cups не видит принтера

Bus 002 Device 003: ID 058f:6377 Alcor Micro Corp. AU6375 4-LUN card reader
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 001 Device 005: ID 0482:0493 Kyocera Corp.
Bus 001 Device 003: ID 046d:c31f Logitech, Inc.
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

[   41.221805] cfg80211: Calling CRDA to update world regulatory domain
[   44.368404] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[  345.119964] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[  345.275974] usblp 1-1.4:1.0: usblp2: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0482 pid 0x0493
[  345.276004] usbcore: registered new interface driver usblp

ATTR{idVendor}=="0482", ATTR{idProduct}=="0493", MODE:="0666", GROUP:="lp"

noideal
Kyocera FS 1040. С поддержкой LInux проблем нет

noideal
Может нужен другой CUPS?

noideal
пробовал игнорировать модуль usblp добавлением в rc.conf блока MODULES=(!usblp)

Aivar
И конечно же вы сглупили, поставив драйвер помимо пакетного менеджера.
Это пробовали?

DEBUG: Loading USB quirks from "/usr/share/cups/usb".
DEBUG: Loaded 72 quirks.
DEBUG: list_devices
DEBUG: libusb_get_device_list=8
DEBUG2: Printer found with device ID: MFG:Kyocera;MDL:FS-1040;CLS:PRINTER;SN:V234420527;CID:KY_KPSL_MonoPersonal; Device URI: usb://Kyocera/FS-1040?serial=V234420527
direct usb://Kyocera/FS-1040?serial=V234420527 "Kyocera FS-1040" "Kyocera FS-1040" "MFG:Kyocera;MDL:FS-1040;CLS:PRINTER;SN:V234420527;CID:KY_KPSL_MonoPersonal;" ""

Known Issues/limitations:
-OpenOffice and LibreOffice doesnft work properly with the GDI filter,
the application bypasses the filter, it is possible to print but
advanced features do not work. AbiWord does work properly with the GDI
driver.
- Adobe Acrobat Reader: When printing odd number pages with duplex on,
the last page will still go through duplexer, while in other
applications the last page will be print out in simplex way.
- Duplexing mixed paper sizes: If the print job has mixed paper sizes
or mixed orientations, print job will be spitted and will print as
simplex at where the mix happens.
- Adobe Acrobat Reader: Print will fail if set page orientation as
Landscape, use gSystem - Administration - Printingh to set paper
orientation and be able to send a job as Landscape.
- Adobe Acrobat Reader, OpenOffice and LibreOffice do not support
properly custom paper size, these applications do not use the CUPS
print dialog box interface and for this reason custom paper size canft
be supported, applications that use the CUPS print dialog box can
support custom paper size.
-Duplex: When using a paper size that has constraint against Duplex the
UI for Duplex will not display Long Edge as a selectable option.
-Document Viewer and Okular: When using a .pdf test file that is heavy
in graphics and produces big printable data the Document Viewer or
Okular will not process properly the printable data for the GDI driver
causing incorrect output (Acrobat Reader doesnft have this problem). In
some cases updating to latest version of Document Viewer or Okular may
help to get better output.

Velesich
1. Это GDI принтер, т.е. безмозглый и потому дешевый.
2. С тем, что устанавливается с сидюка, приложенного к принтеру, система принтер видит, но: