGA frame buffer device
[    0.318486] intel_idle: does not run on family 6 model 15
[    0.318521] GHES: HEST is not enabled!
[    0.318579] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.339108] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.339501] Linux agpgart interface v0.103
[    0.339576] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.339578] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.340083] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.340193] mousedev: PS/2 mouse device common for all mice
[    0.340258] rtc_cmos 00:02: RTC can wake from S4
[    0.340369] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.340393] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.340402] cpuidle: using governor ladder
[    0.340404] cpuidle: using governor menu
[    0.340406] EFI Variables Facility v0.08 2004-May-17
[    0.340460] drop_monitor: Initializing network drop monitor service
[    0.340535] TCP: cubic registered
[    0.340641] NET: Registered protocol family 10
[    0.340804] NET: Registered protocol family 17
[    0.340814] Key type dns_resolver registered
[    0.341011] PM: Hibernation image not present or could not be loaded.
[    0.341029] registered taskstats version 1
[    0.341641]   Magic number: 9:987:781
[    0.341729] rtc_cmos 00:02: setting system clock to 2013-04-08 11:46:42 UTC (1365421602)
[    0.343155] Freeing unused kernel memory: 820k freed
[    0.343441] Write protecting the kernel read-only data: 8192k
[    0.346465] Freeing unused kernel memory: 1148k freed
[    0.347998] Freeing unused kernel memory: 440k freed
[    0.355520] systemd-udevd[45]: starting version 198
[    0.382235] Floppy drive(s): fd0 is 1.44M
[    0.388703] ACPI: bus type usb registered
[    0.388732] usbcore: registered new interface driver usbfs
[    0.388743] usbcore: registered new interface driver hub
[    0.388944] usbcore: registered new device driver usb
[    0.389341] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.389589] uhci_hcd: USB Universal Host Controller Interface driver
[    0.389628] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.389632] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.389638] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.389679] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c480
[    0.390435] ehci-pci: EHCI PCI platform driver
[    0.390598] hub 1-0:1.0: USB hub found
[    0.390604] hub 1-0:1.0: 2 ports detected
[    0.390727] ehci-pci 0000:00:1a.7: setting latency timer to 64
[    0.390730] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.390738] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 2
[    0.390751] ehci-pci 0000:00:1a.7: debug port 1
[    0.396378] SCSI subsystem initialized
[    0.397495] FDC 0 is a post-1991 82077
[    0.398066] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.398092] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe6fbc00
[    0.398703] ACPI: bus type scsi registered
[    0.401021] libata version 3.00 loaded.
[    0.402347] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001)
[    0.402402] pata_jmicron 0000:02:00.1: setting latency timer to 64
[    0.404101] scsi0 : pata_jmicron
[    0.404927] scsi1 : pata_jmicron
[    0.405125] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[    0.405128] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[    0.405185] ahci 0000:02:00.0: version 3.0
[    0.406715] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.406973] hub 2-0:1.0: USB hub found
[    0.406978] hub 2-0:1.0: 6 ports detected
[    0.407196] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.407200] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.407206] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    0.407244] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
[    0.407376] hub 3-0:1.0: USB hub found
[    0.407381] hub 3-0:1.0: 2 ports detected
[    0.407468] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.407471] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.407477] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
[    0.407499] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000c880
[    0.407627] hub 4-0:1.0: USB hub found
[    0.407633] hub 4-0:1.0: 2 ports detected
[    0.407718] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.407721] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.407727] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.407757] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c000
[    0.407875] hub 5-0:1.0: USB hub found
[    0.407879] hub 5-0:1.0: 2 ports detected
[    0.407964] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.407967] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.407973] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.408002] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
[    0.408120] hub 6-0:1.0: USB hub found
[    0.408126] hub 6-0:1.0: 2 ports detected
[    0.408211] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.408214] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.408220] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.408243] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c400
[    0.408402] hub 7-0:1.0: USB hub found
[    0.408407] hub 7-0:1.0: 2 ports detected
[    0.408515] ata_piix 0000:00:1f.2: version 2.13
[    0.408535] ata_piix 0000:00:1f.2: MAP [
[    0.408537]  P0 -- P1 -- ]
[    0.408571] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.410505] scsi2 : ata_piix
[    0.411314] scsi3 : ata_piix
[    0.411738] ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 22
[    0.411742] ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 22
[    0.411798] ata_piix 0000:00:1f.5: MAP [
[    0.411800]  P0 -- P1 -- ]
[    0.411839] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.412059] scsi4 : ata_piix
[    0.412765] scsi5 : ata_piix
[    0.413158] ata5: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 22
[    0.413161] ata6: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 22
[    0.413223] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.413227] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.413235] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    0.413249] ehci-pci 0000:00:1d.7: debug port 1
[    0.416740] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.416744] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[    0.417154] scsi6 : ahci
[    0.417237] scsi7 : ahci
[    0.417290] ata7: SATA max UDMA/133 abar [email protected] port 0xfeafe100 irq 16
[    0.417294] ata8: SATA max UDMA/133 abar [email protected] port 0xfeafe180 irq 16
[    0.417458] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.417467] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe6fb800
[    0.426708] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.426964] hub 8-0:1.0: USB hub found
[    0.426969] hub 8-0:1.0: 6 ports detected
[    0.460108] firewire_ohci 0000:04:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    0.460208] uhci_hcd 0000:04:02.0: UHCI Host Controller
[    0.460217] uhci_hcd 0000:04:02.0: new USB bus registered, assigned bus number 9
[    0.460235] uhci_hcd 0000:04:02.0: HCRESET not completed yet!
[    0.460247] uhci_hcd 0000:04:02.0: irq 18, io base 0x0000e480
[    0.461014] hub 9-0:1.0: USB hub found
[    0.461020] hub 9-0:1.0: 2 ports detected
[    0.461230] uhci_hcd 0000:04:02.1: UHCI Host Controller
[    0.461237] uhci_hcd 0000:04:02.1: new USB bus registered, assigned bus number 10
[    0.461256] uhci_hcd 0000:04:02.1: HCRESET not completed yet!
[    0.461267] uhci_hcd 0000:04:02.1: irq 19, io base 0x0000ec00
[    0.461403] hub 10-0:1.0: USB hub found
[    0.461408] hub 10-0:1.0: 2 ports detected
[    0.461815] ehci-pci 0000:04:02.2: EHCI Host Controller
[    0.461822] ehci-pci 0000:04:02.2: new USB bus registered, assigned bus number 11
[    0.461861] ehci-pci 0000:04:02.2: irq 16, io mem 0xfebff800
[    0.470035] ehci-pci 0000:04:02.2: USB 2.0 started, EHCI 1.00
[    0.470245] hub 11-0:1.0: USB hub found
[    0.470251] hub 11-0:1.0: 4 ports detected
[    0.730188] ata8: SATA link down (SStatus 0 SControl 300)
[    0.740736] ata7: SATA link down (SStatus 0 SControl 300)
[    0.740759] ata5: SATA link down (SStatus 0 SControl 300)
[    0.751456] ata6: SATA link down (SStatus 0 SControl 300)
[    0.773362] usb 2-5: new high-speed USB device number 3 using ehci-pci
[    0.883410] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.883528] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.890291] ata4.00: ATAPI: Optiarc DVD RW AD-5200S, 1.05, max UDMA/100
[    0.890370] ata3.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[    0.890373] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.896972] ata3.00: configured for UDMA/133
[    0.897096] scsi 2:0:0:0: Direct-Access     ATA      WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[    0.903503] ata4.00: configured for UDMA/100
[    0.907020] scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-5200S  1.05 PQ: 0 ANSI: 5
[    0.910761] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    0.910811] sd 2:0:0:0: [sda] Write Protect is off
[    0.910814] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.910834] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.913864] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    0.913870] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.914142] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    0.930262]  sda: sda1 sda2 sda3 sda4
[    0.930778] sd 2:0:0:0: [sda] Attached SCSI disk
[    0.960182] firewire_core 0000:04:03.0: created device fw0: GUID 001e8c000001f8de, S400
[    1.230038] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    1.243364] tsc: Refined TSC clocksource calibration: 2409.033 MHz
[    1.243372] Switching to clocksource tsc
[    1.448407] usbcore: registered new interface driver usbhid
[    1.448412] usbhid: USB HID core driver
[    1.449076] input: Genius 2.4G Wireless Mouse and Keyboard as /devices/pci0000:00/0000:00:1a.1/usb3/3-1/3-1:1.0/input/input0
[    1.449218] hid-generic 0003:0458:00AE.0001: input,hidraw0: USB HID v1.00 Keyboard [Genius 2.4G Wireless Mouse and Keyboard] on usb-0000:00:1a.1-1/input0
[    1.449944] input: Genius 2.4G Wireless Mouse and Keyboard as /devices/pci0000:00/0000:00:1a.1/usb3/3-1/3-1:1.1/input/input1
[    1.450107] hid-generic 0003:0458:00AE.0002: input,hidraw1: USB HID v1.00 Mouse [Genius 2.4G Wireless Mouse and Keyboard] on usb-0000:00:1a.1-1/input1
[    1.630040] usb 4-2: new full-speed USB device number 2 using uhci_hcd
[    1.803116] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.2/usb4/4-2/4-2:1.0/input/input2
[    1.803230] hid-generic 0003:09DA:054F.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1a.2-2/input0
[    1.804888] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1a.2/usb4/4-2/4-2:1.1/input/input3
[    1.804972] hid-generic 0003:09DA:054F.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1a.2-2/input1
[    2.859255] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
[    2.860837] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    3.854667] systemd[1]: systemd 200 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    3.868591] systemd[1]: Set hostname to <localhost>.
[    4.266100] systemd[1]: Starting Collect Read-Ahead Data...
[    4.270350] systemd[1]: Starting Replay Read-Ahead Data...
[    4.276873] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    4.276948] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.276969] systemd[1]: Starting Syslog Socket.
[    4.277017] systemd[1]: Listening on Syslog Socket.
[    4.277032] systemd[1]: Starting Remote File Systems.
[    4.277049] systemd[1]: Reached target Remote File Systems.
[    4.277063] systemd[1]: Starting Delayed Shutdown Socket.
[    4.277086] systemd[1]: Listening on Delayed Shutdown Socket.
[    4.277097] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    4.277123] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.277134] systemd[1]: Starting LVM2 metadata daemon socket.
[    4.277162] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.277171] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    4.277202] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.277219] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    4.277260] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.277271] systemd[1]: Starting Paths.
[    4.277281] systemd[1]: Reached target Paths.
[    4.277351] systemd[1]: Starting udev Kernel Socket.
[    4.277377] systemd[1]: Listening on udev Kernel Socket.
[    4.277428] systemd[1]: Starting udev Control Socket.
[    4.277454] systemd[1]: Listening on udev Control Socket.
[    4.277472] systemd[1]: Starting Journal Socket.
[    4.277513] systemd[1]: Listening on Journal Socket.
[    4.277540] systemd[1]: Mounting Huge Pages File System...
[    4.279377] systemd-readahead[121]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[    4.290394] systemd[1]: Starting udev Coldplug all Devices...
[    4.296916] systemd[1]: Mounting POSIX Message Queue File System...
[    4.306993] systemd[1]: Starting udev Kernel Device Manager...
[    4.313576] systemd[1]: Starting Journal Service...
[    4.320275] systemd[1]: Started Journal Service.
[    4.320329] systemd[1]: Mounting Debug File System...
[    4.330341] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    4.330469] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.330488] systemd[1]: Starting Encrypted Volumes.
[    4.330500] systemd[1]: Reached target Encrypted Volumes.
[    4.330521] systemd[1]: Expecting device dev-disk-by\x2duuid-4194b7e1\x2d3fe9\x2d4cbb\x2da034\x2d226060773b24.device...
[    4.330542] systemd[1]: Expecting device dev-disk-by\x2duuid-bd04412a\x2d9fe6\x2d4b5d\x2db95f\x2d407ad25eb9f1.device...
[    4.330559] systemd[1]: Expecting device dev-disk-by\x2duuid-ed8547f0\x2dbada\x2d4f0d\x2d9730\x2d0fd37df1c793.device...
[    6.063198] EXT4-fs (sda3): re-mounted. Opts: (null)
[    7.228916] systemd-udevd[125]: starting version 200
[    7.395785] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[    7.395795] ACPI: Power Button [PWRB]
[    7.395865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    7.395868] ACPI: Power Button [PWRF]
[    7.660299] ACPI: Requesting acpi_cpufreq
[    7.705053] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[    7.705122] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    7.705545] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    7.705705] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    7.776771] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    7.776800] 8139cp 0000:04:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    7.777943] 8139too: 8139too Fast Ethernet driver 0.9.28
[    7.778414] 8139too 0000:04:00.0 eth0: RealTek RTL8139 at 0xffffc90000664c00, 4c:00:10:61:0d:23, IRQ 16
[    7.849420] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    7.863159] ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20121018/utaddress-251)
[    7.863168] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.863674] iTCO_vendor_support: vendor-support=0
[    7.864153] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[    7.864186] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[    7.864421] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.881928] gpio_ich: GPIO from 195 to 255 on gpio_ich
[    8.064863] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
[    8.107584] atl1 0000:01:00.0: version 2.1.3
[    8.107636] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
[    8.108312] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    8.136908] coretemp coretemp.0: Using relative temperature scale!
[    8.136924] coretemp coretemp.0: Using relative temperature scale!
[    8.444632] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    8.660217] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[    8.675450] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    8.675609] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.675685] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.675755] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.675826] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    8.675895] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    8.675968] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    8.676038] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    8.952414] [drm] Initialized drm 1.1.0 20060810
[    9.378241] Adding 265068k swap on /dev/sda2.  Priority:-1 extents:1 across:265068k
[   23.076831] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[   23.076835] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[   23.076855] Console: switching to colour dummy device 80x25
[   23.076975] i915 0000:00:02.0: setting latency timer to 64
[   23.096005] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[   23.096015] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   23.096016] [drm] Driver supports precise vblank timestamp query.
[   23.096052] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   23.097760] [drm] initialized overlay support
[   23.238386] fbcon: inteldrmfb (fb0) is primary device
[   23.317268] Console: switching to colour frame buffer device 210x65
[   23.322911] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   23.322913] i915 0000:00:02.0: registered panic notifier
[   23.322925] i915: No ACPI video bus found
[   23.323277] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[  292.919731] usb 2-5: USB disconnect, device number 3
[  389.534385] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  389.534453] ata3.00: BMDMA stat 0x25
[  389.534483] ata3.00: failed command: READ DMA EXT
[  389.534522] ata3.00: cmd 25/00:40:3b:de:61/00:00:a9:00:00/e0 tag 0 dma 32768 in
         res 51/40:2f:40:de:61/40:00:a9:00:00/e0 Emask 0x9 (media error)
[  389.534623] ata3.00: status: { DRDY ERR }
[  389.534654] ata3.00: error: { UNC }
[  389.550274] ata3.00: configured for UDMA/133
[  389.550294] sd 2:0:0:0: [sda] Unhandled sense code
[  389.550299] sd 2:0:0:0: [sda]
[  389.550302] Result: hostbyte=0x00 driverbyte=0x08
[  389.550306] sd 2:0:0:0: [sda]
[  389.550308] Sense Key : 0x3 [current] [descriptor]
[  389.550314] Descriptor sense data with sense descriptors (in hex):
[  389.550317]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[  389.550332]         a9 61 de 40
[  389.550340] sd 2:0:0:0: [sda]
[  389.550348] ASC=0x11 ASCQ=0x4
[  389.550352] sd 2:0:0:0: [sda] CDB:
[  389.550354] cdb[0]=0x28: 28 00 a9 61 de 3b 00 00 40 00
[  389.550364] end_request: I/O error, dev sda, sector 2841763392
[  389.550410] Buffer I/O error on device sda4, logical block 1412825098
[  389.550456] Buffer I/O error on device sda4, logical block 1412825099
[  389.550506] Buffer I/O error on device sda4, logical block 1412825100
[  389.550553] Buffer I/O error on device sda4, logical block 1412825101
[  389.550598] Buffer I/O error on device sda4, logical block 1412825102
[  389.550644] Buffer I/O error on device sda4, logical block 1412825103
[  389.550689] Buffer I/O error on device sda4, logical block 1412825104
[  389.550734] Buffer I/O error on device sda4, logical block 1412825105
[  389.550779] Buffer I/O error on device sda4, logical block 1412825106
[  389.550824] Buffer I/O error on device sda4, logical block 1412825107
[  389.550896] ata3: EH complete
[  392.427171] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  392.427237] ata3.00: BMDMA stat 0x24
[  392.427267] ata3.00: failed command: READ DMA EXT
[  392.427307] ata3.00: cmd 25/00:04:3f:de:61/00:00:a9:00:00/e0 tag 0 dma 2048 in
         res 51/40:00:40:de:61/40:00:a9:00:00/e0 Emask 0x9 (media error)
[  392.427405] ata3.00: status: { DRDY ERR }
[  392.427435] ata3.00: error: { UNC }
[  392.441064] ata3.00: configured for UDMA/133
[  392.441077] sd 2:0:0:0: [sda] Unhandled sense code
[  392.441082] sd 2:0:0:0: [sda]
[  392.441085] Result: hostbyte=0x00 driverbyte=0x08
[  392.441089] sd 2:0:0:0: [sda]
[  392.441091] Sense Key : 0x3 [current] [descriptor]
[  392.441097] Descriptor sense data with sense descriptors (in hex):
[  392.441100]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[  392.441115]         a9 61 de 40
[  392.441128] sd 2:0:0:0: [sda]
[  392.441130] ASC=0x11 ASCQ=0x4
[  392.441133] sd 2:0:0:0: [sda] CDB:
[  392.441135] cdb[0]=0x28: 28 00 a9 61 de 3f 00 00 04 00
[  392.441145] end_request: I/O error, dev sda, sector 2841763392
[  392.441208] ata3: EH complete
[  395.318989] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  395.319056] ata3.00: BMDMA stat 0x24
[  395.319085] ata3.00: failed command: READ DMA EXT
[  395.319125] ata3.00: cmd 25/00:02:3f:de:61/00:00:a9:00:00/e0 tag 0 dma 1024 in
         res 51/40:00:40:de:61/40:00:a9:00:00/e0 Emask 0x9 (media error)
[  395.319223] ata3.00: status: { DRDY ERR }
[  395.319254] ata3.00: error: { UNC }
[  395.330883] ata3.00: configured for UDMA/133
[  395.330896] sd 2:0:0:0: [sda] Unhandled sense code
[  395.330900] sd 2:0:0:0: [sda]
[  395.330903] Result: hostbyte=0x00 driverbyte=0x08
[  395.330907] sd 2:0:0:0: [sda]
[  395.330910] Sense Key : 0x3 [current] [descriptor]
[  395.330915] Descriptor sense data with sense descriptors (in hex):
[  395.330918]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[  395.330933]         a9 61 de 40
[  395.330946] sd 2:0:0:0: [sda]
[  395.330948] ASC=0x11 ASCQ=0x4
[  395.330951] sd 2:0:0:0: [sda] CDB:
[  395.330953] cdb[0]=0x28: 28 00 a9 61 de 3f 00 00 02 00
[  395.330963] end_request: I/O error, dev sda, sector 2841763392
[  395.331007] quiet_error: 22 callbacks suppressed
[  395.331010] Buffer I/O error on device sda4, logical block 1412825098
[  395.331069] ata3: EH complete
[  398.198782] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[  398.198848] ata3.00: BMDMA stat 0x25
[  398.198878] ata3.00: failed command: READ DMA EXT
[  398.198917] ata3.00: cmd 25/00:02:41:de:61/00:00:a9:00:00/e0 tag 0 dma 1024 in
         res 51/40:02:41:de:61/40:00:a9:00:00/e0 Emask 0x9 (media error)
[  398.199016] ata3.00: status: { DRDY ERR }
[  398.199047] ata3.00: error: { UNC }
[  398.217687] ata3.00: configured for UDMA/133
[  398.217699] sd 2:0:0:0: [sda] Unhandled sense code
[  398.217703] sd 2:0:0:0: [sda]
[  398.217706] Result: hostbyte=0x00 driverbyte=0x08
[  398.217710] sd 2:0:0:0: [sda]
[  398.217712] Sense Key : 0x3 [current] [descriptor]
[  398.217718] Descriptor sense data with sense descriptors (in hex):
[  398.217720]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[  398.217736]         a9 61 de 41
[  398.217743] sd 2:0:0:0: [sda]
[  398.217751] ASC=0x11 ASCQ=0x4
[  398.217755] sd 2:0:0:0: [sda] CDB:
[  398.217756] cdb[0]=0x28: 28 00 a9 61 de 41 00 00 02 00
[  398.217766] end_request: I/O error, dev sda, sector 2841763393
[  398.217811] Buffer I/O error on device sda4, logical block 1412825099
[  398.217875] ata3: EH complete
[  398.217969] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  400.031085] systemd[1]: Starting Emergency Shell...
[  400.046849] systemd[1]: Started Emergency Shell.
[  400.046899] systemd[1]: Starting Emergency Mode.
[  400.046912] systemd[1]: Reached target Emergency Mode.
[  400.047478] systemd[1]: Stopping Syslog Socket.
[  400.047521] systemd[1]: Closed Syslog Socket.
[  400.047534] systemd[1]: Starting Journal Service...
[  400.051231] systemd-journald[126]: Received SIGTERM
[  400.060256] systemd[1]: Stopped udev Kernel Device Manager.
[  400.063441] systemd[1]: Stopped File System Check on /dev/disk/by-uuid/bd04412a-9fe6-4b5d-b95f-407ad25eb9f1.
[  400.066793] systemd[1]: Stopped File System Check on /dev/disk/by-uuid/ed8547f0-bada-4f0d-9730-0fd37df1c793.
[  400.066921] systemd[1]: Stopping Replay Read-Ahead Data...
[  400.067005] systemd[1]: Stopped Replay Read-Ahead Data.
[  400.067029] systemd[1]: Stopping Collect Read-Ahead Data...
[  400.067104] systemd[1]: Stopped Collect Read-Ahead Data.
[  400.067127] systemd[1]: Stopping udev Kernel Socket.
[  400.067174] systemd[1]: Closed udev Kernel Socket.
[  400.067183] systemd[1]: Stopping udev Control Socket.
[  400.067222] systemd[1]: Closed udev Control Socket.
[  400.086817] systemd[1]: Starting Journal Service...
[  400.093701] systemd[1]: Started Journal Service.
[  400.093783] systemd[1]: Startup finished in 3s 880ms 404us (kernel) + 6min 36s 213ms 316us (userspace) = 6min 40s 93ms 720us.
[  558.758075] EXT4-fs (sda4): mounting ext3 file system using the ext4 subsystem
[  558.923726] EXT4-fs (sda4): warning: mounting fs with errors, running e2fsck is recommended
[  558.978956] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[  564.829873] systemd-udevd[223]: starting version 200
[  566.291048] EXT4-fs (sda3): re-mounted. Opts: (null)
[  566.593762] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[  566.617982] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[  569.863367] zram: module is from the staging directory, the quality is unknown, you have been warned.
[  569.863663] zram: Creating 2 devices ...
[  569.917985] Adding 1538456k swap on /dev/zram0.  Priority:100 extents:1 across:1538456k SS
[  569.918354] Adding 1538456k swap on /dev/zram1.  Priority:100 extents:1 across:1538456k SS
[  570.039683] ip_tables: (C) 2000-2006 Netfilter Core Team
[  570.695945] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[  570.930221] 8139too 0000:04:00.0 eth0: link down
[  570.930255] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  613.867452] EXT4-fs (sda3): re-mounted. Opts: commit=0
[  616.247153] EXT4-fs (sda4): re-mounted. Opts: commit=0
[  793.833437] 8139too 0000:04:00.0 eth0: link down
[  793.833480] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  804.642004] 8139too 0000:04:00.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  818.518011] ehci-pci 0000:04:02.2: HC died; cleaning up
[  818.542035] uhci_hcd 0000:04:02.0: host system error, PCI problems?
[  818.542043] uhci_hcd 0000:04:02.0: host controller process error, something bad happened!
[  819.174042] uhci_hcd 0000:04:02.0: host system error, PCI problems?
[  819.174051] uhci_hcd 0000:04:02.0: host controller process error, something bad happened!
[  819.174056] uhci_hcd 0000:04:02.0: host controller halted, very bad!
[  819.174071] uhci_hcd 0000:04:02.0: HCRESET not completed yet!
[  819.174079] uhci_hcd 0000:04:02.0: HC died; cleaning up
[  853.946630] usb 2-5: new high-speed USB device number 5 using ehci-pci
[  860.231257] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[  860.231999] i915: render error detected, EIR: 0x00000010
[  860.232002] i915: page table error
[  860.232003] i915:   PGTBL_ER: 0x00000002
[  860.232007] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[  860.232015] i915: render error detected, EIR: 0x00000010
[  860.232017] i915: page table error
[  860.232018] i915:   PGTBL_ER: 0x00000002
[ 1659.767339] usb 2-5: USB disconnect, device number 5
[ 3104.219737] usb 2-5: new high-speed USB device number 6 using ehci-pci
[ 3512.444917] usb 2-5: USB disconnect, device number 6
[ 3543.199710] usb 2-5: new high-speed USB device number 7 using ehci-pci
[ 7343.353809] usb 2-5: USB disconnect, device number 7
[11775.898868] usb 2-5: new high-speed USB device number 8 using ehci-pci
[13008.209099] usb 2-5: USB disconnect, device number 8
[16163.435095] usb 2-5: new high-speed USB device number 9 using ehci-pci
[22083.037390] usb 2-5: USB disconnect, device number 9
История прозаическая до нельзя:
как-то "мигнул" у меня свет и после перезагрузки началась проверка диска, в этот момент ещё раз мигнул свет. после чего система потребовала ручной проверка. запустил fsck /dev/sda4 -y и стал ждать. через несколько часов увидел то, что представлено на картинке:


И так повторяется каждый раз. Теперь приходит вручную монтировать sda4 и принудительно грузить систему. Что делать?
При загрузке выдаёт:

Nov 10 18:18:11 localhost kernel: [    0.199789] pci 0000:04:02.2: BAR 0: error updating (0xfeb00000 != 0xffffffff)
Nov 10 18:18:11 localhost kernel: [    0.477281] ehci_hcd 0000:04:02.2: can't setup
Nov 10 18:18:11 localhost kernel: [    0.477598] ehci_hcd 0000:04:02.2: init 0000:04:02.2 fail, -19
Nov 10 18:18:11 localhost kernel: [    0.978566] uhci_hcd 0000:04:02.1: host system error, PCI problems?
Nov 10 18:18:11 localhost kernel: [    0.978948] uhci_hcd 0000:04:02.1: host controller halted, very bad!
Nov 10 18:18:11 localhost kernel: [    0.979340] uhci_hcd 0000:04:02.1: HC died; cleaning up
Nov 10 18:18:11 localhost kernel: [    0.979657] usb usb10: string descriptor 0 read error: -108
Nov 10 18:18:11 localhost kernel: [    0.980260] uhci_hcd 0000:04:02.0: host system error, PCI problems?
Nov 10 18:18:11 localhost kernel: [    0.980638] uhci_hcd 0000:04:02.0: host controller halted, very bad!
Nov 10 18:18:11 localhost kernel: [    0.981033] uhci_hcd 0000:04:02.0: HC died; cleaning up
Nov 10 18:18:11 localhost kernel: [    0.981821] usb usb10: can't set config #1, error -108
Nov 10 18:18:11 localhost kernel: [    0.982328] uhci_hcd 0000:04:02.1: HC died; cleaning up
Nov 10 18:18:11 localhost kernel: [    1.076735] hub 9-0:1.0: hub_port_status failed (err = -19)
Nov 10 18:18:11 localhost kernel: [    1.077099] hub 9-0:1.0: hub_port_status failed (err = -19)
Nov 10 18:18:11 localhost kernel: [    1.077433] hub 9-0:1.0: activate --> -19
Nov 11 18:20:01 localhost kernel: [    0.196439] pci 0000:04:02.2: BAR 0: error updating (0xfeb00000 != 0xffffffff)
Nov 11 18:20:02 localhost kernel: [    0.480702] ehci_hcd 0000:04:02.2: can't setup
Nov 11 18:20:02 localhost kernel: [    0.480997] ehci_hcd 0000:04:02.2: init 0000:04:02.2 fail, -19
Nov 11 18:20:02 localhost kernel: [    3.336719] hub 9-0:1.0: connect-debounce failed, port 1 disabled
Nov 11 18:20:02 localhost kernel: [    5.343404] hub 9-0:1.0: connect-debounce failed, port 2 disabled
Nov 11 18:20:02 localhost kernel: [    5.736547] uhci_hcd 0000:04:02.0: host system error, PCI problems?
Nov 11 18:20:02 localhost kernel: [    5.736979] uhci_hcd 0000:04:02.0: host controller process error, something bad happened!
Nov 11 18:20:02 localhost kernel: [    5.737467] uhci_hcd 0000:04:02.0: host controller halted, very bad!
Nov 11 18:20:02 localhost kernel: [    5.737863] uhci_hcd 0000:04:02.0: HC died; cleaning up
Nov 11 18:20:02 localhost kernel: [    7.906731] hub 10-0:1.0: connect-debounce failed, port 1 disabled
Nov 11 18:20:02 localhost kernel: [    9.913382] hub 10-0:1.0: connect-debounce failed, port 2 disabled

Куда копать?
Решилось само, ибо забыл добавить:
# systemctl enable syslog-ng.service
При загрузке выдаёт:

Starting Syslog-NG    [BUSY] Error binding socket; addr='AF_UNIX(/run/systemd/journal/syslog)', error='No such file or directory (2)'
Error initializing source driver; source='src', id='src#0'
Error initializing message pipeline;
[FAIL] 
и перестали подключаться флешки. Пишет:
произошла неизвестная ошибка: Not Autorized
В какую сторону копать?
Есть в rc.conf такие настройки:
eth0="eth0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255"
eth1="eth1 192.168.0.1 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(eth0 eth1)
gateway="default gw 192.168.1.1"
ROUTES=(gateway)

eth0 - модем с инетом, eth1 - точка доступа, которая через комп раздает инет остальным.

как оформить сие творение в netcfg?
В процессе работы периодически появляются артефакты, подобные тем, которые можно увидеть на скриншотах ниже:


Они появляются как в окнах, так и на простых изображениях при просмотре страничек в Интернете. На рабочем столе не проявляются. Как правило, лечатся переводом окна приложения в полноэкранный режим и обратно в обычный. Но так делать уже просто надоело. В чём может быть дело?
Графика встроенная от Intel.
vadik, правила прописаны, что указано в первом посте.

После того как убрал hal и fam всё стало ОК.