| Piter.z |  | 
| 
                Темы:
                
                    5
                
             
                Сообщения:
                
                    24
                
             
                Участник с: 07 апреля 2013
             | AivarВы меня не правильно поняли. Выключен нумлок, включен нумлок: нажатие на нумпад начинает двигать курсор. | 
| Piter.z |  | 
| 
                Темы:
                
                    5
                
             
                Сообщения:
                
                    24
                
             
                Участник с: 07 апреля 2013
             | По-первых CUPS не работает при запуске системы и приходится писать так: # systemctl start cupsd.service # systemctl enable cupsd.service Failed to issue method call: No such file or directory Если зайти через браузер на localhost:631 и попробовать открыть раздел с принтерами то выдается ошибка: Unable to add printer:Хотя еще вчера все работало. Принтер Xerox Phaser 3140. Открытых драйверов не нашел, поэтому поставил проприретарный с сайта производителя. Вчера все работало, тестовая страница распечаталась. Файл /etc/cups/cupsd.conf: #
# "$Id: cupsd.conf.in 10710 2012-11-26 18:26:01Z mike $"
#
# Sample configuration file for the CUPS scheduler.  See "man cupsd.conf" for a
# complete description of this file.
#
HostNameLookups Double
DefaultEncryption Never
# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel debug
# Only listen for connections from the local machine.
Port 631
Listen /var/run/cups/cups.sock
# Show shared printers on the local network.
Browsing On
BrowseLocalProtocols dnssd
# Default authentication type, when authentication is required...
DefaultAuthType Basic
# Web interface setting...
WebInterface Yes
# Restrict access to the server...
<Location />
  Order allow,deny
   Allow From localhost
   Allow From 192.168.1.0/255.255.255.0
</Location>
# Restrict access to the admin pages...
<Location /admin>
  Order allow,deny
  Allow From localhost
</Location>
# Restrict access to configuration files...
<Location /admin/conf>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
  Allow From localhost
</Location>
# Set the default printer/job policies...
<Policy default>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default
  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    Order deny,allow
  </Limit>
  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
# Set the authenticated printer/job policies...
<Policy authenticated>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default
  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Default
    Order deny,allow
  </Limit>
  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>
  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>
  <Limit All>
    Order deny,allow
  </Limit>
</Policy>
#
# End of "$Id: cupsd.conf.in 10710 2012-11-26 18:26:01Z mike $".
# | 
| Piter.z |  | 
| 
                Темы:
                
                    5
                
             
                Сообщения:
                
                    24
                
             
                Участник с: 07 апреля 2013
             | У меня стоит Gnome 3.8. Хочу чтобы нормально работал нумпад. Сейчас он занимается тем, что двигает курсор мыши. Как заставить его работать корректно? Нажатие на нумпад приводит к перемещению курсора по экрану. Так быть не должно. В ~/.xinitrc прописано: numlockx on exec gnome-session | 
| Piter.z |  | 
| 
                Темы:
                
                    5
                
             
                Сообщения:
                
                    24
                
             
                Участник с: 07 апреля 2013
             | $ skype Ошибка сегментирования (core dumped) Похожая ошибка встречалась и у другихпользователей, но в отличие от них, у меня не проходит даже первый запуск. Скайп ставил из официальных репозиториев. Что делать? |