| agapit |
|
|
Темы:
1
Сообщения:
4
Участник с: 25 апреля 2007
|
# fdisk -l # ls /dev core fd initctl null pts shm stderr stdin stdout # fdisk /dev/core Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklab el Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. You must set cylinders. You can do this from the extra functions menu. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) Command (m for help): p Disk /dev/core: 0 MB, 0 bytes 255 heads, 63 sectors/track, 0 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System Command (m for help): |
| agapit |
|
|
Темы:
1
Сообщения:
4
Участник с: 25 апреля 2007
|
:: Mounting Root Read-only hwclock is unable to get I/O port access: the iopl(3) call failed. :: Checking Filesystems /dev/sda1: The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> ***************** FILESYSTEM CHECK FAILED **************** * * * Please repair manually and reboot. Note that the root * * file system is currently mounted read-only. To remount * * it read-write type: mount -n -o remount,rw / * * When you exit the maintenance shell the system will * * reboot automatically. * * * ************************************************************ Press enter for maintenance (or type Control-D to continue): # |
| agapit |
|
|
Темы:
1
Сообщения:
4
Участник с: 25 апреля 2007
|
сабж не совсем верный вобщем то / видно в нем можно работать в этом отладочном режиме |
| agapit |
|
|
Темы:
1
Сообщения:
4
Участник с: 25 апреля 2007
|
был образ готовый Gimmick для coLinux запустил в нем pacman -Su после перегрузки ошибка в самом начале подозреваю UDev видно следующее — :: Mounting Root Read-only hwclock is unable to get I/O port access: the iopl(3) call failed. :: Checking Filesystems /dev/hda1: The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> ***************** FILESYSTEM CHECK FAILED **************** * * * Please repair manually and reboot. Note that the root * * file system is currently mounted read-only. To remount * * it read-write type: mount -n -o remount,rw / * * When you exit the maintenance shell the system will * * reboot automatically. * * * ************************************************************ Press enter for maintenance (or type Control-D to continue): # —- у кого такое было как бороться? e2fsck ничего не лечит не видит /dev/hda1 да и не было никакой аварии, просто после ребута случилось версия кернела 2.6.12-co-0.7.1 |