Как сделать автомонтирование SD карты

# cat /var/log/everything.log

# cat /var/log/dmesg

dmesg

[[email protected] oleg]# dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-ARCH ([email protected]) (gcc version 4.5.1 (GCC) ) #1 SMP PREEMPT Sat Aug 21 07:23:08 UTC 2010
Atom PSE erratum detected, BIOS microcode update recommended
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003f376000 (usable)
 BIOS-e820: 000000003f376000 - 000000003f3bf000 (reserved)
 BIOS-e820: 000000003f3bf000 - 000000003f46d000 (usable)
 BIOS-e820: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
 BIOS-e820: 000000003f4bf000 - 000000003f4f0000 (usable)
 BIOS-e820: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
 BIOS-e820: 000000003f4ff000 - 000000003f500000 (usable)
 BIOS-e820: 000000003f500000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x3f500 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-EFFFF uncachable
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0FFFE0000 mask 0FFFE0000 write-protect
  1 base 0FFFC0000 mask 0FFFE0000 uncachable
  2 base 000000000 mask 0E0000000 write-back
  3 base 020000000 mask 0E0000000 write-back
  4 base 03F800000 mask 0FF800000 uncachable
  5 base 03F600000 mask 0FFE00000 uncachable
  6 base 03F500000 mask 0FFF00000 uncachable
  7 base 000000000 mask 0FFFE0000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
 modified: 0000000000000000 - 0000000000001000 (reserved)
 modified: 0000000000001000 - 0000000000002000 (usable)
 modified: 0000000000002000 - 0000000000010000 (reserved)
 modified: 0000000000010000 - 000000000009fc00 (usable)
 modified: 000000000009fc00 - 00000000000a0000 (reserved)
 modified: 00000000000e0000 - 0000000000100000 (reserved)
 modified: 0000000000100000 - 000000003f376000 (usable)
 modified: 000000003f376000 - 000000003f3bf000 (reserved)
 modified: 000000003f3bf000 - 000000003f46d000 (usable)
 modified: 000000003f46d000 - 000000003f4bf000 (ACPI NVS)
 modified: 000000003f4bf000 - 000000003f4f0000 (usable)
 modified: 000000003f4f0000 - 000000003f4ff000 (ACPI data)
 modified: 000000003f4ff000 - 000000003f500000 (usable)
 modified: 000000003f500000 - 0000000040000000 (reserved)
 modified: 00000000e0000000 - 00000000f0000000 (reserved)
 modified: 00000000fec00000 - 00000000fec01000 (reserved)
 modified: 00000000fed14000 - 00000000fed1a000 (reserved)
 modified: 00000000fed1c000 - 00000000fed20000 (reserved)
 modified: 00000000fee00000 - 00000000fee01000 (reserved)
 modified: 00000000fff00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 100000-1e1000
RAMDISK: 3f1e3000 - 3f366000
Allocated new RAMDISK: 001d8000 - 0035a5d8
Move RAMDISK from 000000003f1e3000 - 000000003f3655d7 to 001d8000 - 0035a5d7
ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 3f4fe120 00064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
ACPI: FACP 3f4fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: DSDT 3f4f2000 05DE6 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: FACS 3f488000 00040
ACPI: SSDT 3f4fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: HPET 3f4fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: APIC 3f4fa000 00068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: MCFG 3f4f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: ASF! 3f4f8000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SLIC 3f4f1000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: BOOT 3f4f0000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: Local APIC address 0xfee00000
125MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0003f500
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
    0: 0x00000001 -> 0x00000002
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003f376
    0: 0x0003f3bf -> 0x0003f46d
    0: 0x0003f4bf -> 0x0003f4f0
    0: 0x0003f4ff -> 0x0003f500
On node 0 totalpages: 259046
free_area_init_node: node 0, pgdat c1418a40, node_mem_map c157b020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3952 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 251 pages used for memmap
  HighMem zone: 31581 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [15000 - 157ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1d70000 s34880 r0 d22464 u65536
pcpu-alloc: s34880 r0 d22464 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257019
Kernel command line: root=/dev/disk/by-uuid/746ba898-fa4a-437a-b392-344373a9235b ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5186540 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (53 early reservations)
  #1 [0000001000 - 0000002000]   EX TRAMPOLINE
  #2 [0001000000 - 0001572184]   TEXT DATA BSS
  #3 [000009fc00 - 0000100000]   BIOS reserved
  #4 [0001573000 - 0001579244]             BRK
  #5 [0000010000 - 0000011000]      TRAMPOLINE
  #6 [0000011000 - 0000015000]     ACPI WAKEUP
  #7 [0000100000 - 00001d8000]         PGTABLE
  #8 [00001d8000 - 000035b000]     NEW RAMDISK
  #9 [000157a000 - 000157b000]         BOOTMEM
  #10 [000157b000 - 0001d6b000]         BOOTMEM
  #11 [00015721c0 - 00015721c4]         BOOTMEM
  #12 [0001572200 - 00015722c0]         BOOTMEM
  #13 [00015722c0 - 0001572314]         BOOTMEM
  #14 [0001d6b000 - 0001d6e000]         BOOTMEM
  #15 [0001572340 - 000157234c]         BOOTMEM
  #16 [0001572380 - 0001572980]         BOOTMEM
  #17 [0001572980 - 00015729a5]         BOOTMEM
  #18 [00015729c0 - 00015729e7]         BOOTMEM
  #19 [0001572a00 - 0001572c30]         BOOTMEM
  #20 [0001572c40 - 0001572c80]         BOOTMEM
  #21 [0001572c80 - 0001572cc0]         BOOTMEM
  #22 [0001572cc0 - 0001572d00]         BOOTMEM
  #23 [0001572d00 - 0001572d40]         BOOTMEM
  #24 [0001572d40 - 0001572d80]         BOOTMEM
  #25 [0001572d80 - 0001572dc0]         BOOTMEM
  #26 [0001572dc0 - 0001572e00]         BOOTMEM
  #27 [0001572e00 - 0001572e40]         BOOTMEM
  #28 [0001572e40 - 0001572e80]         BOOTMEM
  #29 [0001572e80 - 0001572ec0]         BOOTMEM
  #30 [0001572ec0 - 0001572f00]         BOOTMEM
  #31 [0001572f00 - 0001572f40]         BOOTMEM
  #32 [0001572f40 - 0001572f80]         BOOTMEM
  #33 [0001572f80 - 0001572fc0]         BOOTMEM
  #34 [0001572fc0 - 0001573000]         BOOTMEM
  #35 [0001579280 - 00015792c0]         BOOTMEM
  #36 [00015792c0 - 0001579300]         BOOTMEM
  #37 [0001579300 - 0001579310]         BOOTMEM
  #38 [0001579340 - 0001579350]         BOOTMEM
  #39 [0001579380 - 00015793bf]         BOOTMEM
  #40 [00015793c0 - 00015793ff]         BOOTMEM
  #41 [0001d70000 - 0001d7e000]         BOOTMEM
  #42 [0001d80000 - 0001d8e000]         BOOTMEM
  #43 [0001579400 - 0001579404]         BOOTMEM
  #44 [0001579440 - 0001579444]         BOOTMEM
  #45 [0001579480 - 0001579488]         BOOTMEM
  #46 [00015794c0 - 00015794c8]         BOOTMEM
  #47 [0001579500 - 0001579580]         BOOTMEM
  #48 [0001579580 - 00015795ac]         BOOTMEM
  #49 [0001d8e000 - 0001d92000]         BOOTMEM
  #50 [0001d92000 - 0001e12000]         BOOTMEM
  #51 [0001e12000 - 0001e52000]         BOOTMEM
  #52 [0001e52000 - 00023443ec]         BOOTMEM
Initializing HighMem for node 0 (000377fe:0003f500)
Memory: 1014032k/1037312k available (2983k kernel code, 22152k reserved, 1240k data, 412k init, 127328k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc1421000 - 0xc1488000   ( 412 kB)
      .data : 0xc12e9f8c - 0xc14202c0   (1240 kB)
      .text : 0xc1000000 - 0xc12e9f8c   (2983 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
        RCU-based detection of stalled CPUs is disabled.
        Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1595.980 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.95 BogoMIPS (lpj=5319933)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Atom PSE erratum detected, BIOS microcode update recommended
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
ACPI: Core revision 20100428
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270   @ 1.60GHz stepping 02
Booting Node   0, Processors  #1 Ok.
Initializing CPU#1
Atom PSE erratum detected, BIOS microcode update recommended
Brought up 2 CPUs
Total of 2 processors activated (6386.94 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 3f380c90 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00239 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 3f37fe10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 3f380f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 3f37ef10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
pci 0000:00:02.0: reg 10: [mem 0x58480000-0x584fffff]
pci 0000:00:02.0: reg 14: [io  0x60c0-0x60c7]
pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0x58500000-0x5853ffff]
pci 0000:00:02.1: reg 10: [mem 0x58400000-0x5847ffff]
pci 0000:00:1b.0: reg 10: [mem 0x58540000-0x58543fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x6080-0x609f]
pci 0000:00:1d.1: reg 20: [io  0x6060-0x607f]
pci 0000:00:1d.2: reg 20: [io  0x6040-0x605f]
pci 0000:00:1d.3: reg 20: [io  0x6020-0x603f]
pci 0000:00:1d.7: reg 10: [mem 0x58544400-0x585447ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.2: reg 20: [io  0x60a0-0x60af]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0x57300000-0x583fffff]
pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
pci 0000:02:00.0: reg 10: [io  0x3000-0x30ff]
pci 0000:02:00.0: reg 18: [mem 0x51010000-0x51010fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0x51000000-0x5100ffff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0x56300000-0x572fffff]
pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x520fffff 64bit pref]
pci 0000:03:00.0: reg 10: [mem 0x55200000-0x5520ffff 64bit]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2:   bridge window [mem 0x55200000-0x562fffff]
pci 0000:00:1c.2:   bridge window [mem 0x52100000-0x530fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.3:   bridge window [mem 0x54100000-0x551fffff]
pci 0000:00:1c.3:   bridge window [mem 0x53100000-0x540fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
HEST: Table is not found!
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000002000 - 000000000000ffff 
reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
reserve RAM buffer: 000000003f376000 - 000000003fffffff 
reserve RAM buffer: 000000003f46d000 - 000000003fffffff 
reserve RAM buffer: 000000003f4f0000 - 000000003fffffff 
reserve RAM buffer: 000000003f500000 - 000000003fffffff 
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter

Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x0200-0x020f] has been reserved
system 00:01: [io  0x0600-0x060f] has been reserved
system 00:01: [io  0x0610] has been reserved
system 00:01: [io  0x0800-0x080f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0500-0x053f] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
pci 0000:02:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.0:   bridge window [mem 0x57300000-0x583fffff]
pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
pci 0000:02:00.0: BAR 6: assigned [mem 0x51020000-0x5103ffff pref]
pci 0000:00:1c.1: PCI bridge to [bus 02-02]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x4fff]
pci 0000:00:1c.1:   bridge window [mem 0x56300000-0x572fffff]
pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x520fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03-03]
pci 0000:00:1c.2:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.2:   bridge window [mem 0x55200000-0x562fffff]
pci 0000:00:1c.2:   bridge window [mem 0x52100000-0x530fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04-04]
pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.3:   bridge window [mem 0x54100000-0x551fffff]
pci 0000:00:1c.3:   bridge window [mem 0x53100000-0x540fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 05-05]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0x57300000-0x583fffff]
pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x3000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0x56300000-0x572fffff]
pci_bus 0000:02: resource 2 [mem 0x51000000-0x520fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0x55200000-0x562fffff]
pci_bus 0000:03: resource 2 [mem 0x52100000-0x530fffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:04: resource 1 [mem 0x54100000-0x551fffff]
pci_bus 0000:04: resource 2 [mem 0x53100000-0x540fffff 64bit pref]
pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1548k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1283074103.366:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1734
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 412k freed
udev: starting version 161
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_acpi 0000:00:1f.2: setting latency timer to 64
pata_acpi 0000:00:1f.2: PCI INT B disabled
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
ata1.00: ATA-8: TOSHIBA MK1652GSX, LV020J, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1652GS LV02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
udev: starting version 161
input: PC Speaker as /devices/platform/pcspkr/input/input1
acerhdf: Acer Aspire One Fan driver, v.0.5.22
acerhdf: Fan control off, to enable do:
acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
intel_rng: FWH not detected
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
Linux agpgart interface v0.103
iTCO_vendor_support: vendor-support=0
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: AC Adapter [ACAD] (on-line)
Switching to clocksource hpet
ACPI: WMI: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 44 for MSI/MSI-X
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
r8169 0000:02:00.0: eth0: RTL8102e at 0xf86de000, 00:23:8b:67:cf:79, XID 04a00000 IRQ 44
ACPI: Battery Slot [BAT1] (battery present)
usbcore: registered new device driver usb
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
leds_ss4200: no LED devices found
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58544400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
cfg80211: Calling CRDA to update world regulatory domain
[drm] Initialized drm 1.1.0 20060810
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-1: new high speed USB device using ehci_hcd and address 2
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: no more MTRRs available
[drm] MTRR allocation failed.  Graphics performance may suffer.
ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ath5k 0000:03:00.0: setting latency timer to 64
ath5k 0000:03:00.0: registered as 'phy0'
[drm] set up 7M of stolen space
Initializing USB Mass Storage driver...
scsi2 : usb-storage 1-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb 1-5: new high speed USB device using ehci_hcd and address 4
[drm:drm_edid_block_valid] *ERROR* EDID has major version 0, instead of 1
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 4c a3 01 00 00 00 00 00  ........L.......
<3>00 12 00 01 80 a2 66 78 0a 50 85 98 58 52 8e 26  ......fx.P..XR.&
<3>25 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01  %PT.............
<3>01 01 01 01 01 01 98 12 00 f0 40 58 1b 20 10 05  [email protected] ..
<3>35 00 c3 71 00 00 00 19 00 00 00 fe 00 53 41 4d  5..q.........SAM
<3>53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe 00 53  SUNG.     .....S
<3>41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fc  AMSUNG.     ....
<3>00 53 41 4d 53 55 4e 47 2d 4c 43 44 2d 2d 00 51  .SAMSUNG-LCD--.Q
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04771/0xa40000/0xa0000
[drm:drm_edid_block_valid] *ERROR* EDID has major version 0, instead of 1
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 4c a3 01 00 00 00 00 00  ........L.......
<3>00 12 00 01 80 a2 66 78 0a 50 85 98 58 52 8e 26  ......fx.P..XR.&
<3>25 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01  %PT.............
<3>01 01 01 01 01 01 98 12 00 f0 40 58 1b 20 10 05  [email protected] ..
<3>35 00 c3 71 00 00 00 19 00 00 00 fe 00 53 41 4d  5..q.........SAM
<3>53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe 00 53  SUNG.     .....S
<3>41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fc  AMSUNG.     ....
<3>00 53 41 4d 53 55 4e 47 2d 4c 43 44 2d 2d 00 51  .SAMSUNG-LCD--.Q
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[drm:drm_edid_block_valid] *ERROR* EDID has major version 0, instead of 1
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 4c a3 01 00 00 00 00 00  ........L.......
<3>00 12 00 01 80 a2 66 78 0a 50 85 98 58 52 8e 26  ......fx.P..XR.&
<3>25 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01  %PT.............
<3>01 01 01 01 01 01 98 12 00 f0 40 58 1b 20 10 05  [email protected] ..
<3>35 00 c3 71 00 00 00 19 00 00 00 fe 00 53 41 4d  5..q.........SAM
<3>53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe 00 53  SUNG.     .....S
<3>41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fc  AMSUNG.     ....
<3>00 53 41 4d 53 55 4e 47 2d 4c 43 44 2d 2d 00 51  .SAMSUNG-LCD--.Q
[drm:drm_edid_block_valid] *ERROR* EDID has major version 0, instead of 1
[drm:drm_edid_block_valid] *ERROR* Raw EDID:
<3>00 ff ff ff ff ff ff 00 4c a3 01 00 00 00 00 00  ........L.......
<3>00 12 00 01 80 a2 66 78 0a 50 85 98 58 52 8e 26  ......fx.P..XR.&
<3>25 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01  %PT.............
<3>01 01 01 01 01 01 98 12 00 f0 40 58 1b 20 10 05  [email protected] ..
<3>35 00 c3 71 00 00 00 19 00 00 00 fe 00 53 41 4d  5..q.........SAM
<3>53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe 00 53  SUNG.     .....S
<3>41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fc  AMSUNG.     ....
<3>00 53 41 4d 53 55 4e 47 2d 4c 43 44 2d 2d 00 51  .SAMSUNG-LCD--.Q
i915 0000:00:02.0: LVDS-1: EDID block 0 invalid.
[drm] initialized overlay support
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
usb 3-1: new low speed USB device using uhci_hcd and address 2
phy0: Selected rate control algorithm 'minstrel'
Registered led device: ath5k-phy0::rx
Registered led device: ath5k-phy0::tx
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 15679488 512-byte logical blocks: (8.02 GB/7.47 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb4
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.1-1/input0
Console: switching to colour frame buffer device 128x37
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
Adding 1052252k swap on /dev/sda2.  Priority:-1 extents:1 across:1052252k 
r8169 0000:02:00.0: eth0: link down
ata1.00: configured for UDMA/100
ata1: EH complete
EXT4-fs (sda3): re-mounted. Opts: commit=0
EXT4-fs (sda4): re-mounted. Opts: commit=0
fuse init (API version 7.14)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready