Проблема с выключением ноутбука

vasek	# 5 лет, 3 месяца назад
Темы: 48 Сообщения: 11320 Участник с: 17 февраля 2013	Не понял одно - это появилось после какого то обновления или было с самого начала. Если с самого начала, то можно было бы попробовать обновить BIOS, но у тебя UEFI - а как это зависит, даже не знаю. Если после обновления, то есть надежда, что со временем пройдет, после какого-нибудь обновления. А так, конечно, одни гадания. Ошибки не исчезают с опытом - они просто умнеют

# 5 лет, 3 месяца назад

Сообщения: 11320

Участник с: 17 февраля 2013

Не понял одно - это появилось после какого то обновления или было с самого начала.
Если с самого начала, то можно было бы попробовать обновить BIOS, но у тебя UEFI - а как это зависит, даже не знаю.
Если после обновления, то есть надежда, что со временем пройдет, после какого-нибудь обновления.
А так, конечно, одни гадания.

Ошибки не исчезают с опытом - они просто умнеют

RusWolf	# 5 лет, 3 месяца назад
Темы: 11 Сообщения: 2394 Участник с: 16 июля 2016	vasek Не понял одно - это появилось после какого то обновления или было с самого начала. С самого начала, надеялся, что после установки всех драйверов и пакетов пройдет, но не прошло. vasek Если с самого начала, то можно было бы попробовать обновить BIOS, но у тебя UEFI - а как это зависит, даже не знаю. Как раз сейчас копаю в этом направление.

RusWolf

# 5 лет, 3 месяца назад

Темы: 11

Сообщения: 2394

Участник с: 16 июля 2016

vasek
Не понял одно - это появилось после какого то обновления или было с самого начала.

С самого начала, надеялся, что после установки всех драйверов и пакетов пройдет, но не прошло.

vasek
Если с самого начала, то можно было бы попробовать обновить BIOS, но у тебя UEFI - а как это зависит, даже не знаю.

Как раз сейчас копаю в этом направление.

RusWolf	# 5 лет, 3 месяца назад
Темы: 11 Сообщения: 2394 Участник с: 16 июля 2016	Замена UEFI прошивки на более свежую версию, не помогла, проблема с выключением ноута осталась :(

toZen	# 5 лет, 3 месяца назад
Темы: 19 Сообщения: 544 Участник с: 06 февраля 2015	RusWolf есть только один Wake-on-LAN Wake-on-Lan пробовали отключить?

indeviral	# 5 лет, 3 месяца назад (отредактировано 5 лет, 3 месяца назад)
Темы: 38 Сообщения: 3165 Участник с: 10 августа 2013	есть ещё один способ выключить о котором умолчал vasek, если у вас стандартное ядро из нашего репозитория это `# echo o > /proc/sysrq-trigger` Ну это так ради эксперимента... в повседневности так лучше не делать. Ошибки в тексте-неповторимый стиль автора©

indeviral

# 5 лет, 3 месяца назад (отредактировано 5 лет, 3 месяца назад)

Темы: 38

Сообщения: 3165

Участник с: 10 августа 2013

есть ещё один способ выключить о котором умолчал vasek, если у вас стандартное ядро из нашего репозитория это

# echo o > /proc/sysrq-trigger

Ну это так ради эксперимента... в повседневности так лучше не делать.

Ошибки в тексте-неповторимый стиль автора©

RusWolf	# 5 лет, 3 месяца назад
Темы: 11 Сообщения: 2394 Участник с: 16 июля 2016	toZen Wake-on-Lan пробовали отключить? По умолчанию, сразу отключён. indeviral Ну это так ради эксперимента... в повседневности так лучше не делать. Делал и так :) Выключается и через 5 секунд всё равно включается.

RusWolf

# 5 лет, 3 месяца назад

Темы: 11

Сообщения: 2394

Участник с: 16 июля 2016

toZen
Wake-on-Lan пробовали отключить?

По умолчанию, сразу отключён.

indeviral
Ну это так ради эксперимента... в повседневности так лучше не делать.

Делал и так :) Выключается и через 5 секунд всё равно включается.

vasek	# 5 лет, 3 месяца назад (отредактировано 5 лет, 3 месяца назад)
Темы: 48 Сообщения: 11320 Участник с: 17 февраля 2013	RusWolf Делал и так :) Выключается и через 5 секунд всё равно включается. А нет ли в BIOS/EFI опции типа After Power Failure? - действия ноута после сбоя питания. PS ... Можно посмотреть, есть ли проблемы с ACPI, например, просто посмотреть сообщения dmesg \| grep -2i acpi dmesg \| grep -2i Firmware Лучше, конечно, выполнить debug ACPI (если причина в нем), но это морока - нужно собирать ядро с определенными опциями. PSS ... во FREEBSD прописана такая штука Система включается после приостановки или завершения работы Во-первых, попробуйте установить в loader.conf(5) параметр hw.acpi.disable_on_poweroff="0". Это предотвращает отключение различных событий в ACPI во время завершения работы. В некоторых системах этот параметр необходимо установить в 1 (по умолчанию) по тем же причинам. Обычно это решает проблему, если система неожиданно включается после приостановки или отключения питания. Сам это никогда не пробовал и, вдобавок, нужно еще подумать, как это приспособить к нам .... Ошибки не исчезают с опытом - они просто умнеют

vasek

# 5 лет, 3 месяца назад (отредактировано 5 лет, 3 месяца назад)

Темы: 48

Сообщения: 11320

Участник с: 17 февраля 2013

RusWolf
Делал и так :) Выключается и через 5 секунд всё равно включается.

А нет ли в BIOS/EFI опции типа After Power Failure? - действия ноута после сбоя питания.
PS ... Можно посмотреть, есть ли проблемы с ACPI, например, просто посмотреть сообщения
dmesg | grep -2i acpi
dmesg | grep -2i Firmware
Лучше, конечно, выполнить debug ACPI (если причина в нем), но это морока - нужно собирать ядро с определенными опциями.

PSS ... во FREEBSD прописана такая штука

Система включается после приостановки или завершения работы
Во-первых, попробуйте установить в loader.conf(5) параметр hw.acpi.disable_on_poweroff="0". Это предотвращает отключение различных событий в ACPI во время завершения работы. В некоторых системах этот параметр необходимо установить в 1 (по умолчанию) по тем же причинам. Обычно это решает проблему, если система неожиданно включается после приостановки или отключения питания.

Сам это никогда не пробовал и, вдобавок, нужно еще подумать, как это приспособить к нам ....

Ошибки не исчезают с опытом - они просто умнеют

RusWolf	# 5 лет, 3 месяца назад
Темы: 11 Сообщения: 2394 Участник с: 16 июля 2016	vasek А нет ли в BIOS/EFI опции типа After Power Failure? - действия ноута после сбоя питания. Не, такой нет опции, UEFI в ноуте вообще очень, скудный, опций для настроек как кот наплакал. [wolf@arch-netbook ~]$ dmesg \| grep -2i acpi [ 0.000000] BIOS-e820: [mem 0x00000000c41ff000-0x00000000c43fefff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000c43ff000-0x00000000c6eeefff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000c6eef000-0x00000000c6f9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000c6f9f000-0x00000000c6ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000c6fff000-0x00000000c6ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000c7000000-0x00000000cf9fffff] reserved -- [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd. [ 0.000000] efi: ACPI=0xc6ffe000 ACPI 2.0=0xc6ffe014 SMBIOS=0xc6e8a000 [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem46: [Reserved \| \| \| \| \| \| \| \| \| \| \| \| ] range=[0x0000000000000000-0x0000000000000000] (invalid) -- [ 0.000000] Secure boot could not be determined [ 0.000000] RAMDISK: [mem 0x3748d000-0x37a3dfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000C6FFE014 000024 (v02 ACRSYS) [ 0.000000] ACPI: XSDT 0x00000000C6FFE170 0000B4 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: FACP 0x00000000C6FEC000 00010C (v05 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: DSDT 0x00000000C6FEF000 00C539 (v02 ACRSYS IVB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 0x00000000C6F7C000 000040 [ 0.000000] ACPI: SLIC 0x00000000C6FFD000 000176 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: SSDT 0x00000000C6FFC000 0001F9 (v01 ACRSYS PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 0x00000000C6FEE000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: HPET 0x00000000C6FEB000 000038 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: APIC 0x00000000C6FEA000 000098 (v03 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: MCFG 0x00000000C6FE9000 00003C (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: WPBT 0x00000000C6FDA000 000046 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: FPDT 0x00000000C6FD9000 000064 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: SSDT 0x00000000C6FD8000 000758 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 0x00000000C6FD7000 000B22 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000C6FD6000 00003E (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: UEFI 0x00000000C6FD5000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: MSDM 0x00000000C6F79000 000055 (v03 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: SSDT 0x00000000C6FD4000 000C64 (v01 NvORef NvOptTbl 00001000 INTL 20061109) [ 0.000000] ACPI: UEFI 0x00000000C6FD3000 00026A (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: BGRT 0x00000000C6FD2000 000038 (v00 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: DBG2 0x00000000C6FD1000 0000B4 (v00 ACRSYS ACRPRDCT 00000001 ANNI 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012f5fffff] -- [ 0.000000] Normal zone: 194048 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x00000000c7a00000-0x00000000cf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] -- [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.64 BogoMIPS (lpj=1396820) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] ACPI: Core revision 20170119 [ 0.014370] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.015206] Security Framework initialized [ 0.015209] Yama: becoming mindful. -- [ 0.243426] devtmpfs: initialized [ 0.243521] x86/mm: Memory block size: 128MB [ 0.247761] PM: Registering ACPI NVS region [mem 0xc6eef000-0xc6f9efff] (720896 bytes) [ 0.247846] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.247864] futex hash table entries: 2048 (order: 5, 131072 bytes) -- [ 0.249127] cpuidle: using governor menu [ 0.249130] PCCT header not found. [ 0.249163] ACPI: bus type PCI registered [ 0.249165] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.249256] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.249280] PCI: not using MMCONFIG -- [ 0.249334] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.250548] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.250891] ACPI: Added _OSI(Module Device) [ 0.250892] ACPI: Added _OSI(Processor Device) [ 0.250893] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.250895] ACPI: Added _OSI(Processor Aggregator Device) [ 0.251179] ACPI: Executed 1 blocks of module-level executable AML code [ 0.264920] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.265538] ACPI: Dynamic OEM Table Load: [ 0.265553] ACPI: SSDT 0xFFFF880129E5F000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.266101] ACPI: Dynamic OEM Table Load: [ 0.266113] ACPI: SSDT 0xFFFF880129EAE800 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.266505] ACPI: Dynamic OEM Table Load: [ 0.266514] ACPI: SSDT 0xFFFF880129E94400 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.267728] ACPI : EC: EC started [ 0.267730] ACPI : EC: interrupt blocked [ 0.272224] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.272227] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.272230] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.272231] ACPI: Interpreter enabled [ 0.272268] ACPI: (supports S0 S3 S4 S5) [ 0.272270] ACPI: Using IOAPIC for interrupt routing [ 0.272307] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.272953] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources [ 0.272966] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.282655] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.282662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.282858] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.283416] PCI host bridge to bus 0000:00 [ 0.283420] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] -- [ 0.283608] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.283661] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.283731] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.283792] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.283807] pci 0000:00:02.0: reg 0x10: [mem 0xf3400000-0xf37fffff 64bit] -- [ 0.284188] pci 0000:00:14.0: reg 0x10: [mem 0xf3b00000-0xf3b0ffff 64bit] [ 0.284315] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.284390] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.284446] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.284481] pci 0000:00:16.0: reg 0x10: [mem 0xf3b15000-0xf3b1500f 64bit] -- [ 0.284772] pci 0000:00:1a.0: reg 0x10: [mem 0xf3b1a000-0xf3b1a3ff] [ 0.284915] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.285009] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.285071] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.285103] pci 0000:00:1b.0: reg 0x10: [mem 0xf3b10000-0xf3b13fff 64bit] [ 0.285257] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.285339] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.285395] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.285535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.285616] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.285671] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.285811] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.285889] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.285943] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.286083] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.286175] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.286239] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.286269] pci 0000:00:1d.0: reg 0x10: [mem 0xf3b19000-0xf3b193ff] [ 0.286415] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.286509] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.286565] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100 [ 0.286837] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 -- [ 0.287499] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f] [ 0.287510] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref] [ 0.287731] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.290194] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.290200] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] -- [ 0.291286] pci 0000:03:00.0: supports D1 D2 [ 0.291288] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.291458] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.291578] pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000 [ 0.291667] pci 0000:03:00.2: reg 0x10: [io 0x2000-0x20ff] -- [ 0.295866] pci 0000:04:00.0: supports D1 D2 [ 0.295867] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.295942] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.298251] pci 0000:00:1c.3: PCI bridge to [bus 04] [ 0.298265] pci 0000:00:1c.3: bridge window [mem 0xf3900000-0xf39fffff] [ 0.299080] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299164] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299342] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299423] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299506] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299586] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299665] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.299926] ACPI: Enabled 3 GPEs in block 00 to 3F [ 0.300020] ACPI : EC: interrupt unblocked [ 0.300028] ACPI : EC: event unblocked [ 0.300035] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.300038] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.300178] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.300182] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none -- [ 0.300195] vgaarb: loaded [ 0.300278] Registered efivars operations [ 0.307006] PCI: Using ACPI for IRQ routing [ 0.309158] PCI: pci_cache_line_size set to 64 bytes [ 0.309248] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] -- [ 0.325164] VFS: Disk quotas dquot_6.6.0 [ 0.325197] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.325312] pnp: PnP ACPI init [ 0.325519] system 00:00: [io 0x1000-0x100f] has been reserved [ 0.325522] system 00:00: [io 0xffff] has been reserved -- [ 0.325532] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.325536] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved [ 0.325542] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.325604] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.325691] system 00:02: [io 0x0454-0x0457] has been reserved [ 0.325695] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.325797] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.325828] pnp 00:04: Plug and Play ACPI device, IDs ETD0504 PNP0f13 (active) [ 0.325974] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref] [ 0.325980] pnp 00:05: disabling [mem 0xfffff000-0xffffffff disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref] -- [ 0.326034] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.326036] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.326040] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.326433] system 00:06: [mem 0x20000000-0x201fffff] has been reserved [ 0.326435] system 00:06: [mem 0x40000000-0x401fffff] has been reserved [ 0.326439] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.326474] pnp: PnP ACPI: found 7 devices [ 0.333403] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.333410] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window [ 0.333413] pci 0000:04:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window -- [ 0.625004] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.636823] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25 [ 0.637626] ACPI: bus type USB registered [ 0.637663] usbcore: registered new interface driver usbfs [ 0.637676] usbcore: registered new interface driver hub -- [ 6.432903] VBoxNetFlt: Successfully started. [ 6.927960] systemd-journald[192]: Received request to flush runtime journal from PID 1 [ 7.675664] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170119/utaddress-247) [ 7.675675] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.675679] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247) [ 7.675685] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170119/utaddress-247) [ 7.675691] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.675692] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247) [ 7.675697] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170119/utaddress-247) [ 7.675702] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.675703] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247) [ 7.675708] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170119/utaddress-247) [ 7.675713] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 7.675714] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 7.708979] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 7.708986] ACPI: Lid Switch [LID0] [ 7.709133] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3 [ 7.709141] ACPI: Sleep Button [SLPB] [ 7.709238] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 7.709243] ACPI: Power Button [PWRF] [ 7.837640] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 7.927976] ACPI: Battery Slot [BAT0] (battery present) [ 7.947191] ACPI: AC Adapter [ADP1] (off-line) [ 8.022077] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 8.022359] thermal LNXTHERM:00: registered as thermal_zone0 [ 8.022363] ACPI: Thermal Zone [TZS0] (51 C) [ 8.023108] thermal LNXTHERM:01: registered as thermal_zone1 [ 8.023113] ACPI: Thermal Zone [TZS1] (41 C) [ 8.081256] wmi: Mapper loaded [ 8.382040] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt -- [ 10.119627] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem [ 10.126185] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 10.142518] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95) [ 10.142812] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95) [ 10.143041] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power, [ 10.143229] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95) [ 10.143715] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95) [ 10.144085] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, [ 10.144102] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle -- [ 10.157672] [drm] LVDS was detected, not registering eDP [ 10.166546] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0 [ 10.170124] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no) [ 10.189773] nouveau 0000:01:00.0: bios: version 70.08.b1.00.07 [ 10.189822] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input9 [ 10.191638] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.191860] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10 [ 10.192086] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) -- [ 10.570862] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 10.571017] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 10.582532] acer_wmi: Acer Laptop ACPI-WMI Extras [ 10.582568] acer_wmi: Function bitmap for Communication Button: 0x801 [ 10.584352] input: Acer WMI hotkeys as /devices/virtual/input/input11 -- [ 25.840051] wlp4s0: associated [ 25.840055] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 29.727729] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95) [ 29.728009] nouveau 0000:01:00.0: DRM: suspending console... [ 29.728013] nouveau 0000:01:00.0: DRM: suspending display... -- [ 32.030347] nouveau 0000:01:00.0: DRM: resuming display... [ 32.030387] nouveau 0000:01:00.0: DRM: resuming console... [ 38.751764] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95) [ 38.752091] nouveau 0000:01:00.0: DRM: suspending console... [ 38.752096] nouveau 0000:01:00.0: DRM: suspending display... -- [ 526.726135] nouveau 0000:01:00.0: DRM: resuming display... [ 526.726183] nouveau 0000:01:00.0: DRM: resuming console... [ 531.862232] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95) [ 531.862644] nouveau 0000:01:00.0: DRM: suspending console... [ 531.862650] nouveau 0000:01:00.0: DRM: suspending display... [wolf@arch-netbook ~]$ [wolf@arch-netbook ~]$ dmesg \| grep -2i Firmware [ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd. [ 0.000000] efi: ACPI=0xc6ffe000 ACPI 2.0=0xc6ffe014 SMBIOS=0xc6e8a000 [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem46: [Reserved \| \| \| \| \| \| \| \| \| \| \| \| ] range=[0x0000000000000000-0x0000000000000000] (invalid) [ 0.000000] efi: mem47: [Reserved \| \| \| \| \| \| \| \| \| \| \| \| ] range=[0x0000000000000000-0x0000000000000000] (invalid) -- [ 0.250895] ACPI: Added _OSI(Processor Aggregator Device) [ 0.251179] ACPI: Executed 1 blocks of module-level executable AML code [ 0.264920] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.265538] ACPI: Dynamic OEM Table Load: [ 0.265553] ACPI: SSDT 0xFFFF880129E5F000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109) -- [ 10.584891] input: Acer BMA150 accelerometer as /devices/virtual/input/input12 [ 10.591495] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0 [ 10.692546] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00) [ 10.703886] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 10.715241] psmouse serio1: elantech: Elan sample query result 01, 3a, 75 [wolf@arch-netbook ~]$ Вот много букв, только мне половину не понятно :)

RusWolf

# 5 лет, 3 месяца назад

Темы: 11

Сообщения: 2394

Участник с: 16 июля 2016

vasek
А нет ли в BIOS/EFI опции типа After Power Failure? - действия ноута после сбоя питания.

Не, такой нет опции, UEFI в ноуте вообще очень, скудный, опций для настроек как кот наплакал.

[wolf@arch-netbook ~]$ dmesg | grep -2i acpi
[    0.000000] BIOS-e820: [mem 0x00000000c41ff000-0x00000000c43fefff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000c43ff000-0x00000000c6eeefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c6eef000-0x00000000c6f9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c6f9f000-0x00000000c6ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c6fff000-0x00000000c6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c7000000-0x00000000cf9fffff] reserved
--
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
[    0.000000] efi:  ACPI=0xc6ffe000  ACPI 2.0=0xc6ffe014  SMBIOS=0xc6e8a000
[    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
[    0.000000] efi: mem46: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
--
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x3748d000-0x37a3dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000C6FFE014 000024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 0x00000000C6FFE170 0000B4 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: FACP 0x00000000C6FEC000 00010C (v05 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: DSDT 0x00000000C6FEF000 00C539 (v02 ACRSYS IVB-CPT  00000000 INTL 20061109)
[    0.000000] ACPI: FACS 0x00000000C6F7C000 000040
[    0.000000] ACPI: SLIC 0x00000000C6FFD000 000176 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: SSDT 0x00000000C6FFC000 0001F9 (v01 ACRSYS PtidDevc 00001000 INTL 20061109)
[    0.000000] ACPI: ASF! 0x00000000C6FEE000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: HPET 0x00000000C6FEB000 000038 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: APIC 0x00000000C6FEA000 000098 (v03 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: MCFG 0x00000000C6FE9000 00003C (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: WPBT 0x00000000C6FDA000 000046 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: FPDT 0x00000000C6FD9000 000064 (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: SSDT 0x00000000C6FD8000 000758 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 0x00000000C6FD7000 000B22 (v01 PmRef  CpuPm    00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000C6FD6000 00003E (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: UEFI 0x00000000C6FD5000 000042 (v01 PTL    COMBUF   00000001 PTL  00000001)
[    0.000000] ACPI: MSDM 0x00000000C6F79000 000055 (v03 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: SSDT 0x00000000C6FD4000 000C64 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: UEFI 0x00000000C6FD3000 00026A (v01 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: BGRT 0x00000000C6FD2000 000038 (v00 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: DBG2 0x00000000C6FD1000 0000B4 (v00 ACRSYS ACRPRDCT 00000001 ANNI 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000012f5fffff]
--
[    0.000000]   Normal zone: 194048 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000c7a00000-0x00000000cf9fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
--
[    0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.64 BogoMIPS (lpj=1396820)
[    0.001000] pid_max: default: 32768 minimum: 301
[    0.001000] ACPI: Core revision 20170119
[    0.014370] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.015206] Security Framework initialized
[    0.015209] Yama: becoming mindful.
--
[    0.243426] devtmpfs: initialized
[    0.243521] x86/mm: Memory block size: 128MB
[    0.247761] PM: Registering ACPI NVS region [mem 0xc6eef000-0xc6f9efff] (720896 bytes)
[    0.247846] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.247864] futex hash table entries: 2048 (order: 5, 131072 bytes)
--
[    0.249127] cpuidle: using governor menu
[    0.249130] PCCT header not found.
[    0.249163] ACPI: bus type PCI registered
[    0.249165] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.249256] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.249280] PCI: not using MMCONFIG
--
[    0.249334] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.250548] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.250891] ACPI: Added _OSI(Module Device)
[    0.250892] ACPI: Added _OSI(Processor Device)
[    0.250893] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.250895] ACPI: Added _OSI(Processor Aggregator Device)
[    0.251179] ACPI: Executed 1 blocks of module-level executable AML code
[    0.264920] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.265538] ACPI: Dynamic OEM Table Load:
[    0.265553] ACPI: SSDT 0xFFFF880129E5F000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
[    0.266101] ACPI: Dynamic OEM Table Load:
[    0.266113] ACPI: SSDT 0xFFFF880129EAE800 000303 (v01 PmRef  ApIst    00003000 INTL 20061109)
[    0.266505] ACPI: Dynamic OEM Table Load:
[    0.266514] ACPI: SSDT 0xFFFF880129E94400 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
[    0.267728] ACPI : EC: EC started
[    0.267730] ACPI : EC: interrupt blocked
[    0.272224] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.272227] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.272230] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.272231] ACPI: Interpreter enabled
[    0.272268] ACPI: (supports S0 S3 S4 S5)
[    0.272270] ACPI: Using IOAPIC for interrupt routing
[    0.272307] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.272953] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.272966] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.282655] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.282662] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.282858] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.283416] PCI host bridge to bus 0000:00
[    0.283420] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
--
[    0.283608] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[    0.283661] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.283731] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.283792] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
[    0.283807] pci 0000:00:02.0: reg 0x10: [mem 0xf3400000-0xf37fffff 64bit]
--
[    0.284188] pci 0000:00:14.0: reg 0x10: [mem 0xf3b00000-0xf3b0ffff 64bit]
[    0.284315] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.284390] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.284446] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.284481] pci 0000:00:16.0: reg 0x10: [mem 0xf3b15000-0xf3b1500f 64bit]
--
[    0.284772] pci 0000:00:1a.0: reg 0x10: [mem 0xf3b1a000-0xf3b1a3ff]
[    0.284915] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.285009] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.285071] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.285103] pci 0000:00:1b.0: reg 0x10: [mem 0xf3b10000-0xf3b13fff 64bit]
[    0.285257] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.285339] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.285395] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.285535] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.285616] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.285671] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.285811] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.285889] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.285943] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.286083] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.286175] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.286239] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.286269] pci 0000:00:1d.0: reg 0x10: [mem 0xf3b19000-0xf3b193ff]
[    0.286415] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.286509] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.286565] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.286837] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
--
[    0.287499] pci 0000:01:00.0: reg 0x24: [io  0x3000-0x307f]
[    0.287510] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.287731] pci 0000:01:00.0: System wakeup disabled by ACPI
[    0.290194] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.290200] pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
--
[    0.291286] pci 0000:03:00.0: supports D1 D2
[    0.291288] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.291458] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.291578] pci 0000:03:00.2: [10ec:8168] type 00 class 0x020000
[    0.291667] pci 0000:03:00.2: reg 0x10: [io  0x2000-0x20ff]
--
[    0.295866] pci 0000:04:00.0: supports D1 D2
[    0.295867] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.295942] pci 0000:04:00.0: System wakeup disabled by ACPI
[    0.298251] pci 0000:00:1c.3: PCI bridge to [bus 04]
[    0.298265] pci 0000:00:1c.3:   bridge window [mem 0xf3900000-0xf39fffff]
[    0.299080] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299164] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299262] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299342] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299423] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299506] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299586] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299665] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.299926] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.300020] ACPI : EC: interrupt unblocked
[    0.300028] ACPI : EC: event unblocked
[    0.300035] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.300038] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.300178] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.300182] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
--
[    0.300195] vgaarb: loaded
[    0.300278] Registered efivars operations
[    0.307006] PCI: Using ACPI for IRQ routing
[    0.309158] PCI: pci_cache_line_size set to 64 bytes
[    0.309248] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
--
[    0.325164] VFS: Disk quotas dquot_6.6.0
[    0.325197] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.325312] pnp: PnP ACPI init
[    0.325519] system 00:00: [io  0x1000-0x100f] has been reserved
[    0.325522] system 00:00: [io  0xffff] has been reserved
--
[    0.325532] system 00:00: [io  0x0500-0x057f] has been reserved
[    0.325536] system 00:00: [mem 0xfe800000-0xfe80ffff] has been reserved
[    0.325542] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.325604] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.325691] system 00:02: [io  0x0454-0x0457] has been reserved
[    0.325695] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.325797] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.325828] pnp 00:04: Plug and Play ACPI device, IDs ETD0504 PNP0f13 (active)
[    0.325974] pnp 00:05: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    0.325980] pnp 00:05: disabling [mem 0xfffff000-0xffffffff disabled] because it overlaps 0000:04:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
--
[    0.326034] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[    0.326036] system 00:05: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.326040] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.326433] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[    0.326435] system 00:06: [mem 0x40000000-0x401fffff] has been reserved
[    0.326439] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.326474] pnp: PnP ACPI: found 7 devices
[    0.333403] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.333410] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.333413] pci 0000:04:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
--
[    0.625004] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.636823] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 25
[    0.637626] ACPI: bus type USB registered
[    0.637663] usbcore: registered new interface driver usbfs
[    0.637676] usbcore: registered new interface driver hub
--
[    6.432903] VBoxNetFlt: Successfully started.
[    6.927960] systemd-journald[192]: Received request to flush runtime journal from PID 1
[    7.675664] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170119/utaddress-247)
[    7.675675] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.675679] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247)
[    7.675685] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170119/utaddress-247)
[    7.675691] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.675692] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247)
[    7.675697] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170119/utaddress-247)
[    7.675702] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.675703] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170119/utaddress-247)
[    7.675708] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170119/utaddress-247)
[    7.675713] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.675714] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    7.708979] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    7.708986] ACPI: Lid Switch [LID0]
[    7.709133] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    7.709141] ACPI: Sleep Button [SLPB]
[    7.709238] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    7.709243] ACPI: Power Button [PWRF]
[    7.837640] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.927976] ACPI: Battery Slot [BAT0] (battery present)
[    7.947191] ACPI: AC Adapter [ADP1] (off-line)
[    8.022077] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    8.022359] thermal LNXTHERM:00: registered as thermal_zone0
[    8.022363] ACPI: Thermal Zone [TZS0] (51 C)
[    8.023108] thermal LNXTHERM:01: registered as thermal_zone1
[    8.023113] ACPI: Thermal Zone [TZS1] (41 C)
[    8.081256] wmi: Mapper loaded
[    8.382040] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
--
[   10.119627] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[   10.126185] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   10.142518] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[   10.142812] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[   10.143041] i915 0000:00:02.0: optimus capabilities: enabled, status dynamic power,
[   10.143229] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[   10.143715] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[   10.144085] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[   10.144102] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
--
[   10.157672] [drm] LVDS was detected, not registering eDP
[   10.166546] [drm] Initialized i915 1.6.0 20170123 for 0000:00:02.0 on minor 0
[   10.170124] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
[   10.189773] nouveau 0000:01:00.0: bios: version 70.08.b1.00.07
[   10.189822] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input9
[   10.191638] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   10.191860] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
[   10.192086] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
--
[   10.570862] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   10.571017] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.582532] acer_wmi: Acer Laptop ACPI-WMI Extras
[   10.582568] acer_wmi: Function bitmap for Communication Button: 0x801
[   10.584352] input: Acer WMI hotkeys as /devices/virtual/input/input11
--
[   25.840051] wlp4s0: associated
[   25.840055] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[   29.727729] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[   29.728009] nouveau 0000:01:00.0: DRM: suspending console...
[   29.728013] nouveau 0000:01:00.0: DRM: suspending display...
--
[   32.030347] nouveau 0000:01:00.0: DRM: resuming display...
[   32.030387] nouveau 0000:01:00.0: DRM: resuming console...
[   38.751764] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[   38.752091] nouveau 0000:01:00.0: DRM: suspending console...
[   38.752096] nouveau 0000:01:00.0: DRM: suspending display...
--
[  526.726135] nouveau 0000:01:00.0: DRM: resuming display...
[  526.726183] nouveau 0000:01:00.0: DRM: resuming console...
[  531.862232] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170119/nsarguments-95)
[  531.862644] nouveau 0000:01:00.0: DRM: suspending console...
[  531.862650] nouveau 0000:01:00.0: DRM: suspending display...
[wolf@arch-netbook ~]$

[wolf@arch-netbook ~]$ dmesg | grep -2i Firmware
[    0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
[    0.000000] efi:  ACPI=0xc6ffe000  ACPI 2.0=0xc6ffe014  SMBIOS=0xc6e8a000
[    0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries:
[    0.000000] efi: mem46: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
[    0.000000] efi: mem47: [Reserved           |   |  |  |  |  |  |  |   |  |  |  |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
--
[    0.250895] ACPI: Added _OSI(Processor Aggregator Device)
[    0.251179] ACPI: Executed 1 blocks of module-level executable AML code
[    0.264920] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.265538] ACPI: Dynamic OEM Table Load:
[    0.265553] ACPI: SSDT 0xFFFF880129E5F000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
--
[   10.584891] input: Acer BMA150 accelerometer as /devices/virtual/input/input12
[   10.591495] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[   10.692546] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00)
[   10.703886] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f.
[   10.715241] psmouse serio1: elantech: Elan sample query result 01, 3a, 75
[wolf@arch-netbook ~]$

Вот много букв, только мне половину не понятно :)

indeviral	# 5 лет, 3 месяца назад (отредактировано 5 лет, 3 месяца назад)
Темы: 38 Сообщения: 3165 Участник с: 10 августа 2013	отключите дискретную карточку в биос. потом попробуйте не просто acpi=off, а как то так: `noapic acpi=off` и так как [Firmware Bug]: BIOS _OSI(Linux) query ignored osi махнуть, пробовали? На какой нибудь Windows 2012? Ошибки в тексте-неповторимый стиль автора©

indeviral

# 5 лет, 3 месяца назад (отредактировано 5 лет, 3 месяца назад)

Темы: 38

Сообщения: 3165

Участник с: 10 августа 2013

отключите дискретную карточку в биос.
потом попробуйте не просто acpi=off, а как то так:

noapic acpi=off

и так как

[Firmware Bug]: BIOS _OSI(Linux) query ignored

osi махнуть, пробовали? На какой нибудь Windows 2012?

RusWolf	# 5 лет, 3 месяца назад
Темы: 11 Сообщения: 2394 Участник с: 16 июля 2016	indeviral отключите дискретную карточку в биос. Нету такой возможности. indeviral osi махнуть, пробовали? Если разговор про acpi_osi, перепробовал разные варианты, не помогает.

RusWolf

# 5 лет, 3 месяца назад

Темы: 11

Сообщения: 2394

Участник с: 16 июля 2016

indeviral
отключите дискретную карточку в биос.

Нету такой возможности.

indeviral
osi махнуть, пробовали?

Если разговор про acpi_osi, перепробовал разные варианты, не помогает.