Умирает винт?

vasek
8 лет, 7 месяцев назад
Темы: 48
Сообщения: 11340
Участник с: 17 февраля 2013
Почему прервал полный тест? - или я не прав?
Ошибки не исчезают с опытом - они просто умнеют
brestows
8 лет, 7 месяцев назад
brestows avatar
Темы: 24
Сообщения: 189
Участник с: 06 апреля 2013
не прерывал, хотя могла кошка прервать :) меня не было за компом во время теста, она либит reset жать прыгая на системник :(
kdeneur: https://github.com/brestows/kdeNeur
awesome WM 3.5
vasek
8 лет, 7 месяцев назад
Темы: 48
Сообщения: 11340
Участник с: 17 февраля 2013
S.M.A.R.T. особо, вообщем то и верить не стоит, это так, первичный анализ, на скорую руку.
На форуме про проверку винтов уже не раз писали (с указанием утилит), поищи.
А так на скорую руку можешь еще проверить - упоминается ли слово failing (что то похожее, точно не помню) в выводе
$ sudo smartctl -Hc /dev/sda
В этом же выводе должна быть и информация о предыдущем тесте.
PS..........типа такого у меня
Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.

PSS.... насчет failing - у меня вот так
SMART overall-health self-assessment test result: PASSED
Ошибки не исчезают с опытом - они просто умнеют
brestows
8 лет, 7 месяцев назад
brestows avatar
Темы: 24
Сообщения: 189
Участник с: 06 апреля 2013
вот результат команды smartctl -Hc /dev/sdс:

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.12.7-1-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (  40)	The self-test routine was interrupted
					by the host with a hard or soft reset.
Total time to complete Offline
data collection: 		( 9300) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 155) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.
kdeneur: https://github.com/brestows/kdeNeur
awesome WM 3.5
vasek
8 лет, 7 месяцев назад
Темы: 48
Сообщения: 11340
Участник с: 17 февраля 2013
Self-test execution status: ( 40) The self-test routine was interrupted by the host with a hard or soft reset.
Видишь - тестирование было прервано. Для успокоения совести проделай его до конца - тебе пишут, что потребуется 155 мин.
А там посмотришь, что покажет.
Ошибки не исчезают с опытом - они просто умнеют
brestows
8 лет, 7 месяцев назад
brestows avatar
Темы: 24
Сообщения: 189
Участник с: 06 апреля 2013
т.е. запускаю тест (sudo smartctl --test=long /dev/sdс) через 3 часа смотрю результаты по smartctl -Hc /dev/sdс ?
kdeneur: https://github.com/brestows/kdeNeur
awesome WM 3.5
lampslave
8 лет, 7 месяцев назад
Темы: 32
Сообщения: 4801
Участник с: 05 июля 2011
gsmartcontrol поставьте для наглядности.
vasek
8 лет, 7 месяцев назад
Темы: 48
Сообщения: 11340
Участник с: 17 февраля 2013
brestows, да lampslave тебе хорошую идею подсказал, для тебя gsmartcontrol будет самое то.
Ошибки не исчезают с опытом - они просто умнеют
brestows
8 лет, 7 месяцев назад
brestows avatar
Темы: 24
Сообщения: 189
Участник с: 06 апреля 2013
вообщем вот результаты теста
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.12.7-1-ARCH] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F3
Device Model:     SAMSUNG HD103SJ
Serial Number:    S246JDWSC34540
LU WWN Device Id: 5 0024e9 002a0580e
Firmware Version: 1AJ100E4
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sun Jan 19 10:40:05 2014 FET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 116)	The previous self-test completed having
					the read element of the test failed.
Total time to complete Offline
data collection: 		( 9300) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 155) minutes.
SCT capabilities: 	       (0x003f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       120
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   073   071   025    Pre-fail  Always       -       8369
  4 Start_Stop_Count        0x0032   099   099   000    Old_age   Always       -       1286
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       22207
 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   252   252   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1260
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       75
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   059   051   000    Old_age   Always       -       41 (Min/Max 14/49)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       3
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   100   100   000    Old_age   Always       -       153
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       4
223 Load_Retry_Count        0x0032   252   252   000    Old_age   Always       -       0
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1369
SMART Error Log Version: 1
ATA Error Count: 23 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 23 occurred at disk power-on lifetime: 10766 hours (448 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:00:00.951  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 00      00:00:00.951  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      00:00:00.951  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      00:00:00.951  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:00.951  IDENTIFY DEVICE
Error 22 occurred at disk power-on lifetime: 10766 hours (448 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:00:00.938  IDENTIFY DEVICE
  00 10 f0 1a 91 19 40 00      00:00:00.938  NOP [Reserved subcommand] [OBS-ACS-2]
  60 10 00 0a 91 19 40 00      00:00:00.938  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00      00:00:00.938  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      00:00:00.938  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 21 occurred at disk power-on lifetime: 10766 hours (448 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:00:00.587  IDENTIFY DEVICE
  00 10 00 12 53 ec 40 00      00:00:00.587  NOP [Reserved subcommand] [OBS-ACS-2]
  00 10 00 12 52 ec 40 00      00:00:00.587  NOP [Reserved subcommand] [OBS-ACS-2]
  ec 00 00 00 00 00 a0 00      00:00:00.582  IDENTIFY DEVICE
  00 10 00 fa e4 ea 40 00      00:00:00.582  NOP [Reserved subcommand] [OBS-ACS-2]
Error 20 occurred at disk power-on lifetime: 10766 hours (448 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:00:00.421  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 00      00:00:00.421  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      00:00:00.421  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      00:00:00.421  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:00.421  IDENTIFY DEVICE
Error 19 occurred at disk power-on lifetime: 10766 hours (448 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.
  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  84 51 00 00 00 00 a0
  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ec 00 00 00 00 00 a0 00      00:00:00.406  IDENTIFY DEVICE
  ef 03 42 00 00 00 a0 00      00:00:00.406  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      00:00:00.406  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00      00:00:00.406  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00      00:00:00.406  IDENTIFY DEVICE
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed: read failure       40%     22197         1389062303
# 2  Extended offline    Interrupted (host reset)      80%     22171         -
# 3  Short offline       Completed without error       00%     10892         -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed_read_failure [40% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
kdeneur: https://github.com/brestows/kdeNeur
awesome WM 3.5
vasek
8 лет, 7 месяцев назад
Темы: 48
Сообщения: 11340
Участник с: 17 февраля 2013
brestows Как видишь результат не утешительный - LBA_of_first_error - 1389062303
Думаю все понятно. Дальше анализируй сам.
Ошибки не исчезают с опытом - они просто умнеют
 
Зарегистрироваться или войдите чтобы оставить сообщение.

© 2006-2022, Русскоязычное сообщество Arch Linux.
Название и логотип Arch Linux ™ являются признанными торговыми марками.
Linux ® — зарегистрированная торговая марка Linus Torvalds и LMI.