lm_sensors перестал определять температуру материнской платы

[[email protected] vadim]# sensors-detect
# sensors-detect revision 6209 (2014-01-14 22:51:58 +0100)
# System: SAMSUNG ELECTRONICS CO., LTD. R518 [Not Applicable] (laptop)

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595...                       No
VIA VT82C686 Integrated Sensors...                          No
VIA VT8231 Integrated Sensors...                            No
AMD K8 thermal sensors...                                   No
AMD Family 10h thermal sensors...                           No
AMD Family 11h thermal sensors...                           No
AMD Family 12h and 14h thermal sensors...                   No
AMD Family 15h thermal sensors...                           No
AMD Family 15h power sensors...                             No
AMD Family 16h power sensors...                             No
Intel digital thermal sensor...                             Success!
    (driver `coretemp')
Intel AMB FB-DIMM thermal sensor...                         No
VIA C7 thermal sensor...                                    No
VIA Nano thermal sensor...                                  No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'...               No
Trying family `SMSC'...                                     No
Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
Trying family `ITE'...                                      No

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290...       No
Probing for `National Semiconductor LM79' at 0x290...       No
Probing for `Winbond W83781D' at 0x290...                   No
Probing for `Winbond W83782D' at 0x290...                   No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9
Module i2c-dev loaded successfully.

Next adapter: i915 gmbus ssc (i2c-0)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: i915 gmbus vga (i2c-1)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: i915 gmbus panel (i2c-2)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: i915 gmbus dpc (i2c-3)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: i915 gmbus dpb (i2c-4)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: i915 gmbus dpd (i2c-5)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: DPDDC-B (i2c-6)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: DPDDC-C (i2c-7)
Do you want to scan it? (yes/NO/selectively): yes

Next adapter: DPDDC-D (i2c-8)
Do you want to scan it? (yes/NO/selectively): yes
Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `coretemp':
  * Chip `Intel digital thermal sensor' (confidence: 9)

Do you want to overwrite /etc/conf.d/lm_sensors? (YES/no):
Unloading i2c-dev... OK
Unloading cpuid... OK

[[email protected] vadim]#

# Generated by sensors-detect on Thu Oct 16 00:58:41 2014
# This file is sourced by /etc/init.d/lm_sensors and defines the modules to
# be loaded/unloaded.
#
# The format of this file is a shell script that simply defines variables:
# HWMON_MODULES for hardware monitoring driver modules, and optionally
# BUS_MODULES for any required bus driver module (for example for I2C or SPI).

HWMON_MODULES="coretemp"

Vadim_BZ
nafanja, а потом что? Не комфильно же сидеть на старом ядре :)

Vadim_BZ
Intel digital thermal sensor... Success! (driver `coretemp')

[[email protected] ~]$ systemctl status lm_sensors
● lm_sensors.service - Initialize hardware monitoring sensors
   Loaded: loaded (/usr/lib/systemd/system/lm_sensors.service; enabled)
   Active: active (exited) since Чт 2014-10-16 03:32:18 YEKT; 1min 19s ago
  Process: 247 ExecStart=/usr/bin/sensors -s (code=exited, status=0/SUCCESS)
  Process: 210 ExecStart=/sbin/modprobe -qab $BUS_MODULES $HWMON_MODULES (code=exited, status=0/SUCCESS)
 Main PID: 247 (code=exited, status=0/SUCCESS)
[[email protected] ~]$

[[email protected] ~]$ acpi -t
bash: acpi: команда не найдена
[[email protected] ~]$

[[email protected] ~]$ lsmod |grep i2c
i2c_i801               11364  0
i2c_algo_bit            5480  1 i915
i2c_core               25400  5 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit
[[email protected] ~]$