WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
Ну ёмае[[email protected]]$ ~: /usr/bin/mpd --no-daemon /home/wigust/.mpdconf errno: failed to open log file "/home/wigusti/.mpd/log" (config line 37): No such file or directory Впринципе можно сказать решено. Интересная ситуация: - через systemctl --user запускается, но не работает enable при загрузке. Интересный путь куда он делает ссылку: [[email protected]]$ ~: systemctl --user enable mpd.service ln -s '/home/wigust/.config/systemd/user/mpd.service' '/home/wigust/.config/systemd/user/multi-user.target.wants/mpd.service' systemctl --user [service] На сколько я понял, запускает от юзера service-файлом из домашней дериктории. От кого работает mpd можно указать в его конфиге (так же как у transmission), там есть "user" и "group", я указал своего пользователя и группу users. |
WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
Без --user (предварительно скопировав из /home/wigust/.config/systemd/user/mpd.service в /usr/lib/systemd/system/mpd.service)systemctl status mpd mpd.service - Music Player Daemon Loaded: loaded (/usr/lib/systemd/system/mpd.service; disabled) Active: failed (Result: exit-code) since Wed 2013-11-13 01:49:59 FET; 3s ago Process: 770 ExecStart=/usr/bin/mpd --no-daemon /home/wigust/.mpdconf (code=exited, status=1/FAILURE) Main PID: 770 (code=exited, status=1/FAILURE) /home/wigusti/.mpd/log не создается, думаю т.к. при простом $ mpd запуске нету ошибок, а при systemd до mpd не доходит. [[email protected]]$ ~: vim .mpd/ database playlists/ state sticker.sql Что еще можно сделать? |
WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
Не как не могу заставить стартануть.$ systemctl --user status mpd mpd.service - Music Player Daemon Loaded: loaded (/home/wigust/.config/systemd/user/mpd.service; disabled) Active: failed (Result: exit-code) since Tue 2013-11-12 19:33:17 FET; 4min 46s ago Process: 1576 ExecStart=/usr/bin/mpd --no-daemon /home/wigust/.mpdconf (code=exited, status=1/FAILURE) Main PID: 1576 (code=exited, status=1/FAILURE) Nov 12 19:33:17 C90S systemd[489]: Starting Music Player Daemon... Nov 12 19:33:17 C90S systemd[489]: Started Music Player Daemon. Nov 12 19:33:17 C90S systemd[489]: mpd.service: main process exited, code=exited, status=1/FAILURE Nov 12 19:33:17 C90S systemd[489]: Unit mpd.service entered failed state. /home/wigust/.config/systemd/user/mpd.service [Unit] Description=Music Player Daemon After=network.target sound.target [Service] ExecStart=/usr/bin/mpd --no-daemon /home/wigust/.mpdconf [Install] WantedBy=multi-user.target Если запускать просто mpd --verbose --stdout --no-daemon, то все работает-вопроизводится. /home/wigust/.mpdconf # An example configuration file for MPD. # Read the user manual for documentation: http://www.musicpd.org/doc/user/ # Files and directories ####################################################### # # This setting controls the top directory which MPD will search to discover the # available audio files and add them to the daemon's online database. This # setting defaults to the XDG directory, otherwise the music directory will be # be disabled and audio files will only be accepted over ipc socket (using # file:// protocol) or streaming files over an accepted protocol. # music_directory "/home/wigust/Music/" # # This setting sets the MPD internal playlist directory. The purpose of this # directory is storage for playlists created by MPD. The server will use # playlist files not created by the server but only if they are in the MPD # format. This setting defaults to playlist saving being disabled. # playlist_directory "/home/wigust/.mpd/playlists" # # This setting sets the location of the MPD database. This file is used to # load the database at server start up and store the database while the # server is not up. This setting defaults to disabled which will allow # MPD to accept files over ipc socket (using file:// protocol) or streaming # files over an accepted protocol. # db_file "/home/wigust/.mpd/database" # # These settings are the locations for the daemon log files for the daemon. # These logs are great for troubleshooting, depending on your log_level # settings. # # The special value "syslog" makes MPD use the local syslog daemon. This # setting defaults to logging to syslog, otherwise logging is disabled. # log_file "/home/wigusti/.mpd/log" # # This setting sets the location of the file which stores the process ID # for use of mpd --kill and some init scripts. This setting is disabled by # default and the pid file will not be stored. # pid_file "/home/wigust/.mpd/pid" # # This setting sets the location of the file which contains information about # most variables to get MPD back into the same general shape it was in before # it was brought down. This setting is disabled by default and the server # state will be reset on server start up. # state_file "/home/wigust/.mpd/state" # # The location of the sticker database. This is a database which # manages dynamic information attached to songs. # sticker_file "/home/wigust/.mpd/sticker.sql" # ############################################################################### # General music daemon options ################################################ # # This setting specifies the user that MPD will run as. MPD should never run as # root and you may use this setting to make MPD change its user ID after # initialization. This setting is disabled by default and MPD is run as the # current user. # #user "wigust" # # This setting specifies the group that MPD will run as. If not specified # primary group of user specified with "user" setting will be used (if set). # This is useful if MPD needs to be a member of group such as "audio" to # have permission to use sound card. # #group "users" # # This setting sets the address for the daemon to listen on. Careful attention # should be paid if this is assigned to anything other then the default, any. # This setting can deny access to control of the daemon. # # For network bind_to_address "0.0.0.0" # # And for Unix Socket #bind_to_address "~/.mpd/socket" # # This setting is the TCP port that is desired for the daemon to get assigned # to. # port "6600" # # This setting controls the type of information which is logged. Available # setting arguments are "default", "secure" or "verbose". The "verbose" setting # argument is recommended for troubleshooting, though can quickly stretch # available resources on limited hardware storage. # #log_level "default" # # If you have a problem with your MP3s ending abruptly it is recommended that # you set this argument to "no" to attempt to fix the problem. If this solves # the problem, it is highly recommended to fix the MP3 files with vbrfix # (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which # point gapless MP3 playback can be enabled. # #gapless_mp3_playback "yes" # # Setting "restore_paused" to "yes" puts MPD into pause mode instead # of starting playback after startup. # #restore_paused "no" # # This setting enables MPD to create playlists in a format usable by other # music players. # #save_absolute_paths_in_playlists "no" # # This setting defines a list of tag types that will be extracted during the # audio file discovery process. The complete list of possible values can be # found in the mpd.conf man page. #metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" # # This setting enables automatic update of MPD's database when files in # music_directory are changed. # auto_update "yes" # # Limit the depth of the directories being watched, 0 means only watch # the music directory itself. There is no limit by default. # #auto_update_depth "3" # ############################################################################### # Symbolic link behavior ###################################################### # # If this setting is set to "yes", MPD will discover audio files by following # symbolic links outside of the configured music_directory. # #follow_outside_symlinks "yes" # # If this setting is set to "yes", MPD will discover audio files by following # symbolic links inside of the configured music_directory. # #follow_inside_symlinks "yes" # ############################################################################### # Zeroconf / Avahi Service Discovery ########################################## # # If this setting is set to "yes", service information will be published with # Zeroconf / Avahi. # #zeroconf_enabled "yes" # # The argument to this setting will be the Zeroconf / Avahi unique name for # this MPD server on the network. # #zeroconf_name "Music Player" # ############################################################################### # Permissions ################################################################# # # If this setting is set, MPD will require password authorization. The password # can setting can be specified multiple times for different password profiles. # #password "[email protected],add,control,admin" # # This setting specifies the permissions a user has who has not yet logged in. # #default_permissions "read,add,control,admin" # ############################################################################### # Database ####################################################################### # #database { # plugin "proxy" # host "other.mpd.host" # port "6600" #} # Input ####################################################################### # input { plugin "curl" # proxy "proxy.isp.com:8080" # proxy_user "user" # proxy_password "password" } # ############################################################################### # Audio Output ################################################################ # # MPD supports various audio output types, as well as playing through multiple # audio outputs at the same time, through multiple audio_output settings # blocks. Setting this block is optional, though the server will only attempt # autodetection for one sound card. # # An example of an ALSA output: # audio_output { type "alsa" name "My ALSA Device" ## device "hw:0,0" # optional ## format "44100:16:2" # optional ## mixer_type "hardware" # optional ## mixer_device "default" # optional ## mixer_control "PCM" # optional ## mixer_index "0" # optional } # # An example of an OSS output: # #audio_output { # type "oss" # name "My OSS Device" ## device "/dev/dsp" # optional ## format "44100:16:2" # optional ## mixer_type "hardware" # optional ## mixer_device "/dev/mixer" # optional ## mixer_control "PCM" # optional #} # # An example of a shout output (for streaming to Icecast): # #audio_output { # type "shout" # encoding "ogg" # optional # name "My Shout Stream" # host "localhost" # port "8000" # mount "/mpd.ogg" # password "hackme" # quality "5.0" # bitrate "128" # format "44100:16:1" ## protocol "icecast2" # optional ## user "source" # optional ## description "My Stream Description" # optional ## url "http://example.com" # optional ## genre "jazz" # optional ## public "no" # optional ## timeout "2" # optional ## mixer_type "software" # optional #} # # An example of a recorder output: # #audio_output { # type "recorder" # name "My recorder" # encoder "vorbis" # optional, vorbis or lame # path "/var/lib/mpd/recorder/mpd.ogg" ## quality "5.0" # do not define if bitrate is defined # bitrate "128" # do not define if quality is defined # format "44100:16:1" #} # # An example of a httpd output (built-in HTTP streaming server): # #audio_output { # type "httpd" # name "My HTTP Stream" # encoder "vorbis" # optional, vorbis or lame # port "8000" # bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 ## quality "5.0" # do not define if bitrate is defined # bitrate "128" # do not define if quality is defined # format "44100:16:1" # max_clients "0" # optional 0=no limit #} # # An example of a pulseaudio output (streaming to a remote pulseaudio server) # #audio_output { # type "pulse" # name "My Pulse Output" ## server "remote_server" # optional ## sink "remote_server_sink" # optional #} # # An example of a winmm output (Windows multimedia API). # #audio_output { # type "winmm" # name "My WinMM output" ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional # or ## device "0" # optional ## mixer_type "hardware" # optional #} # # An example of an openal output. # #audio_output { # type "openal" # name "My OpenAL output" ## device "Digital Audio (S/PDIF) (High Definition Audio Device)" # optional #} # ## Example "pipe" output: # #audio_output { # type "pipe" # name "my pipe" # command "aplay -f cd 2>/dev/null" ## Or if you're want to use AudioCompress # command "AudioCompress -m | aplay -f cd 2>/dev/null" ## Or to send raw PCM stream through PCM: # command "nc example.org 8765" # format "44100:16:2" #} # ## An example of a null output (for no audio output): # #audio_output { # type "null" # name "My Null Output" # mixer_type "none" # optional #} # # This setting will change all decoded audio to be converted to the specified # format before being passed to the audio outputs. By default, this setting is # disabled. # #audio_output_format "44100:16:2" # # If MPD has been compiled with libsamplerate support, this setting specifies # the sample rate converter to use. Possible values can be found in the # mpd.conf man page or the libsamplerate documentation. By default, this is # setting is disabled. # #samplerate_converter "Fastest Sinc Interpolator" # ############################################################################### # Normalization automatic volume adjustments ################################## # # This setting specifies the type of ReplayGain to use. This setting can have # the argument "off", "album", "track" or "auto". "auto" is a special mode that # chooses between "track" and "album" depending on the current state of # random playback. If random playback is enabled then "track" mode is used. # See <http://www.replaygain.org> for more details about ReplayGain. # This setting is off by default. # #replaygain "album" # # This setting sets the pre-amp used for files that have ReplayGain tags. By # default this setting is disabled. # #replaygain_preamp "0" # # This setting sets the pre-amp used for files that do NOT have ReplayGain tags. # By default this setting is disabled. # #replaygain_missing_preamp "0" # # This setting enables or disables ReplayGain limiting. # MPD calculates actual amplification based on the ReplayGain tags # and replaygain_preamp / replaygain_missing_preamp setting. # If replaygain_limit is enabled MPD will never amplify audio signal # above its original level. If replaygain_limit is disabled such amplification # might occur. By default this setting is enabled. # #replaygain_limit "yes" # # This setting enables on-the-fly normalization volume adjustment. This will # result in the volume of all playing audio to be adjusted so the output has # equal "loudness". This setting is disabled by default. # #volume_normalization "no" # ############################################################################### # MPD Internal Buffering ###################################################### # # This setting adjusts the size of internal decoded audio buffering. Changing # this may have undesired effects. Don't change this if you don't know what you # are doing. # #audio_buffer_size "4096" # # This setting controls the percentage of the buffer which is filled before # beginning to play. Increasing this reduces the chance of audio file skipping, # at the cost of increased time prior to audio playback. # #buffer_before_play "10%" # ############################################################################### # Resource Limitations ######################################################## # # These settings are various limitations to prevent MPD from using too many # resources. Generally, these settings should be minimized to prevent security # risks, depending on the operating resources. # #connection_timeout "60" #max_connections "10" #max_playlist_length "16384" #max_command_list_size "2048" #max_output_buffer_size "8192" # ############################################################################### # Character Encoding ########################################################## # # If file or directory names do not display correctly for your locale then you # may need to modify this setting. # filesystem_charset "UTF-8" # # This setting controls the encoding that ID3v1 tags should be converted from. # #id3v1_encoding "ISO-8859-1" # ############################################################################### # SIDPlay decoder ############################################################# # # songlength_database: # Location of your songlengths file, as distributed with the HVSC. # The sidplay plugin checks this for matching MD5 fingerprints. # See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq # # default_songlength: # This is the default playing time in seconds for songs not in the # songlength database, or in case you're not using a database. # A value of 0 means play indefinitely. # # filter: # Turns the SID filter emulation on or off. # #decoder { # plugin "sidplay" # songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt" # default_songlength "120" # filter "true" #} # ############################################################################### |
WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
При обновлении через графическую утилиту сыпятся ошибки. Android SDK Manager Log Preparing to install archives Downloading SDK Platform Android 4.3, API 18, revision 2 URL not found: /opt/android-sdk/temp/android-18_r02.zip (Permission denied) Downloading Android Support Library, revision 19 URL not found: /opt/android-sdk/temp/support_r19.zip (Permission denied) Done. Nothing was installed. Нужно запустить из под рута, подумал я, и вот: [[email protected]]$ ~: cd /opt/android-sdk/tools/ [[email protected]]$ tools: sudo sh ./android sdk No protocol specified Exception in thread "main" org.eclipse.swt.SWTError: No more handles [gtk_init_check() failed] at org.eclipse.swt.SWT.error(Unknown Source) at org.eclipse.swt.widgets.Display.createDisplay(Unknown Source) at org.eclipse.swt.widgets.Display.create(Unknown Source) at org.eclipse.swt.graphics.Device.<init>(Unknown Source) at org.eclipse.swt.widgets.Display.<init>(Unknown Source) at org.eclipse.swt.widgets.Display.<init>(Unknown Source) at org.eclipse.swt.widgets.Display.getDefault(Unknown Source) at org.eclipse.swt.widgets.Shell.<init>(Unknown Source) at org.eclipse.swt.widgets.Shell.<init>(Unknown Source) at com.android.sdkuilib.internal.repository.ui.SdkUpdaterWindowImpl2.createShell(SdkUpdaterWindowImpl2.java:168) at com.android.sdkuilib.internal.repository.ui.SdkUpdaterWindowImpl2.open(SdkUpdaterWindowImpl2.java:137) at com.android.sdkuilib.repository.SdkUpdaterWindow.open(SdkUpdaterWindow.java:111) at com.android.sdkmanager.Main.showSdkManagerWindow(Main.java:356) at com.android.sdkmanager.Main.doAction(Main.java:320) at com.android.sdkmanager.Main.run(Main.java:120) at com.android.sdkmanager.Main.main(Main.java:103) |
WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
lampslave, вроде работает правильно, нашел тут |
WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
lampslave, спасибо Решение: [Unit] Description=Transmission BitTorrent Daemon After=network.target run-media-wigust-hdd.mount Requires=run-media-wigust-hdd.mount [Service] User=transmission Type=notify ExecStart=/usr/bin/transmission-daemon -f --log-error [Install] WantedBy=multi-user.target P.S.: Так же сделал для mediatomb [Unit] Description=MediaTomb Daemon After=network.target run-media-wigust-hdd.mount Requires=run-media-wigust-hdd.mount [Service] EnvironmentFile=/etc/conf.d/mediatomb ExecStart=/usr/bin/mediatomb -p $MT_PORT -u $MT_USER -g $MT_GROUP \ -P $MT_PIDFILE -l $MT_LOGFILE -m $MT_HOME -f $MT_CFGDIR $MT_OPTIONS Restart=on-failure RestartSec=5 [Install] WantedBy=multi-user.target |
WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
Нужно стартовать сервис после монтирования. Имеются:[Unit] Description=Transmission BitTorrent Daemon After=network.target [Service] User=transmission Type=notify ExecStart=/usr/bin/transmission-daemon -f --log-error [Install] WantedBy=multi-user.target [Unit] Description = HDD disk [Mount] What = LABEL=hdd Where = /run/media/wigust/hdd/ Type = ext4 [Install] WantedBy = multi-user.target |
WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
domov0y, точно, посмотрел на папку - права есть, а на сами *.exe нету! Добавил, и все завилось. Всем спасибо :) |
WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
Medar, ну некоторые проги ставяться спокойно же. Еще появилась идея попробовать через samba, результат тот же :( |
WiGust |
|
Темы:
12
Сообщения:
63
Участник с: 17 августа 2013
|
Вообщем есть внешний винт в формате ext4. Его расшарил на виртуальной Windows. Не открываются многие файлы установщики и выдают ошибку *.exe узанный путь не существует. Настройки расшаренной папки Для маленьких программ это не проблема, можно просто скопировать на саму виртуальную машину, но если она побольше, то не вариант. |