Не работает swap

"Boot with minimal options"   "ro root=UUID=6337d2c2-8686-4c58-858f-44d2b41ee4c7"

#
# /etc/fstab: static file system information
#
# <file system> <dir>   <type>  <options>       <dump>  <pass>
# UUID=6337d2c2-8686-4c58-858f-44d2b41ee4c7
/dev/sda2               /               ext2            rw,relatime,block_validity,barrier,user_xattr,acl       0 1

# UUID=D922-7F60
/dev/sda1               /boot           vfat            rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro    0 2

# UUID=af8333a1-db6f-46bf-926c-351a892bdd5e
/dev/sda4               /srv            ext2            rw,relatime,block_validity,barrier,user_xattr,acl       0 2

# UUID=ba77d225-947d-47c0-aa19-eb26854c3987
/dev/sda6               /home           ext2            rw,relatime,block_validity,barrier,user_xattr,acl       0 2

# UUID=d453117a-a37d-400f-b137-fa2835c25812
/dev/sda3               none            swap            defaults        0 0

allon925
Из-за чего спящий режим может не работать, что поправить?

 resume=/dev/sda3

RusWolf
resume=/dev/sda3

resume=UUID=твой_UUID_swap

"Boot with minimal options"   "ro root=UUID=6337d2c2-8686-4c58-858f-44d2b41ee4c7 resume=/dev/sda3"

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES="piix ide_disk reiserfs"
MODULES="amdgpu"

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=""

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS="base"
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS="base udev autodetect block filesystems"
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS="base udev block filesystems"
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS="base udev block mdadm encrypt filesystems"
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS="base udev block lvm2 filesystems"
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.
HOOKS="base udev autodetect modconf block filesystems keyboard fsck resume"

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""