[РЕШЕНО] Ноутбук ASUS k53s не выставляется нужное разрешение лаптопного экрана

safocl	# 6 лет, 2 месяца назад (отредактировано 6 лет, 2 месяца назад)
Темы: 121 Сообщения: 1570 Участник с: 08 октября 2015	toZen safocl ну смари, у меня нет там файла i915.ko в дерикториях модулей ядра.... Не верю! (с) `sudo find / -iname 'i915.ko'` ?? енто на стационарнике, пожже выложу с ноута [[email protected] ~]$ sudo find / -iname 'i915.ko' [sudo] пароль для safff: find: ‘/run/user/1001/gvfs’: Отказано в доступе /usr/lib/modules/4.6.2-1-ARCH/kernel/drivers/gpu/drm/i915/i915.ko.gz

# 6 лет, 2 месяца назад (отредактировано 6 лет, 2 месяца назад)

Сообщения: 1570

Участник с: 08 октября 2015

toZen
safocl
ну смари, у меня нет там файла i915.ko в дерикториях модулей ядра....
Не верю! (с)
sudo find / -iname '*i915.ko*'
??

енто на стационарнике, пожже выложу с ноута

[[email protected] ~]$ sudo find / -iname '*i915.ko*'
[sudo] пароль для safff:
find: ‘/run/user/1001/gvfs’: Отказано в доступе
/usr/lib/modules/4.6.2-1-ARCH/kernel/drivers/gpu/drm/i915/i915.ko.gz

safocl	# 6 лет, 2 месяца назад
Темы: 121 Сообщения: 1570 Участник с: 08 октября 2015	короче тотже файл находит и на ноуте... но енто же архив, поч он в архиве а не распакован???

Natrio	# 6 лет, 2 месяца назад
Темы: 47 Сообщения: 4763 Участник с: 08 января 2011	$ find /usr/lib/modules/ -iname ".ko" /usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxdrv.ko /usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxpci.ko /usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxnetflt.ko /usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxnetadp.ko /usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxdrv.ko /usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxpci.ko /usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxnetflt.ko /usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxnetadp.ko $ find /usr/lib/modules/ -iname ".ko.gz"\|wc -l 7765 $ Как видите, у меня не сжаты только левые модули от VirtualBox, остальные сжаты, и это не мешает им прекрасно работать.

Natrio

# 6 лет, 2 месяца назад

Темы: 47

Сообщения: 4763

Участник с: 08 января 2011

$ find /usr/lib/modules/ -iname "*.ko"
/usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxdrv.ko
/usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxpci.ko
/usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxnetflt.ko
/usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxnetadp.ko
/usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxdrv.ko
/usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxpci.ko
/usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxnetflt.ko
/usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxnetadp.ko
$ find /usr/lib/modules/ -iname "*.ko.gz"|wc -l
7765
$

Как видите, у меня не сжаты только левые модули от VirtualBox, остальные сжаты, и это не мешает им прекрасно работать.

safocl	# 6 лет, 2 месяца назад
Темы: 121 Сообщения: 1570 Участник с: 08 октября 2015	Natrio $ find /usr/lib/modules/ -iname ".ko" /usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxdrv.ko /usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxpci.ko /usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxnetflt.ko /usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxnetadp.ko /usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxdrv.ko /usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxpci.ko /usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxnetflt.ko /usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxnetadp.ko $ find /usr/lib/modules/ -iname ".ko.gz"\|wc -l 7765 $ Как видите, у меня не сжаты только левые модули от VirtualBox, остальные сжаты, и это не мешает им прекрасно работать. ну ок, чо мне енто дало чо модуль все же существует? с ним все понятно, но увы не решает проблему, при чем повторюсь опять же, у подключенного внешнего моника разрешение нормальное делается и через вга и через хдмай, а с лаптопным ни в какую.. вот где плазма хранит настройки разрешений экранов? никак не могу отыскать. енто же где то в сессии должно быть, но поиск по фразе разрешения не дает результата

safocl

# 6 лет, 2 месяца назад

Темы: 121

Сообщения: 1570

Участник с: 08 октября 2015

Natrio

$ find /usr/lib/modules/ -iname "*.ko"
/usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxdrv.ko
/usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxpci.ko
/usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxnetflt.ko
/usr/lib/modules/4.4.13-1-lts/kernel/misc/vboxnetadp.ko
/usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxdrv.ko
/usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxpci.ko
/usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxnetflt.ko
/usr/lib/modules/4.6.2-1-ARCH/kernel/misc/vboxnetadp.ko
$ find /usr/lib/modules/ -iname "*.ko.gz"|wc -l
7765
$

ну ок, чо мне енто дало чо модуль все же существует? с ним все понятно, но увы не решает проблему, при чем повторюсь опять же, у подключенного внешнего моника разрешение нормальное делается и через вга и через хдмай, а с лаптопным ни в какую..

вот где плазма хранит настройки разрешений экранов? никак не могу отыскать. енто же где то в сессии должно быть, но поиск по фразе разрешения не дает результата

vdemin	# 6 лет, 2 месяца назад
Темы: 54 Сообщения: 1615 Участник с: 24 января 2009	Удалите конфиг иксов, если создавали его, и после перезагрузки выложите куда-нибудь cat /var/log/Xorg.0.log safocl вот где плазма хранит настройки разрешений экранов? В папке ~/.local/share/kscreen/ , за это дело в кедах отвечает пакет kscreen, можете его удалить (вряд ли поможет).

vdemin

# 6 лет, 2 месяца назад

Темы: 54

Сообщения: 1615

Участник с: 24 января 2009

Удалите конфиг иксов, если создавали его, и после перезагрузки выложите куда-нибудь cat /var/log/Xorg.0.log

safocl
вот где плазма хранит настройки разрешений экранов?

В папке ~/.local/share/kscreen/ , за это дело в кедах отвечает пакет kscreen, можете его удалить (вряд ли поможет).

safocl	# 6 лет, 2 месяца назад
Темы: 121 Сообщения: 1570 Участник с: 08 октября 2015	вот лог [ 21.505] (--) Log file renamed from "/var/log/Xorg.pid-531.log" to "/var/log/Xorg.0.log" [ 21.506] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 21.506] X Protocol Version 11, Revision 0 [ 21.506] Build Operating System: Linux 4.5.1-1-ARCH x86_64 [ 21.506] Current Operating System: Linux safocl_ubivcheg 4.6.2-1-ARCH #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016 x86_64 [ 21.506] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98a6e7b7-164a-4619-8bad-804a1b6bcb0e rw quiet [ 21.506] Build Date: 03 June 2016 07:28:24AM [ 21.506] [ 21.506] Current version of pixman: 0.34.0 [ 21.506] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 21.506] Markers: (--) probed, () from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 21.506] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 16 08:39:16 2016 [ 21.506] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 21.506] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 21.507] (==) ServerLayout "Layout0" [ 21.507] () \|-->Screen "Screen0" (0) [ 21.507] () \| \|-->Monitor "<default monitor>" [ 21.507] () \| \|-->Device "Device0" [ 21.508] () \| \|-->GPUDevice "Device1" [ 21.508] (==) No monitor specified for screen "Screen0". Using a default monitor configuration. [ 21.508] () \|-->Input Device "Keyboard0" [ 21.508] () \|-->Input Device "Mouse0" [ 21.508] () Option "Xinerama" "0" [ 21.508] (==) Automatically adding devices [ 21.508] (==) Automatically enabling devices [ 21.508] (==) Automatically adding GPU devices [ 21.508] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 21.508] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 21.508] Entry deleted from font path. [ 21.508] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 21.508] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 21.508] Entry deleted from font path. [ 21.508] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 21.508] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/ [ 21.508] (==) ModulePath set to "/usr/lib/xorg/modules" [ 21.508] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 21.508] (WW) Disabling Keyboard0 [ 21.508] (WW) Disabling Mouse0 [ 21.508] (II) Loader magic: 0x821d20 [ 21.508] (II) Module ABI versions: [ 21.508] X.Org ANSI C Emulation: 0.4 [ 21.508] X.Org Video Driver: 20.0 [ 21.508] X.Org XInput driver : 22.1 [ 21.508] X.Org Server Extension : 9.0 [ 21.510] (++) using VT number 1 [ 21.510] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 21.511] (II) xfree86: Adding drm device (/dev/dri/card0) [ 21.514] (--) PCI:*(0:0:2:0) 8086:0116:1043:212e rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072 [ 21.514] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 21.514] (II) LoadModule: "glx" [ 21.514] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 21.517] (II) Module glx: vendor="X.Org Foundation" [ 21.517] compiled for 1.18.3, module version = 1.0.0 [ 21.517] ABI class: X.Org Server Extension, version 9.0 [ 21.517] (==) AIGLX enabled [ 21.517] (II) LoadModule: "nvidia" [ 21.518] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 21.518] (II) Module nvidia: vendor="NVIDIA Corporation" [ 21.518] compiled for 4.0.2, module version = 1.0.0 [ 21.518] Module class: X.Org Video Driver [ 21.518] (II) NVIDIA dlloader X Driver 364.19 Tue Apr 19 13:48:55 PDT 2016 [ 21.518] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 21.519] (EE) No devices detected. [ 21.519] (EE) Fatal server error: [ 21.519] (EE) no screens found(EE) [ 21.519] (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 21.519] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. [ 21.519] (EE)

safocl

# 6 лет, 2 месяца назад

Темы: 121

Сообщения: 1570

Участник с: 08 октября 2015

вот лог

[    21.505] (--) Log file renamed from "/var/log/Xorg.pid-531.log" to "/var/log/Xorg.0.log"
[    21.506]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[    21.506] X Protocol Version 11, Revision 0
[    21.506] Build Operating System: Linux 4.5.1-1-ARCH x86_64
[    21.506] Current Operating System: Linux safocl_ubivcheg 4.6.2-1-ARCH #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016 x86_64
[    21.506] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98a6e7b7-164a-4619-8bad-804a1b6bcb0e rw quiet
[    21.506] Build Date: 03 June 2016  07:28:24AM
[    21.506]
[    21.506] Current version of pixman: 0.34.0
[    21.506] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    21.506] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    21.506] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 16 08:39:16 2016
[    21.506] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    21.506] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    21.507] (==) ServerLayout "Layout0"
[    21.507] (**) |-->Screen "Screen0" (0)
[    21.507] (**) |   |-->Monitor "<default monitor>"
[    21.507] (**) |   |-->Device "Device0"
[    21.508] (**) |   |-->GPUDevice "Device1"
[    21.508] (==) No monitor specified for screen "Screen0".
	Using a default monitor configuration.
[    21.508] (**) |-->Input Device "Keyboard0"
[    21.508] (**) |-->Input Device "Mouse0"
[    21.508] (**) Option "Xinerama" "0"
[    21.508] (==) Automatically adding devices
[    21.508] (==) Automatically enabling devices
[    21.508] (==) Automatically adding GPU devices
[    21.508] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    21.508] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    21.508] 	Entry deleted from font path.
[    21.508] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    21.508] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    21.508] 	Entry deleted from font path.
[    21.508] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    21.508] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    21.508] (==) ModulePath set to "/usr/lib/xorg/modules"
[    21.508] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    21.508] (WW) Disabling Keyboard0
[    21.508] (WW) Disabling Mouse0
[    21.508] (II) Loader magic: 0x821d20
[    21.508] (II) Module ABI versions:
[    21.508] 	X.Org ANSI C Emulation: 0.4
[    21.508] 	X.Org Video Driver: 20.0
[    21.508] 	X.Org XInput driver : 22.1
[    21.508] 	X.Org Server Extension : 9.0
[    21.510] (++) using VT number 1

[    21.510] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    21.511] (II) xfree86: Adding drm device (/dev/dri/card0)
[    21.514] (--) PCI:*(0:0:2:0) 8086:0116:1043:212e rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[    21.514] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    21.514] (II) LoadModule: "glx"
[    21.514] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    21.517] (II) Module glx: vendor="X.Org Foundation"
[    21.517] 	compiled for 1.18.3, module version = 1.0.0
[    21.517] 	ABI class: X.Org Server Extension, version 9.0
[    21.517] (==) AIGLX enabled
[    21.517] (II) LoadModule: "nvidia"
[    21.518] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    21.518] (II) Module nvidia: vendor="NVIDIA Corporation"
[    21.518] 	compiled for 4.0.2, module version = 1.0.0
[    21.518] 	Module class: X.Org Video Driver
[    21.518] (II) NVIDIA dlloader X Driver  364.19  Tue Apr 19 13:48:55 PDT 2016
[    21.518] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    21.519] (EE) No devices detected.
[    21.519] (EE)
Fatal server error:
[    21.519] (EE) no screens found(EE)
[    21.519] (EE)
Please consult the The X.Org Foundation support
	 at http://wiki.x.org
 for help.
[    21.519] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    21.519] (EE)

safocl	# 6 лет, 2 месяца назад
Темы: 121 Сообщения: 1570 Участник с: 08 октября 2015	но енто с неудаленным конфигом для нвидии

safocl	# 6 лет, 2 месяца назад (отредактировано 6 лет, 2 месяца назад)
Темы: 121 Сообщения: 1570 Участник с: 08 октября 2015	а вот лог с полностью всеми удаленными конфигами из етс/Х11 [ 18.909] (--) Log file renamed from "/var/log/Xorg.pid-357.log" to "/var/log/Xorg.0.log" [ 18.941] X.Org X Server 1.18.3 Release Date: 2016-04-04 [ 18.941] X Protocol Version 11, Revision 0 [ 18.941] Build Operating System: Linux 4.5.1-1-ARCH x86_64 [ 18.941] Current Operating System: Linux safocl_ubivcheg 4.6.2-1-ARCH #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016 x86_64 [ 18.941] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98a6e7b7-164a-4619-8bad-804a1b6bcb0e rw quiet [ 18.941] Build Date: 03 June 2016 07:28:24AM [ 18.941] [ 18.941] Current version of pixman: 0.34.0 [ 18.941] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.941] Markers: (--) probed, () from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.941] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 16 08:57:02 2016 [ 18.962] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 19.006] (==) No Layout section. Using the first Screen section. [ 19.007] (==) No screen section available. Using defaults. [ 19.007] () \|-->Screen "Default Screen Section" (0) [ 19.007] (*) \| \|-->Monitor "<default monitor>" [ 19.035] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 19.035] (==) Automatically adding devices [ 19.035] (==) Automatically enabling devices [ 19.035] (==) Automatically adding GPU devices [ 19.035] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 19.104] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 19.104] Entry deleted from font path. [ 19.104] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 19.104] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 19.104] Entry deleted from font path. [ 19.104] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 19.104] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/OTF/, /usr/share/fonts/Type1/ [ 19.104] (==) ModulePath set to "/usr/lib/xorg/modules" [ 19.104] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 19.109] (II) Loader magic: 0x821d20 [ 19.109] (II) Module ABI versions: [ 19.109] X.Org ANSI C Emulation: 0.4 [ 19.109] X.Org Video Driver: 20.0 [ 19.109] X.Org XInput driver : 22.1 [ 19.109] X.Org Server Extension : 9.0 [ 19.111] (++) using VT number 1 [ 19.111] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 19.112] (II) xfree86: Adding drm device (/dev/dri/card0) [ 19.114] (--) PCI:(0:0:2:0) 8086:0116:1043:212e rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072 [ 19.114] (--) PCI: (0:1:0:0) 10de:0de9:1043:212e rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288 [ 19.115] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 19.115] (II) LoadModule: "glx" [ 19.159] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 19.343] (II) Module glx: vendor="X.Org Foundation" [ 19.343] compiled for 1.18.3, module version = 1.0.0 [ 19.343] ABI class: X.Org Server Extension, version 9.0 [ 19.343] (==) AIGLX enabled [ 19.343] (==) Matched intel as autoconfigured driver 0 [ 19.343] (==) Matched intel as autoconfigured driver 1 [ 19.343] (==) Matched modesetting as autoconfigured driver 2 [ 19.343] (==) Matched fbdev as autoconfigured driver 3 [ 19.343] (==) Matched vesa as autoconfigured driver 4 [ 19.343] (==) Assigned the driver to the xf86ConfigLayout [ 19.343] (II) LoadModule: "intel" [ 19.372] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 19.424] (II) Module intel: vendor="X.Org Foundation" [ 19.424] compiled for 1.18.3, module version = 2.99.917 [ 19.424] Module class: X.Org Video Driver [ 19.424] ABI class: X.Org Video Driver, version 20.0 [ 19.424] (II) LoadModule: "modesetting" [ 19.424] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 19.437] (II) Module modesetting: vendor="X.Org Foundation" [ 19.437] compiled for 1.18.3, module version = 1.18.3 [ 19.437] Module class: X.Org Video Driver [ 19.437] ABI class: X.Org Video Driver, version 20.0 [ 19.437] (II) LoadModule: "fbdev" [ 19.437] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 19.443] (II) Module fbdev: vendor="X.Org Foundation" [ 19.443] compiled for 1.18.0, module version = 0.4.4 [ 19.443] Module class: X.Org Video Driver [ 19.443] ABI class: X.Org Video Driver, version 20.0 [ 19.443] (II) LoadModule: "vesa" [ 19.443] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 19.453] (II) Module vesa: vendor="X.Org Foundation" [ 19.453] compiled for 1.18.0, module version = 2.3.4 [ 19.453] Module class: X.Org Video Driver [ 19.453] ABI class: X.Org Video Driver, version 20.0 [ 19.453] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 19.453] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000 [ 19.453] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100 [ 19.453] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300 [ 19.453] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 19.453] (II) FBDEV: driver for framebuffer: fbdev [ 19.453] (II) VESA: driver for VESA chipsets: vesa [ 19.460] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160229 [ 19.460] (II) intel(0): SNA compiled from 2.99.917-654-ga508b11 [ 19.462] (WW) Falling back to old probe method for modesetting [ 19.463] (WW) Falling back to old probe method for fbdev [ 19.463] (II) Loading sub module "fbdevhw" [ 19.463] (II) LoadModule: "fbdevhw" [ 19.463] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 19.473] (II) Module fbdevhw: vendor="X.Org Foundation" [ 19.474] compiled for 1.18.3, module version = 0.0.2 [ 19.474] ABI class: X.Org Video Driver, version 20.0 [ 19.474] (WW) Falling back to old probe method for vesa [ 19.485] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000 [ 19.485] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads [ 19.485] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 19.485] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 19.485] (==) intel(0): RGB weight 888 [ 19.485] (==) intel(0): Default visual is TrueColor [ 19.485] (II) intel(0): Output LVDS1 has no monitor section [ 19.500] (--) intel(0): Found backlight control interface acpi_video1 (type 'firmware') for output LVDS1 [ 19.500] (II) intel(0): Enabled output LVDS1 [ 19.500] (II) intel(0): Output VGA1 has no monitor section [ 19.500] (II) intel(0): Enabled output VGA1 [ 19.500] (II) intel(0): Output HDMI1 has no monitor section [ 19.500] (II) intel(0): Enabled output HDMI1 [ 19.500] (II) intel(0): Output DP1 has no monitor section [ 19.500] (II) intel(0): Enabled output DP1 [ 19.500] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 19.500] (II) intel(0): Output VIRTUAL1 has no monitor section [ 19.500] (II) intel(0): Enabled output VIRTUAL1 [ 19.500] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0 [ 19.500] (==) intel(0): TearFree disabled [ 19.500] (==) intel(0): DPI set to (96, 96) [ 19.500] (II) Loading sub module "dri2" [ 19.500] (II) LoadModule: "dri2" [ 19.500] (II) Module "dri2" already built-in [ 19.500] (II) Loading sub module "present" [ 19.500] (II) LoadModule: "present" [ 19.500] (II) Module "present" already built-in [ 19.500] (II) UnloadModule: "modesetting" [ 19.500] (II) Unloading modesetting [ 19.500] (II) UnloadModule: "fbdev" [ 19.500] (II) Unloading fbdev [ 19.500] (II) UnloadSubModule: "fbdevhw" [ 19.500] (II) Unloading fbdevhw [ 19.500] (II) UnloadModule: "vesa" [ 19.500] (II) Unloading vesa [ 19.500] (==) Depth 24 pixmap format is 32 bpp [ 19.566] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend [ 19.566] (==) intel(0): Backing store enabled [ 19.566] (==) intel(0): Silken mouse enabled [ 19.567] (II) intel(0): HW Cursor enabled [ 19.567] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 19.568] (==) intel(0): DPMS enabled [ 19.569] (==) intel(0): Display hotplug detection enabled [ 19.569] (II) intel(0): [DRI2] Setup complete [ 19.569] (II) intel(0): [DRI2] DRI driver: i965 [ 19.569] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 19.569] (II) intel(0): direct rendering: DRI2 enabled [ 19.569] (II) intel(0): hardware support for Present enabled [ 19.569] (--) RandR disabled [ 19.785] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 19.785] (II) AIGLX: enabled GLX_ARB_create_context [ 19.785] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 19.785] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 19.785] (II) AIGLX: enabled GLX_INTEL_swap_event [ 19.785] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 19.785] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 19.785] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 19.785] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 19.785] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 19.785] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 19.786] (II) AIGLX: Loaded and initialized i965 [ 19.786] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 19.797] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 19.797] (II) intel(0): Setting screen physical size to 361 x 203 [ 20.211] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 20.211] () Power Button: Applying InputClass "evdev keyboard catchall" [ 20.211] () Power Button: Applying InputClass "libinput keyboard catchall" [ 20.211] (II) LoadModule: "libinput" [ 20.211] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 20.244] (II) Module libinput: vendor="X.Org Foundation" [ 20.244] compiled for 1.18.3, module version = 0.19.0 [ 20.244] Module class: X.Org XInput Driver [ 20.244] ABI class: X.Org XInput driver, version 22.1 [ 20.244] (II) Using input driver 'libinput' for 'Power Button' [ 20.244] () Power Button: always reports core events [ 20.244] () Option "Device" "/dev/input/event2" [ 20.244] () Option "_source" "server/udev" [ 20.245] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard [ 20.245] (II) input device 'Power Button', /dev/input/event2 is a keyboard [ 20.257] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" [ 20.257] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 20.258] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard [ 20.258] (II) input device 'Power Button', /dev/input/event2 is a keyboard [ 20.258] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 20.258] () Video Bus: Applying InputClass "evdev keyboard catchall" [ 20.258] () Video Bus: Applying InputClass "libinput keyboard catchall" [ 20.258] (II) Using input driver 'libinput' for 'Video Bus' [ 20.258] () Video Bus: always reports core events [ 20.258] () Option "Device" "/dev/input/event4" [ 20.258] () Option "_source" "server/udev" [ 20.259] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard [ 20.259] (II) input device 'Video Bus', /dev/input/event4 is a keyboard [ 20.270] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4" [ 20.270] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 20.271] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard [ 20.271] (II) input device 'Video Bus', /dev/input/event4 is a keyboard [ 20.271] (II) config/udev: Adding input device Video Bus (/dev/input/event3) [ 20.271] () Video Bus: Applying InputClass "evdev keyboard catchall" [ 20.272] () Video Bus: Applying InputClass "libinput keyboard catchall" [ 20.272] (II) Using input driver 'libinput' for 'Video Bus' [ 20.272] () Video Bus: always reports core events [ 20.272] () Option "Device" "/dev/input/event3" [ 20.272] () Option "_source" "server/udev" [ 20.272] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard [ 20.272] (II) input device 'Video Bus', /dev/input/event3 is a keyboard [ 20.283] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input3/event3" [ 20.283] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 20.284] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard [ 20.284] (II) input device 'Video Bus', /dev/input/event3 is a keyboard [ 20.285] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 20.285] (II) No input driver specified, ignoring this device. [ 20.285] (II) This device may have been added with another device file. [ 20.285] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 20.285] () Sleep Button: Applying InputClass "evdev keyboard catchall" [ 20.285] () Sleep Button: Applying InputClass "libinput keyboard catchall" [ 20.285] (II) Using input driver 'libinput' for 'Sleep Button' [ 20.285] () Sleep Button: always reports core events [ 20.285] () Option "Device" "/dev/input/event1" [ 20.285] () Option "_source" "server/udev" [ 20.286] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard [ 20.286] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard [ 20.296] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1" [ 20.296] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 20.297] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard [ 20.297] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard [ 20.299] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event12) [ 20.299] () USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall" [ 20.299] () USB 2.0 UVC VGA WebCam: Applying InputClass "libinput keyboard catchall" [ 20.299] (II) Using input driver 'libinput' for 'USB 2.0 UVC VGA WebCam' [ 20.299] () USB 2.0 UVC VGA WebCam: always reports core events [ 20.299] () Option "Device" "/dev/input/event12" [ 20.299] () Option "_source" "server/udev" [ 20.300] (II) input device 'USB 2.0 UVC VGA WebCam', /dev/input/event12 is tagged by udev as: Keyboard [ 20.300] (II) input device 'USB 2.0 UVC VGA WebCam', /dev/input/event12 is a keyboard [ 20.340] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input19/event12" [ 20.340] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 10) [ 20.341] (II) input device 'USB 2.0 UVC VGA WebCam', /dev/input/event12 is tagged by udev as: Keyboard [ 20.341] (II) input device 'USB 2.0 UVC VGA WebCam', /dev/input/event12 is a keyboard [ 20.342] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9) [ 20.342] (II) No input driver specified, ignoring this device. [ 20.342] (II) This device may have been added with another device file. [ 20.343] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10) [ 20.343] (II) No input driver specified, ignoring this device. [ 20.343] (II) This device may have been added with another device file. [ 20.343] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11) [ 20.343] (II) No input driver specified, ignoring this device. [ 20.343] (II) This device may have been added with another device file. [ 20.344] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8) [ 20.344] () Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 20.344] () Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall" [ 20.344] (II) Using input driver 'libinput' for 'Asus WMI hotkeys' [ 20.344] () Asus WMI hotkeys: always reports core events [ 20.344] () Option "Device" "/dev/input/event8" [ 20.344] () Option "_source" "server/udev" [ 20.345] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard [ 20.345] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is a keyboard [ 20.363] () Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event8" [ 20.363] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11) [ 20.365] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard [ 20.365] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is a keyboard [ 20.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5) [ 20.366] () AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 20.366] () AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 20.366] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 20.366] () AT Translated Set 2 keyboard: always reports core events [ 20.366] () Option "Device" "/dev/input/event5" [ 20.366] () Option "_source" "server/udev" [ 20.366] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard [ 20.367] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard [ 20.393] () Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5" [ 20.393] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12) [ 20.394] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard [ 20.394] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard [ 20.395] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7) [ 20.395] () SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 20.395] () SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall" [ 20.395] () SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 20.395] () SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 20.395] () SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall" [ 20.395] () SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchscreen catchall" [ 20.395] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad' [ 20.395] () SynPS/2 Synaptics TouchPad: always reports core events [ 20.395] () Option "Device" "/dev/input/event7" [ 20.395] () Option "_source" "server/udev" [ 20.396] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is tagged by udev as: Touchpad Touchscreen [ 20.396] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is a touchpad [ 20.430] () Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event7" [ 20.430] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13) [ 20.430] () Option "AccelerationScheme" "none" [ 20.430] () SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0 [ 20.430] () SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 20.430] () SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 20.431] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is tagged by udev as: Touchpad Touchscreen [ 20.431] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is a touchpad [ 20.432] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 20.432] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates" [ 20.433] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 20.433] (II) No input driver specified, ignoring this device. [ 20.433] (II) This device may have been added with another device file. [ 21.500] (II) intel(0): EDID vendor "AUO", prod id 9964 [ 21.500] (II) intel(0): Printing DDC gathered Modelines: [ 21.500] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP) [ 135.428] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none [ 136.196] (II) intel(0): resizing framebuffer to 864x486

safocl

# 6 лет, 2 месяца назад (отредактировано 6 лет, 2 месяца назад)

Темы: 121

Сообщения: 1570

Участник с: 08 октября 2015

а вот лог с полностью всеми удаленными конфигами из етс/Х11

[    18.909] (--) Log file renamed from "/var/log/Xorg.pid-357.log" to "/var/log/Xorg.0.log"
[    18.941]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[    18.941] X Protocol Version 11, Revision 0
[    18.941] Build Operating System: Linux 4.5.1-1-ARCH x86_64
[    18.941] Current Operating System: Linux safocl_ubivcheg 4.6.2-1-ARCH #1 SMP PREEMPT Wed Jun 8 08:40:59 CEST 2016 x86_64
[    18.941] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=98a6e7b7-164a-4619-8bad-804a1b6bcb0e rw quiet
[    18.941] Build Date: 03 June 2016  07:28:24AM
[    18.941]
[    18.941] Current version of pixman: 0.34.0
[    18.941] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    18.941] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.941] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 16 08:57:02 2016
[    18.962] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.006] (==) No Layout section.  Using the first Screen section.
[    19.007] (==) No screen section available. Using defaults.
[    19.007] (**) |-->Screen "Default Screen Section" (0)
[    19.007] (**) |   |-->Monitor "<default monitor>"
[    19.035] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    19.035] (==) Automatically adding devices
[    19.035] (==) Automatically enabling devices
[    19.035] (==) Automatically adding GPU devices
[    19.035] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    19.104] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    19.104] 	Entry deleted from font path.
[    19.104] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    19.104] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    19.104] 	Entry deleted from font path.
[    19.104] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    19.104] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    19.104] (==) ModulePath set to "/usr/lib/xorg/modules"
[    19.104] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    19.109] (II) Loader magic: 0x821d20
[    19.109] (II) Module ABI versions:
[    19.109] 	X.Org ANSI C Emulation: 0.4
[    19.109] 	X.Org Video Driver: 20.0
[    19.109] 	X.Org XInput driver : 22.1
[    19.109] 	X.Org Server Extension : 9.0
[    19.111] (++) using VT number 1

[    19.111] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    19.112] (II) xfree86: Adding drm device (/dev/dri/card0)
[    19.114] (--) PCI:*(0:0:2:0) 8086:0116:1043:212e rev 9, Mem @ 0xdc400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[    19.114] (--) PCI: (0:1:0:0) 10de:0de9:1043:212e rev 161, Mem @ 0xdb000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    19.115] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    19.115] (II) LoadModule: "glx"
[    19.159] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    19.343] (II) Module glx: vendor="X.Org Foundation"
[    19.343] 	compiled for 1.18.3, module version = 1.0.0
[    19.343] 	ABI class: X.Org Server Extension, version 9.0
[    19.343] (==) AIGLX enabled
[    19.343] (==) Matched intel as autoconfigured driver 0
[    19.343] (==) Matched intel as autoconfigured driver 1
[    19.343] (==) Matched modesetting as autoconfigured driver 2
[    19.343] (==) Matched fbdev as autoconfigured driver 3
[    19.343] (==) Matched vesa as autoconfigured driver 4
[    19.343] (==) Assigned the driver to the xf86ConfigLayout
[    19.343] (II) LoadModule: "intel"
[    19.372] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    19.424] (II) Module intel: vendor="X.Org Foundation"
[    19.424] 	compiled for 1.18.3, module version = 2.99.917
[    19.424] 	Module class: X.Org Video Driver
[    19.424] 	ABI class: X.Org Video Driver, version 20.0
[    19.424] (II) LoadModule: "modesetting"
[    19.424] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    19.437] (II) Module modesetting: vendor="X.Org Foundation"
[    19.437] 	compiled for 1.18.3, module version = 1.18.3
[    19.437] 	Module class: X.Org Video Driver
[    19.437] 	ABI class: X.Org Video Driver, version 20.0
[    19.437] (II) LoadModule: "fbdev"
[    19.437] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    19.443] (II) Module fbdev: vendor="X.Org Foundation"
[    19.443] 	compiled for 1.18.0, module version = 0.4.4
[    19.443] 	Module class: X.Org Video Driver
[    19.443] 	ABI class: X.Org Video Driver, version 20.0
[    19.443] (II) LoadModule: "vesa"
[    19.443] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    19.453] (II) Module vesa: vendor="X.Org Foundation"
[    19.453] 	compiled for 1.18.0, module version = 2.3.4
[    19.453] 	Module class: X.Org Video Driver
[    19.453] 	ABI class: X.Org Video Driver, version 20.0
[    19.453] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    19.453] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    19.453] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    19.453] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    19.453] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    19.453] (II) FBDEV: driver for framebuffer: fbdev
[    19.453] (II) VESA: driver for VESA chipsets: vesa
[    19.460] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160229
[    19.460] (II) intel(0): SNA compiled from 2.99.917-654-ga508b11
[    19.462] (WW) Falling back to old probe method for modesetting
[    19.463] (WW) Falling back to old probe method for fbdev
[    19.463] (II) Loading sub module "fbdevhw"
[    19.463] (II) LoadModule: "fbdevhw"
[    19.463] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    19.473] (II) Module fbdevhw: vendor="X.Org Foundation"
[    19.474] 	compiled for 1.18.3, module version = 0.0.2
[    19.474] 	ABI class: X.Org Video Driver, version 20.0
[    19.474] (WW) Falling back to old probe method for vesa
[    19.485] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[    19.485] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[    19.485] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    19.485] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    19.485] (==) intel(0): RGB weight 888
[    19.485] (==) intel(0): Default visual is TrueColor
[    19.485] (II) intel(0): Output LVDS1 has no monitor section
[    19.500] (--) intel(0): Found backlight control interface acpi_video1 (type 'firmware') for output LVDS1
[    19.500] (II) intel(0): Enabled output LVDS1
[    19.500] (II) intel(0): Output VGA1 has no monitor section
[    19.500] (II) intel(0): Enabled output VGA1
[    19.500] (II) intel(0): Output HDMI1 has no monitor section
[    19.500] (II) intel(0): Enabled output HDMI1
[    19.500] (II) intel(0): Output DP1 has no monitor section
[    19.500] (II) intel(0): Enabled output DP1
[    19.500] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    19.500] (II) intel(0): Output VIRTUAL1 has no monitor section
[    19.500] (II) intel(0): Enabled output VIRTUAL1
[    19.500] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[    19.500] (==) intel(0): TearFree disabled
[    19.500] (==) intel(0): DPI set to (96, 96)
[    19.500] (II) Loading sub module "dri2"
[    19.500] (II) LoadModule: "dri2"
[    19.500] (II) Module "dri2" already built-in
[    19.500] (II) Loading sub module "present"
[    19.500] (II) LoadModule: "present"
[    19.500] (II) Module "present" already built-in
[    19.500] (II) UnloadModule: "modesetting"
[    19.500] (II) Unloading modesetting
[    19.500] (II) UnloadModule: "fbdev"
[    19.500] (II) Unloading fbdev
[    19.500] (II) UnloadSubModule: "fbdevhw"
[    19.500] (II) Unloading fbdevhw
[    19.500] (II) UnloadModule: "vesa"
[    19.500] (II) Unloading vesa
[    19.500] (==) Depth 24 pixmap format is 32 bpp
[    19.566] (II) intel(0): SNA initialized with Sandybridge (gen6, gt2) backend
[    19.566] (==) intel(0): Backing store enabled
[    19.566] (==) intel(0): Silken mouse enabled
[    19.567] (II) intel(0): HW Cursor enabled
[    19.567] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    19.568] (==) intel(0): DPMS enabled
[    19.569] (==) intel(0): Display hotplug detection enabled
[    19.569] (II) intel(0): [DRI2] Setup complete
[    19.569] (II) intel(0): [DRI2]   DRI driver: i965
[    19.569] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    19.569] (II) intel(0): direct rendering: DRI2 enabled
[    19.569] (II) intel(0): hardware support for Present enabled
[    19.569] (--) RandR disabled
[    19.785] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    19.785] (II) AIGLX: enabled GLX_ARB_create_context
[    19.785] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    19.785] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    19.785] (II) AIGLX: enabled GLX_INTEL_swap_event
[    19.785] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    19.785] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    19.785] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    19.785] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    19.785] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    19.785] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    19.786] (II) AIGLX: Loaded and initialized i965
[    19.786] (II) GLX: Initialized DRI2 GL provider for screen 0
[    19.797] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    19.797] (II) intel(0): Setting screen physical size to 361 x 203
[    20.211] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    20.211] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.211] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    20.211] (II) LoadModule: "libinput"
[    20.211] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    20.244] (II) Module libinput: vendor="X.Org Foundation"
[    20.244] 	compiled for 1.18.3, module version = 0.19.0
[    20.244] 	Module class: X.Org XInput Driver
[    20.244] 	ABI class: X.Org XInput driver, version 22.1
[    20.244] (II) Using input driver 'libinput' for 'Power Button'
[    20.244] (**) Power Button: always reports core events
[    20.244] (**) Option "Device" "/dev/input/event2"
[    20.244] (**) Option "_source" "server/udev"
[    20.245] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    20.245] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    20.257] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    20.257] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.258] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    20.258] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    20.258] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    20.258] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.258] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    20.258] (II) Using input driver 'libinput' for 'Video Bus'
[    20.258] (**) Video Bus: always reports core events
[    20.258] (**) Option "Device" "/dev/input/event4"
[    20.258] (**) Option "_source" "server/udev"
[    20.259] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[    20.259] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[    20.270] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[    20.270] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    20.271] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[    20.271] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[    20.271] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    20.271] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    20.272] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    20.272] (II) Using input driver 'libinput' for 'Video Bus'
[    20.272] (**) Video Bus: always reports core events
[    20.272] (**) Option "Device" "/dev/input/event3"
[    20.272] (**) Option "_source" "server/udev"
[    20.272] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[    20.272] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[    20.283] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input3/event3"
[    20.283] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    20.284] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[    20.284] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[    20.285] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    20.285] (II) No input driver specified, ignoring this device.
[    20.285] (II) This device may have been added with another device file.
[    20.285] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    20.285] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    20.285] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    20.285] (II) Using input driver 'libinput' for 'Sleep Button'
[    20.285] (**) Sleep Button: always reports core events
[    20.285] (**) Option "Device" "/dev/input/event1"
[    20.285] (**) Option "_source" "server/udev"
[    20.286] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[    20.286] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[    20.296] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    20.296] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    20.297] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[    20.297] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[    20.299] (II) config/udev: Adding input device USB 2.0 UVC VGA WebCam (/dev/input/event12)
[    20.299] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "evdev keyboard catchall"
[    20.299] (**) USB 2.0 UVC VGA WebCam: Applying InputClass "libinput keyboard catchall"
[    20.299] (II) Using input driver 'libinput' for 'USB 2.0 UVC VGA WebCam'
[    20.299] (**) USB 2.0 UVC VGA WebCam: always reports core events
[    20.299] (**) Option "Device" "/dev/input/event12"
[    20.299] (**) Option "_source" "server/udev"
[    20.300] (II) input device 'USB 2.0 UVC VGA WebCam', /dev/input/event12 is tagged by udev as: Keyboard
[    20.300] (II) input device 'USB 2.0 UVC VGA WebCam', /dev/input/event12 is a keyboard
[    20.340] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input19/event12"
[    20.340] (II) XINPUT: Adding extended input device "USB 2.0 UVC VGA WebCam" (type: KEYBOARD, id 10)
[    20.341] (II) input device 'USB 2.0 UVC VGA WebCam', /dev/input/event12 is tagged by udev as: Keyboard
[    20.341] (II) input device 'USB 2.0 UVC VGA WebCam', /dev/input/event12 is a keyboard
[    20.342] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9)
[    20.342] (II) No input driver specified, ignoring this device.
[    20.342] (II) This device may have been added with another device file.
[    20.343] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[    20.343] (II) No input driver specified, ignoring this device.
[    20.343] (II) This device may have been added with another device file.
[    20.343] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[    20.343] (II) No input driver specified, ignoring this device.
[    20.343] (II) This device may have been added with another device file.
[    20.344] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[    20.344] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    20.344] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    20.344] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[    20.344] (**) Asus WMI hotkeys: always reports core events
[    20.344] (**) Option "Device" "/dev/input/event8"
[    20.344] (**) Option "_source" "server/udev"
[    20.345] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
[    20.345] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is a keyboard
[    20.363] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input15/event8"
[    20.363] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 11)
[    20.365] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is tagged by udev as: Keyboard
[    20.365] (II) input device 'Asus WMI hotkeys', /dev/input/event8 is a keyboard
[    20.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[    20.366] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    20.366] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    20.366] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    20.366] (**) AT Translated Set 2 keyboard: always reports core events
[    20.366] (**) Option "Device" "/dev/input/event5"
[    20.366] (**) Option "_source" "server/udev"
[    20.366] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard
[    20.367] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard
[    20.393] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[    20.393] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    20.394] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard
[    20.394] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard
[    20.395] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    20.395] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    20.395] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[    20.395] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    20.395] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    20.395] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    20.395] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchscreen catchall"
[    20.395] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    20.395] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    20.395] (**) Option "Device" "/dev/input/event7"
[    20.395] (**) Option "_source" "server/udev"
[    20.396] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is tagged by udev as: Touchpad Touchscreen
[    20.396] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is a touchpad
[    20.430] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event7"
[    20.430] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[    20.430] (**) Option "AccelerationScheme" "none"
[    20.430] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    20.430] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    20.430] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    20.431] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is tagged by udev as: Touchpad Touchscreen
[    20.431] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event7 is a touchpad
[    20.432] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    20.432] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    20.433] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    20.433] (II) No input driver specified, ignoring this device.
[    20.433] (II) This device may have been added with another device file.
[    21.500] (II) intel(0): EDID vendor "AUO", prod id 9964
[    21.500] (II) intel(0): Printing DDC gathered Modelines:
[    21.500] (II) intel(0): Modeline "1366x768"x0.0   71.80  1366 1414 1446 1526  768 771 777 784 -hsync -vsync (47.1 kHz eP)
[   135.428] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[   136.196] (II) intel(0): resizing framebuffer to 864x486

safocl	# 6 лет, 2 месяца назад
Темы: 121 Сообщения: 1570 Участник с: 08 октября 2015	народ.... короче... без конфигов все нормально работает... я так понимаю какая то ошибка в них была, наверно частоту сильно большую вертикальной развертки выбрал для лаптопного моника... сарян за сабж, каюсь...