Большое спасибо! Заработало.
Заменил /bin/false на /bin/bash
naszar
ImperialDwarf
/bin/false
А вот и болячка.. поменял шел гиту на false и получил вашу ошибку.
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Насколько я понимаю у вас было выставлено /pathtogitlab/gitlab-shell/bin/gitlab-shell ?
Попробовал подцепить самописный скрипт в виде "echo test" заместо gitlab-shell и выскочила такая же ошибка.
                                                                                                                                  8233259/8080K              99%
янв 27 14:38:44 gitlab sshd[3430]: debug1: input_session_request
янв 27 14:38:44 gitlab sshd[3430]: debug1: channel 0: new [server-session]
янв 27 14:38:44 gitlab sshd[3430]: debug2: session_new: allocate (allocated 0 max 10)
янв 27 14:38:44 gitlab sshd[3430]: debug3: session_unused: session id 0 unused
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_new: session 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_open: channel 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_open: session 0: link with channel 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: server_input_channel_open: confirm session
янв 27 14:38:44 gitlab sshd[3430]: debug1: server_input_channel_req: channel 0 request pty-req reply 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_by_channel: session 0 channel 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_input_channel_req: session 0 req pty-req
янв 27 14:38:44 gitlab sshd[3430]: debug1: Allocating a pty not permitted for this authentication.
янв 27 14:38:44 gitlab sshd[3430]: debug1: server_input_channel_req: channel 0 request shell reply 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_by_channel: session 0 channel 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_input_channel_req: session 0 req shell
янв 27 14:38:44 gitlab sshd[3430]: debug1: Forced command (key option) '/home/git/test'
янв 27 14:38:44 gitlab sshd[3430]: debug2: fd 3 setting TCP_NODELAY
янв 27 14:38:44 gitlab sshd[3430]: debug3: packet_set_tos: set IP_TOS 0x08
янв 27 14:38:44 gitlab sshd[3430]: debug2: fd 10 setting O_NONBLOCK
янв 27 14:38:44 gitlab sshd[3430]: debug2: fd 9 setting O_NONBLOCK
янв 27 14:38:44 gitlab sshd[3430]: debug2: fd 12 setting O_NONBLOCK
янв 27 14:38:44 gitlab sshd[3432]: debug3: Copy environment: MAIL=/var/spool/mail/git
янв 27 14:38:44 gitlab sshd[3432]: debug3: Copy environment: XDG_SESSION_ID=17
янв 27 14:38:44 gitlab sshd[3432]: debug3: Copy environment: XDG_RUNTIME_DIR=/run/user/1002
янв 27 14:38:44 gitlab sshd[3430]: debug1: Received SIGCHLD.
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_by_pid: pid 3432
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_exit_message: session 0 channel 0 pid 3432
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: request exit-status confirm 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_exit_message: release channel 0
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: write failed
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: close_write
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: send eow
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: output open -> closed
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: read<=0 rfd 10 len 0
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: read failed
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: close_read
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: input open -> drain
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: read 0 from efd 12
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: closing read-efd 12
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: ibuf empty
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: send eof
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: input drain -> closed
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: send close
янв 27 14:38:44 gitlab sshd[3430]: debug2: notify_done: reading
янв 27 14:38:44 gitlab sshd[3430]: debug3: channel 0: will not send data after close
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: rcvd close
янв 27 14:38:44 gitlab sshd[3430]: debug3: channel 0: will not send data after close
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: is dead
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: gc: notify user
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_by_channel: session 0 channel 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_close_by_channel: channel 0 child 0
янв 27 14:38:44 gitlab sshd[3430]: debug1: session_close: session 0 pid 0
янв 27 14:38:44 gitlab sshd[3430]: debug3: session_unused: session id 0 unused
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: gc: user detached
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: is dead
янв 27 14:38:44 gitlab sshd[3430]: debug2: channel 0: garbage collecting
янв 27 14:38:44 gitlab sshd[3430]: debug1: channel 0: free: server-session, nchannels 1
янв 27 14:38:44 gitlab sshd[3430]: debug3: channel 0: status: The following connections are open:\r\n  #0 server-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1)\r\n
янв 27 14:38:44 gitlab sshd[3430]: Connection closed by ******
янв 27 14:38:44 gitlab sshd[3430]: debug1: do_cleanup
янв 27 14:38:44 gitlab sshd[3430]: debug3: PAM: sshpam_thread_cleanup entering
янв 27 14:38:44 gitlab sshd[3430]: Transferred: sent 3440, received 2392 bytes
янв 27 14:38:44 gitlab sshd[3430]: Closing connection to ****** port 64196
янв 27 14:38:44 gitlab sshd[3430]: debug3: mm_request_send entering: type 50
янв 27 14:38:44 gitlab sshd[3427]: debug3: mm_request_receive entering
янв 27 14:38:44 gitlab sshd[3427]: debug3: monitor_read: checking request 50
янв 27 14:38:44 gitlab sshd[3427]: debug3: mm_answer_term: tearing down sessions
янв 27 14:38:44 gitlab sshd[3427]: debug1: PAM: cleanup
янв 27 14:38:44 gitlab sshd[3427]: debug1: PAM: closing session
P.s. по ауровской версии гитлаба есть нормальный гайд по которому можно его завести?
Выхлоп ката:
git:x:1002:1002::/home/git:/bin/false
Выше выкладывал лог серверной части с включенным режимом DEBUG3. В нем собственно и отрыл ошибку.
Сейчас попробую подменить gitlab-shell еще чем нибудь.
В общем проблема в sshd, но пока еще не знаю как ее решить(
Jan 27 07:47:13 gitlab sshd[6435]: debug1: Forced command (key option) '/home/git/gitlab-shell/bin/gitlab-shell key-1'
Jan 27 07:47:13 gitlab sshd[6435]: debug2: fd 3 setting TCP_NODELAY
Jan 27 07:47:13 gitlab sshd[6435]: debug3: packet_set_tos: set IP_TOS 0x08
Jan 27 07:47:13 gitlab sshd[6435]: debug2: fd 10 setting O_NONBLOCK
Jan 27 07:47:13 gitlab sshd[6435]: debug2: fd 9 setting O_NONBLOCK
Jan 27 07:47:13 gitlab sshd[6437]: debug3: Copy environment: MAIL=/var/spool/mail/git
Jan 27 07:47:13 gitlab sshd[6435]: debug2: fd 12 setting O_NONBLOCK
Jan 27 07:47:13 gitlab sshd[6437]: debug3: Copy environment: XDG_SESSION_ID=11
Jan 27 07:47:13 gitlab sshd[6437]: debug3: Copy environment: XDG_RUNTIME_DIR=/run/user/1000
Jan 27 07:47:13 gitlab sshd[6435]: debug1: Received SIGCHLD.
Jan 27 07:47:13 gitlab sshd[6435]: debug1: session_by_pid: pid 6437
Jan 27 07:47:13 gitlab sshd[6435]: debug1: session_exit_message: session 0 channel 0 pid 6437
Jan 27 07:47:13 gitlab sshd[6435]: debug2: channel 0: request exit-status confirm 0
Jan 27 07:47:13 gitlab sshd[6435]: debug1: session_exit_message: release channel 0
Jan 27 07:47:13 gitlab sshd[6435]: debug2: channel 0: write failed
С версией из аура на текущий момент еще не до конца разобрался ибо гайд частично неактуальный и требуются пляски с бубном и правки.
Авторизация проходит, но насколько я понимаю нет перенаправления с ssh на gitlab-shell. В логах gitlab и gitlab-shell пусто и лог sshd тоже не выдает ничего криминального. Больше всего добивает, то что выполняя эту же последовательность действий под убунту 13.04 все сразу стартует нормально.
После установки и настройки Gitlab на арче не могу подключиться по ssh к пользователю git с использованием ключей (добавляю через веб интерфейс). При попытке сделать git push выдает ошибку, что не может прочитать из удаленного репозитория. Push по средствам http работает отлично. Ситуация возникает только под арчем (установка по гайду по ubuntu заводится с пол тычка). Проблема повторяемая и возникает при каждой установке по этой схеме. Для развертки использую домашний сервер (i7 2600k, 16 гигов памяти и ssd) и сервера у digitalocean.com (тариф за 10 долларов с 1 гигом оперативки, базовый образ Arch Linux 2013.05 x64).

Кто нибудь сталкивался с похожей ситуацией? Если да, то как решали? Заранее спасибо.

Гайд по которому устанавливаю:

https://github.com/gitlabhq/gitlabhq/blob/6-5-stable/doc/install/installation.md

Набор пакетов при установке:

sudo pacman -S sudo base-devel zlib libyaml openssl gdbm readline ncurses libffi curl git openssh redis checkinstall libxml2 libxslt icu python2 python-docutils nginx mariadb ruby

gemrc: --no-user-install

Скрипты для systemd беру по ссылкам:

gitlab.target

gitlab-sidekiq.service

gitlab-unicorn.service

$ git push -u origin master
Enter passphrase for key '/c/Users/*****/.ssh/id_rsa':
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.

Подключение к серверу по ssh c оффтопика(пробовал также с ноута с арчем результат тот же)
$ ssh -vT [email protected]*****
OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007
debug1: Connecting to ***** [*****] port 22.
debug1: Connection established.
debug1: identity file /c/Users/*****/.ssh/identity type -1
debug1: identity file /c/Users/*****/.ssh/id_rsa type 1
debug1: identity file /c/Users/*****/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.4
debug1: match: OpenSSH_6.4 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.6
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host '*****' is known and matches the RSA host key.
debug1: Found key in /c/Users/******/.ssh/known_hosts:3
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,password
debug1: Next authentication method: publickey
debug1: Trying private key: /c/Users/*****/.ssh/identity
debug1: Offering public key: /c/Users/*****/.ssh/id_rsa
debug1: Server accepts key: pkalg ssh-rsa blen 277
debug1: PEM_read_PrivateKey failed
debug1: read PEM private key done: type <unknown>
Enter passphrase for key '/c/Users/*****/.ssh/id_rsa':
debug1: read PEM private key done: type RSA
debug1: Authentication succeeded (publickey).
debug1: channel 0: new [client-session]
debug1: Entering interactive session.
debug1: Remote: Forced command.
debug1: Remote: Port forwarding disabled.
debug1: Remote: X11 forwarding disabled.
debug1: Remote: Agent forwarding disabled.
debug1: Remote: Pty allocation disabled.
debug1: Remote: Forced command.
debug1: Remote: Port forwarding disabled.
debug1: Remote: X11 forwarding disabled.
debug1: Remote: Agent forwarding disabled.
debug1: Remote: Pty allocation disabled.
debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
debug1: channel 0: free: client-session, nchannels 1
debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.4 seconds
debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
debug1: Exit status 1

cat /home/git/.ssh/authorized_keys
command="/home/git/gitlab-shell/bin/gitlab-shell key-1",no-port-forwarding,no-X11-forwarding,no-agent-forwarding,no-pty ssh-rsa ******** ****@*****

Gitlab check
[[email protected] gitlab]# sudo -u git -H bundle exec rake gitlab:check RAILS_ENV=production
Checking Environment ...
Git configured for git user? ... yes
Has python2? ... yes
python2 is supported version? ... yes
Checking Environment ... Finished
Checking GitLab Shell ...
GitLab Shell version >= 1.7.9 ? ... OK (1.8.0)
Repo base directory exists? ... yes
Repo base directory is a symlink? ... no
Repo base owned by git:git? ... yes
Repo base access is drwxrws---? ... yes
update hook up-to-date? ... yes
update hooks in repos are links: ...
Administrator / test ... repository is empty
Running /home/git/gitlab-shell/bin/check
Check GitLab API access: OK
Check directories and files:
        /home/git/repositories: OK
        /home/git/.ssh/authorized_keys: OK
Test redis-cli executable: redis-cli 2.8.4
Send ping to redis server: PONG
gitlab-shell self-check successful
Checking GitLab Shell ... Finished
Checking Sidekiq ...
Running? ... yes
Number of Sidekiq processes ... 1
Checking Sidekiq ... Finished
Checking LDAP ...
LDAP is disabled in config/gitlab.yml
Checking LDAP ... Finished
Checking GitLab ...
Database config exists? ... yes
Database is SQLite ... no
All migrations up? ... yes
GitLab config exists? ... yes
GitLab config outdated? ... no
Log directory writable? ... yes
Tmp directory writable? ... yes
Init script exists? ... no
  Try fixing it:
  Install the init script
  For more information see:
  doc/install/installation.md in section "Install Init Script"
  Please fix the error above and rerun the checks.
Init script up-to-date? ... can't check because of previous errors
projects have namespace: ...
Administrator / test ... yes
Projects have satellites? ...
Administrator / test ... can't create, repository is empty
Redis version >= 2.0.0? ... yes
Your git bin path is "/usr/bin/git"
Git version >= 1.7.10 ? ... yes (1.8.5)
Checking GitLab ... Finished

Gitlab info
[[email protected] gitlab]# sudo -u git -H bundle exec rake gitlab:env:info RAILS_ENV=production
System information
System:         Arch Linux
Current User:   git
Using RVM:      no
Ruby Version:   2.0.0p353
Gem Version:    2.0.14
Bundler Version:1.5.2
Rake Version:   10.1.0
GitLab information
Version:        6.5.1
Revision:       6f6f158
Directory:      /home/git/gitlab
DB Adapter:     mysql2
URL:            http://localhost
HTTP Clone URL: http://localhost/some-project.git
SSH Clone URL:  [email protected]:some-project.git
Using LDAP:     no
Using Omniauth: no
GitLab Shell
Version:        1.8.0
Repositories:   /home/git/repositories/
Hooks:          /home/git/gitlab-shell/hooks/
Git:            /usr/bin/git
нз
https://www.archlinux.org/packages/multilib/x86_64/steam/