я еще не пробовал менять терминал
[[email protected] ~]$ cat .xinitrc
exec openbox-session
[[email protected] ~]$
спасибо, что помогаете! :) я на линуксе относительно давно...на Убунте с 10 версии, вот крайние несколько месяцев на Арче, очень доволен дистрибутивом! ну разве что небольшие неудобства вот такие мелочи, вроде как stop job is running login service...

кстати, сейчас перезагрузился и ошибка другая какая-то stop session c1 или c2 не помню уже) с таким же неограниченным отсчетом, как и stop job is running login service
а как сделать? это нужно в .bash_profile исправить?
[[email protected] sasha]# lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
[[email protected] sasha]#
[[email protected] sasha]# cat /var/log/Xorg.0.log | grep EE
[    21.816] Current Operating System: Linux sashapc 4.4.1-2-ARCH #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016 x86_64
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.989] (EE) Failed to load module "intel" (module does not exist, 0)
[    21.989] (EE) Failed to load module "ati" (module does not exist, 0)
[    22.000] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    22.000] (EE) Failed to load module "vesa" (module does not exist, 0)

это после перезагрузки после указания в модулях mkinitcpio: i915 radeon
[[email protected] ~]$ cat /var/log/Xorg.0.log | grep EE
[    22.498] Current Operating System: Linux sashapc 4.4.1-2-ARCH #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016 x86_64
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.671] (EE) Failed to load module "intel" (module does not exist, 0)
[    22.671] (EE) Failed to load module "ati" (module does not exist, 0)
[    22.682] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    22.682] (EE) Failed to load module "vesa" (module does not exist, 0)
[[email protected] ~]$
[[email protected] sasha]# nano /etc/mkinitcpio.conf
[[email protected] sasha]# mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 4.4.1-2-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> ERROR: module not found: `intel'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
==> WARNING: errors were encountered during the build. The image may not be complete.
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 4.4.1-2-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: wd719x
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> ERROR: module not found: `intel'
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> WARNING: errors were encountered during the build. The image may not be complete.
[[email protected] sasha]#


оставил только radeon, перезагружаюсь:

[[email protected] sasha]# nano /etc/mkinitcpio.conf
[[email protected] sasha]# mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 4.4.1-2-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 4.4.1-2-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: wd719x
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful

[[email protected] ~]$ cat /var/log/Xorg.0.log | grep EE
[    86.010] Current Operating System: Linux sashapc 4.4.1-2-ARCH #1 SMP PREEMPT Wed Feb 3 13:12:33 UTC 2016 x86_64
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    86.193] (EE) Failed to load module "intel" (module does not exist, 0)
[    86.194] (EE) Failed to load module "ati" (module does not exist, 0)
[    86.205] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    86.205] (EE) Failed to load module "vesa" (module does not exist, 0)
[[email protected] ~]$

[[email protected] sasha]# lshw -c display
  *-display
       description: VGA compatible controller
       product: Haswell-ULT Integrated Graphics Controller
       vendor: Intel Corporation
       physical id: 2
       bus info: [email protected]:00:02.0
       version: 09
       width: 64 bits
       clock: 33MHz
       capabilities: msi pm vga_controller bus_master cap_list rom
       configuration: driver=i915 latency=0
       resources: irq:49 memory:c0000000-c03fffff memory:b0000000-bfffffff ioport:4000(size=64)
[[email protected] sasha]#