BlueTooth

options {
        # Automatically initialize new devices
        autoinit yes;
        # Security Manager mode
        #   none - Security manager disabled
        #   auto - Use local PIN for incoming connections
        #   user - Always ask user for a PIN
        #
        security user;
        # Pairing mode
        #   none  - Pairing disabled
        #   multi - Allow pairing with already paired devices
        #   once  - Pair once and deny successive attempts
        pairing multi;
        # PIN helper
          pin_helper /etc/bluetooth/pin;
        # D-Bus PIN helper
        #dbus_pin_helper;
}
# Default settings for HCI devices
device {
        # Local device name
        #   %d - device id
        #   %h - host name
        name "%h-%d";
        # Local device class
        class 0x120104;
        # Default packet type
        #pkt_type DH1,DM1,HV1;
        # Inquiry and Page scan
        iscan enable; pscan enable;
        # Default link mode
        #   none   - no specific policy
        #   accept - always accept incoming connections
        #   master - become master on incoming connections,
        #            deny role switch on outgoing connections
        lm accept;
        # Default link policy
        #   none    - no specific policy
        #   rswitch - allow role switch
        #   hold    - allow hold mode
        #   sniff   - allow sniff mode
        #   park    - allow park mode
        lp rswitch,hold,sniff,park;
        # Authentication and Encryption (Security Mode 3)
        #auth enable;
        #encrypt enable;

hci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 17, io mem 0xe6000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
input: PC Speaker as /class/input/input4
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 18
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 18, io mem 0xe5800000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb 2-2: USB disconnect, address 2
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 19
intel8x0_measure_ac97_clock: measured 52147 usecs
intel8x0: clocking to 48000
usb 2-2: new full speed USB device using ohci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x200, speed 701kHz
input: ImPS/2 Generic Wheel Mouse as /class/input/input5
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
PPP generic driver version 2.4.2
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
EXT3 FS on sda8, internal journal
NTFS driver 2.1.28 [Flags: R/W MODULE].
NTFS-fs warning (device sda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
NTFS-fs error (device sda1): load_system_files(): Volume is dirty.  Mounting read-only.  Run chkdsk and mount in Windows.
NTFS-fs warning (device sda1): load_system_files(): $LogFile is not clean.  Will not be able to remount read-write.  Mount in Windows.
NTFS-fs warning (device sda5): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
NTFS-fs error (device sda5): load_system_files(): $LogFile is not clean.  Mounting read-only.  Mount in Windows.
Adding 2939852k swap on /dev/sda7.  Priority:-1 extents:1 across:2939852k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
usb 1-2: new full speed USB device using ohci_hcd and address 2
usb 1-2: configuration #1 chosen from 2 choices
cdc_acm 1-2:1.0: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
PPP BSD Compression module registered
PPP Deflate Compression module registered
hci_cmd_task: hci0 command tx timeout
hci_cmd_task: hci0 command tx timeout
hci_cmd_task: hci0 command tx timeout
hci_cmd_task: hci0 command tx timeout
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Bluetooth: HIDP (Human Interface Emulation) ver 1.2

#
# RFCOMM configuration file.
#
rfcomm0 {
        # Automatically bind the device at startup
        bind yes;
        # Bluetooth address of the device
        device 00:1C:12:BC:21:F9;
        # RFCOMM channel for the connection
        channel 1;
        # Description of the connection
        comment "Example Bluetooth device";
}

Device is not available: No such device

[root@myhost murat]# rfcomm connect rfcomm0 00:1C:12:BC:21:F9 1
Can't connect RFCOMM socket: Permission denied
[root@myhost murat]#