kde 4.5

Приветы

Интересно, почему не торопятся кде 4.5 в и когда можно ожидать?
Вот тоже жду с нетерпением, 4.5 реально приятно пользоваться
для задержки есть причины :)
У меня на чакре обновилось уже как пару дней. Все было нормально кроме того, что непомук вываливал ошибку при запуске и не открывались настройки стилей/цветов =)
Сейчас обновил ядро и кде-коре. Эти баги пофиксились, но теперь через меню (ланцелот) и краннер не запускаются qt приложения. gtk-шные запускаются.
Любые запускаются через терминал, также при старте системы они тоже запускаются (из предыдущей сессии или через автозапуск).
В терминале ругань типа
[[email protected] ~]$ plasma-desktop
<unknown program name>(3510)/ kdemain: !!{} STARTUP TIME 37556072 START (line: 48 )
QDBusObjectPath: invalid path ""
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
plasma-desktop(3511)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(-13, -10) 
plasma-desktop(3511)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(-13, -10) 
plasma-desktop(3511)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(-13, -10) 
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
ERROR from solid predicate parser: syntax error
ERROR from solid predicate parser: syntax error
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setRenderHint: Painter must be active to set rendering hints
QPainter::setPen: Painter not active
QPainter::setFont: Painter not active
Couldn't find node center. Skipping rendering.
Couldn't find node center. Skipping rendering.
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
Invalid D-BUS interface name 'org.kde.plasma-desktop.PlasmaApp' found while parsing introspection
QPainter::begin: Paint device returned engine == 0, type: 2
QPainter::setRenderHint: Painter must be active to set rendering hints
QPainter::setPen: Painter not active
QPainter::setFont: Painter not active
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QDBusConnection: name 'org.socketsentry.Watcher' had owner '' but we thought it was ':1.33'
Couldn't find node center. Skipping rendering.
[[email protected] ~]$ QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QFont::setPointSize: Point size <= 0 (0), must be greater than 0
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
Couldn't find node center. Skipping rendering.
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
QWidget::setMinimumSize: (/Plasma::Dialog) Negative sizes (-1,-1) are not possible
setting locale to  "uk"  and encoding to  "utf8" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
error running command on input data:  "/bin/sh: warning: setlocale: LC_ALL: cannot change locale (uk)
" 
data_location_location:  "" 
data_location_country:  "" 
data_sun_sunrise:  "05:53" 
data_sun_sunset:  "20:51" 
data_provider_update_time:  "7:00" 
data_current_temperature:  "9" 
data_current_temperature_felt:  "" 
data_current_wind_code:  "S" 
data_current_wind_speed:  "1 м/с" 
data_current_wind:  "Ю - 1 м/с" 
data_current_icon_code:  32 
data_current_icon_text:  "Ясно" 
data_current_humidity:  "95%" 
data_current_rain:  "" 
data_current_dew_point:  "" 
data_current_visibility:  "" 
data_current_pressure:  "746мм рт.ст." 
data_current_uv_index:  "" 
data_day_name[ 0 ]:  "ВС" 
data_day_temperature_high[ 0 ]:  "15" 
data_day_temperature_low[ 0 ]:  "11" 
data_day_icon_code[ 0 ]:  40 
data_day_icon_text[ 0 ]:  "Пасмурно, сильный дождь" 
data_day_name[ 1 ]:  "ПН" 
data_day_temperature_high[ 1 ]:  "22" 
data_day_temperature_low[ 1 ]:  "14" 
data_day_icon_code[ 1 ]:  38 
data_day_icon_text[ 1 ]:  "Малооблачно, небольшой дождь, гроза" 
data_day_name[ 2 ]:  "ВТ" 
data_day_temperature_high[ 2 ]:  "22" 
data_day_temperature_low[ 2 ]:  "13" 
data_day_icon_code[ 2 ]:  39 
data_day_icon_text[ 2 ]:  "Малооблачно, небольшой дождь" 
data_day_name[ 3 ]:  "СР" 
data_day_temperature_high[ 3 ]:  "20" 
data_day_temperature_low[ 3 ]:  "13" 
data_day_icon_code[ 3 ]:  0 
data_day_icon_text[ 3 ]:  "Малооблачно, дождь, гроза" 
data_day_name[ 4 ]:  "ЧТ" 
data_day_temperature_high[ 4 ]:  "21" 
data_day_temperature_low[ 4 ]:  "12" 
data_day_icon_code[ 4 ]:  38 
data_day_icon_text[ 4 ]:  "Малооблачно, небольшой дождь, гроза" 
data_day_name[ 5 ]:  "ПТ" 
data_day_temperature_high[ 5 ]:  "14" 
data_day_temperature_low[ 5 ]:  "10" 
data_day_icon_code[ 5 ]:  40 
data_day_icon_text[ 5 ]:  "Пасмурно, дождь" 
data_day_name[ 6 ]:  "СБ" 
data_day_temperature_high[ 6 ]:  "13" 
data_day_temperature_low[ 6 ]:  "7" 
data_day_icon_code[ 6 ]:  30 
data_day_icon_text[ 6 ]:  "Облачно" 
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x3a09796
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x3a09796
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x3a09796
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x3a00034
X Error: BadWindow (invalid Window parameter) 3
  Major opcode: 20 (X_GetProperty)
  Resource id:  0x3a00034
[[email protected] ~]$ krunner
krunner(4081)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know "/home/dm/.kdemod4/share/apps/kabc" 
ERROR from solid predicate parser: syntax error
ERROR from solid predicate parser: syntax error
I/O warning : failed to load external entity "/home/dm/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/dm/.qalculate/eurofxref-daily.xml"
krunner(4081)/libplasma Plasma::Package::isValid: Could not find required file mainscript , look in "/home/dm/contents/code/main" 
Кстати, все баги прошли сами. Позапускал программы из терминала, перезагрузился.
Все довольно неплохо. Наворотил прозрачные окна и еще всякой фигни. Вот только X стал кушать проц и память

ЗЫ: подскажите хороший док под кде4 кроме fancytask. Он коряво анимирован и запущенные приложения имеют 2 иконки (в частности, файрфокс)
Поздравляю всех, кто с нетерпением ждал! kde 4.5 в extra! :)
Жуков ловим? ;)
Смотрика) В кой-то веке кеды стали работать не падая. Единственно, что даже при отключенных спецэффектах отрисовка кдешных окошек притормаживает, хотя теже программы в гноме работают на ура. Ни кто не в курсе, от чего такое может быть?
А у меня наоборот, после обновления Dolpin стал тормозить и иногда вылетает с ошибкой, с Konqueror та же беда :(
Еще таббинг куда-то пропал…
та-да.. обещали оптимизацию и ускорение, а в итоге тормоз… голубой бордюр вообще достал и непонятно как его теперь отключать.

кстати, есть ли возможность установить кде без akonadi,mysql,nepomuk и прочей фигни?
grayich
кстати, есть ли возможность установить кде без akonadi,mysql,nepomuk и прочей фигни?
Тоже думал об этом. Что-то подсказывает мне, что уже нет. И чем дальше, тем глубже. Надеюсь, их не озарит все конфиги от всех приложений держать в БД.
 
Зарегистрироваться или войдите чтобы оставить сообщение.