"Не виноватая я" (С) - поломался после обновления

marlock
9 лет, 3 месяца назад
Темы: 35
Сообщения: 736
Участник с: 02 июля 2010
У меня не так давно была такая же фигня.
При выключении вываливало ошибку ядра, во время работы отрубалась система.
Для себя решил сборкой собственного ядра linux-pf из yaourt. И быстрее работать стал, и стабильнее.
vasek
9 лет, 3 месяца назад
Темы: 48
Сообщения: 11320
Участник с: 17 февраля 2013
Если нашел кучу логов, то может быть есть и Xorg.0.log - посмотри. На этих фотках вообще ничего не видно. Увидел только начало фразы, но догадаться можно - Fixing recursive fault but reboot is needed А к этому нужно еще бы чуть чуть информации - а так вариантов много.
Ошибки не исчезают с опытом - они просто умнеют
Natrio
9 лет, 3 месяца назад
Темы: 47
Сообщения: 4763
Участник с: 08 января 2011
Логи заканчиваются последним нормальным выключением, падание при старте в них не попало.
Фото экрана отвратительные, но на них кое-как читается временная отметка – больше 8 секунд от запуска ядра. Вопрос: что происходит ДО ЭТОГО, все эти 8 секунд? После чего происходит падение? Если это не полное падение ядра, вы не пробовали прокрутить экран экран назад клавишами Shift+PageUp/PageDown ?

Подсказка – в загрузчике перед стартом можно изменить параметры ядра на текущий запуск. Уберите оттуда quiet и напишите вместо этого loglevel=6 , чтобы видеть, что происходит при загрузке.
vasek
9 лет, 3 месяца назад
Темы: 48
Сообщения: 11320
Участник с: 17 февраля 2013
Natrio
Логи заканчиваются последним нормальным выключением, падание при старте в них не попало.
Фото экрана отвратительные, но на них кое-как читается временная отметка – больше 8 секунд от запуска ядра. Вопрос: что происходит ДО ЭТОГО, все эти 8 секунд? После чего происходит падение? Если это не полное падение ядра, вы не пробовали прокрутить экран экран назад клавишами Shift+PageUp/PageDown ?

Подсказка – в загрузчике перед стартом можно изменить параметры ядра на текущий запуск. Уберите оттуда quiet и напишите вместо этого loglevel=6 , чтобы видеть, что происходит при загрузке.

Это я понял, что логи последней удачной загрузки. Только я не пойму, откуда у него эти файлы? Он что испоьзует syslog? А фото можно и лучше бы сделать.
А для информативности я обычно испоьзую по максимуму log_level=debug
Ошибки не исчезают с опытом - они просто умнеют
vasek
9 лет, 3 месяца назад
Темы: 48
Сообщения: 11320
Участник с: 17 февраля 2013
Natrio - виноват, как всегда, не вдумаюсь и напишу - только сейчас дошло, что это одно и то же (6 - наивысший уровень)
Ошибки не исчезают с опытом - они просто умнеют
Natrio
9 лет, 3 месяца назад
Темы: 47
Сообщения: 4763
Участник с: 08 января 2011
vasek, debug всегда был номер 7, но у меня всегда включён шестой левел (info). Хотя в целях отладки можно включить и седьмой.
vasek
9 лет, 3 месяца назад
Темы: 48
Сообщения: 11320
Участник с: 17 февраля 2013
Natrio
vasek, debug всегда был номер 7, но у меня всегда включён шестой левел (info). Хотя в целях отладки можно включить и седьмой.

Что то я совсем затупил - почему то показалось, что отчет идет от 0.
Давно все это не смотрел, уже все забылось.
Спасибо, за разъяснение - правда, не буду долго использовать, опять все забуду - а посмотреть мне было все таки лень (бяка я, каюсь)
Ошибки не исчезают с опытом - они просто умнеют
vasek
9 лет, 3 месяца назад
Темы: 48
Сообщения: 11320
Участник с: 17 февраля 2013
Мне однажды (и всего лишь единственный раз) помогла следующая штука, взятая из suse (очень хорошая статья, часто ее читаю)
......Диагностика проблем загрузки
.....
Если Вы не получили приглашение для входа, тогда попробуйте переключиться в другую виртуальную консоль с помощью комбинации клавиш Ctrl+Alt+F<цифра>.
Если же Вы не можете войти ни в одну из виртуальных консолей, тогда попробуйте войти через => 5 мин. Существует вероятность того, что проблемные службы будут остановлены после этого тайм-аута и загрузка продолжится.
.........................
PS - но это, как мне кажется, не для этого случая
Ошибки не исчезают с опытом - они просто умнеют
yaa
9 лет, 3 месяца назад
Темы: 23
Сообщения: 170
Участник с: 30 декабря 2011
Всем спасибо за участие.

vasek
Если нашел кучу логов, то может быть есть и Xorg.0.log - посмотри.
Так, начинаю исправляться

[    30.760]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[    30.760] X Protocol Version 11, Revision 0
[    30.760] Build Operating System: Linux 3.8.7-1-ARCH i686
[    30.760] Current Operating System: Linux pampas 3.8.11-1-ARCH #1 SMP PREEMPT Thu May 2 17:52:13 CEST 2013 i686
[    30.761] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=89078c03-6fc4-4667-850d-0bf4957c889a ro quiet
[    30.761] Build Date: 17 April 2013  02:43:06PM
[    30.761]
[    30.761] Current version of pixman: 0.30.0
[    30.761] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    30.761] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.762] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 12 21:20:04 2013
[    30.846] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    30.846] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    30.868] (==) No Layout section.  Using the first Screen section.
[    30.868] (==) No screen section available. Using defaults.
[    30.868] (**) |-->Screen "Default Screen Section" (0)
[    30.868] (**) |   |-->Monitor "<default monitor>"
[    30.885] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    30.885] (==) Automatically adding devices
[    30.885] (==) Automatically enabling devices
[    30.885] (==) Automatically adding GPU devices
[    30.919] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    30.920] 	Entry deleted from font path.
[    30.957] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    30.957] (==) ModulePath set to "/usr/lib/xorg/modules"
[    30.957] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    30.957] (II) Loader magic: 0x8258620
[    30.957] (II) Module ABI versions:
[    30.957] 	X.Org ANSI C Emulation: 0.4
[    30.957] 	X.Org Video Driver: 14.1
[    30.957] 	X.Org XInput driver : 19.1
[    30.957] 	X.Org Server Extension : 7.0
[    30.958] (II) config/udev: Adding drm device (/dev/dri/card0)
[    30.962] (--) PCI: (0:1:2:0) 4444:0016:1461:c136 rev 1, Mem @ 0xb8000000/67108864
[    30.962] (--) PCI:*(0:6:0:0) 1002:71c5:1043:10b2 rev 0, Mem @ 0xc0000000/268435456, 0xfe0f0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[    30.962] Initializing built-in extension Generic Event Extension
[    30.962] Initializing built-in extension SHAPE
[    30.963] Initializing built-in extension MIT-SHM
[    30.963] Initializing built-in extension XInputExtension
[    30.963] Initializing built-in extension XTEST
[    30.966] Initializing built-in extension BIG-REQUESTS
[    30.968] Initializing built-in extension SYNC
[    30.970] Initializing built-in extension XKEYBOARD
[    30.972] Initializing built-in extension XC-MISC
[    30.974] Initializing built-in extension SECURITY
[    30.976] Initializing built-in extension XINERAMA
[    30.978] Initializing built-in extension XFIXES
[    30.980] Initializing built-in extension RENDER
[    30.982] Initializing built-in extension RANDR
[    30.983] Initializing built-in extension COMPOSITE
[    30.985] Initializing built-in extension DAMAGE
[    30.987] Initializing built-in extension MIT-SCREEN-SAVER
[    30.988] Initializing built-in extension DOUBLE-BUFFER
[    30.990] Initializing built-in extension RECORD
[    30.992] Initializing built-in extension DPMS
[    30.993] Initializing built-in extension X-Resource
[    30.995] Initializing built-in extension XVideo
[    30.996] Initializing built-in extension XVideo-MotionCompensation
[    30.998] Initializing built-in extension XFree86-VidModeExtension
[    31.000] Initializing built-in extension XFree86-DGA
[    31.001] Initializing built-in extension XFree86-DRI
[    31.003] Initializing built-in extension DRI2
[    31.003] (II) "glx" will be loaded by default.
[    31.003] (II) LoadModule: "dri2"
[    31.003] (II) Module "dri2" already built-in
[    31.003] (II) LoadModule: "glamoregl"
[    31.027] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    31.225] (II) Module glamoregl: vendor="X.Org Foundation"
[    31.225] 	compiled for 1.14.0, module version = 0.5.0
[    31.225] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.225] (II) LoadModule: "glx"
[    31.225] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    31.254] (II) Module glx: vendor="X.Org Foundation"
[    31.254] 	compiled for 1.14.1, module version = 1.0.0
[    31.254] 	ABI class: X.Org Server Extension, version 7.0
[    31.254] (==) AIGLX enabled
[    31.257] Loading extension GLX
[    31.257] (==) Matched ati as autoconfigured driver 0
[    31.257] (==) Matched ati as autoconfigured driver 1
[    31.257] (==) Matched vesa as autoconfigured driver 2
[    31.257] (==) Matched modesetting as autoconfigured driver 3
[    31.257] (==) Matched fbdev as autoconfigured driver 4
[    31.257] (==) Assigned the driver to the xf86ConfigLayout
[    31.257] (II) LoadModule: "ati"
[    31.257] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[    31.273] (II) Module ati: vendor="X.Org Foundation"
[    31.273] 	compiled for 1.14.0, module version = 7.1.0
[    31.273] 	Module class: X.Org Video Driver
[    31.273] 	ABI class: X.Org Video Driver, version 14.1
[    31.273] (II) LoadModule: "radeon"
[    31.274] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[    31.301] (II) Module radeon: vendor="X.Org Foundation"
[    31.301] 	compiled for 1.14.0, module version = 7.1.0
[    31.301] 	Module class: X.Org Video Driver
[    31.301] 	ABI class: X.Org Video Driver, version 14.1
[    31.301] (II) LoadModule: "vesa"
[    31.301] (WW) Warning, couldn't open module vesa
[    31.301] (II) UnloadModule: "vesa"
[    31.301] (II) Unloading vesa
[    31.301] (EE) Failed to load module "vesa" (module does not exist, 0)
[    31.301] (II) LoadModule: "modesetting"
[    31.302] (WW) Warning, couldn't open module modesetting
[    31.302] (II) UnloadModule: "modesetting"
[    31.302] (II) Unloading modesetting
[    31.302] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    31.302] (II) LoadModule: "fbdev"
[    31.302] (WW) Warning, couldn't open module fbdev
[    31.302] (II) UnloadModule: "fbdev"
[    31.303] (II) Unloading fbdev
[    31.303] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    31.303] (II) RADEON: Driver for ATI Radeon chipsets:
	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
	ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
	ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835,
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE),
	ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE),
	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
	ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
	ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
	ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
	ATI Mobility Radeon HD 4670, ATI FirePro M5750,
	ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
	ATI Mobility Radeon HD 3850 X2, ATI RV670,
	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
	ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
	ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
	ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
	ATI FireGL V3600, ATI Radeon HD 2600 LE,
	ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
	ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
	ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
	ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
	ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
	ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
	ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
	ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
	ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
	ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
	ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
	SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
	ATI Radeon 4100, ATI Mobility Radeon HD 4200,
	ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
	AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
	AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
	AMD Radeon HD 6300 Series Graphics,
	AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
	AMD Firestream 9350, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
	ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
	ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
	ATI Mobility Radeon HD 5800 Series,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
	ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
	ATI Mobility Radeon HD 5000 Series,
	ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
	ATI Mobility Radeon Graphics, CEDAR,
	ATI FirePro (FireGL) Graphics Adapter,
	ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
	ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
	AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
	CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
	BARTS, BARTS, Mobility Radeon HD 6000 Series,
	Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
	AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
	AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
	CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
	ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
	TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN,
	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
	PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
	VERDE, VERDE, VERDE, VERDE, VERDE, VERDE
[    31.311] (++) using VT number 1
[    31.319] (II) [KMS] Kernel modesetting enabled.
[    31.319] (II) RADEON(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    31.319] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[    31.319] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    31.319] (==) RADEON(0): Default visual is TrueColor
[    31.319] (==) RADEON(0): RGB weight 888
[    31.319] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[    31.319] (--) RADEON(0): Chipset: "ATI Mobility Radeon X1600" (ChipID = 0x71c5)
[    31.319] (II) Loading sub module "dri2"
[    31.319] (II) LoadModule: "dri2"
[    31.319] (II) Module "dri2" already built-in
[    31.319] (II) Loading sub module "exa"
[    31.319] (II) LoadModule: "exa"
[    31.319] (II) Loading /usr/lib/xorg/modules/libexa.so
[    31.327] (II) Module exa: vendor="X.Org Foundation"
[    31.327] 	compiled for 1.14.1, module version = 2.6.0
[    31.327] 	ABI class: X.Org Video Driver, version 14.1
[    31.327] (II) RADEON(0): KMS Color Tiling: enabled
[    31.327] (II) RADEON(0): KMS Color Tiling 2D: disabled
[    31.327] (II) RADEON(0): KMS Pageflipping: enabled
[    31.327] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[    31.387] (II) RADEON(0): Output VGA-0 has no monitor section
[    31.387] (II) RADEON(0): Output LVDS has no monitor section
[    31.447] (II) RADEON(0): Output S-video has no monitor section
[    31.449] (II) RADEON(0): Output DVI-0 has no monitor section
[    31.510] (II) RADEON(0): EDID for output VGA-0
[    31.510] (II) RADEON(0): EDID for output LVDS
[    31.510] (II) RADEON(0): Manufacturer: AUO  Model: 1101  Serial#: 0
[    31.510] (II) RADEON(0): Year: 2004  Week: 1
[    31.510] (II) RADEON(0): EDID Version: 1.2
[    31.510] (II) RADEON(0): Digital Display Input
[    31.510] (II) RADEON(0): Max Image Size [cm]: horiz.: 37  vert.: 23
[    31.510] (II) RADEON(0): Gamma: 2.20
[    31.510] (II) RADEON(0): No DPMS capabilities specified
[    31.510] (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    31.510] (II) RADEON(0): First detailed timing is preferred mode
[    31.510] (II) RADEON(0): redX: 0.609 redY: 0.350   greenX: 0.300 greenY: 0.560
[    31.510] (II) RADEON(0): blueX: 0.139 blueY: 0.139   whiteX: 0.319 whiteY: 0.329
[    31.510] (II) RADEON(0): Manufacturer's mask: 0
[    31.510] (II) RADEON(0): Supported detailed timing:
[    31.510] (II) RADEON(0): clock: 96.3 MHz   Image Size:  367 x 230 mm
[    31.511] (II) RADEON(0): h_active: 1440  h_sync: 1504  h_sync_end 1536 h_blank_end 1760 h_border: 0
[    31.511] (II) RADEON(0): v_active: 900  v_sync: 903  v_sync_end 906 v_blanking: 912 v_border: 0
[    31.511] (II) RADEON(0): Unknown vendor-specific block f
[    31.511] (II) RADEON(0):  AUO
[    31.511] (II) RADEON(0):  B170PW01 V.1
[    31.511] (II) RADEON(0): EDID (in hex):
[    31.511] (II) RADEON(0): 	00ffffffffffff0006af011100000000
[    31.511] (II) RADEON(0): 	010e0102802517780a2dad9c594c8f23
[    31.511] (II) RADEON(0): 	23515400000001010101010101010101
[    31.511] (II) RADEON(0): 	0101010101019e25a04051840c304020
[    31.511] (II) RADEON(0): 	33006fe6100000180000000f00423137
[    31.511] (II) RADEON(0): 	305057303120562e3102000000fe0041
[    31.511] (II) RADEON(0): 	554f0a202020202020202020000000fe
[    31.511] (II) RADEON(0): 	00423137305057303120562e310a00f2
[    31.511] (II) RADEON(0): Printing probed modes for output LVDS
[    31.511] (II) RADEON(0): Modeline "1440x900"x60.0   96.30  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[    31.511] (II) RADEON(0): Modeline "1280x854"x59.9   89.25  1280 1352 1480 1680  854 857 867 887 -hsync +vsync (53.1 kHz)
[    31.511] (II) RADEON(0): Modeline "1280x800"x59.8   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
[    31.511] (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
[    31.511] (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
[    31.511] (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[    31.511] (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[    31.511] (II) RADEON(0): Modeline "848x480"x59.7   31.50  848 872 952 1056  480 483 493 500 -hsync +vsync (29.8 kHz)
[    31.511] (II) RADEON(0): Modeline "720x480"x59.7   26.75  720 744 808 896  480 483 493 500 -hsync +vsync (29.9 kHz)
[    31.511] (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[    31.570] (II) RADEON(0): EDID for output S-video
[    31.574] (II) RADEON(0): EDID for output DVI-0
[    31.574] (II) RADEON(0): Output VGA-0 disconnected
[    31.574] (II) RADEON(0): Output LVDS connected
[    31.574] (II) RADEON(0): Output S-video disconnected
[    31.574] (II) RADEON(0): Output DVI-0 disconnected
[    31.574] (II) RADEON(0): Using exact sizes for initial modes
[    31.574] (II) RADEON(0): Output LVDS using initial mode 1440x900
[    31.574] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    31.574] (II) RADEON(0): mem size init: gart size :1fdff000 vram size: s:10000000 visible:fab2000
[    31.574] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[    31.574] (==) RADEON(0): DPI set to (96, 96)
[    31.575] (II) Loading sub module "fb"
[    31.575] (II) LoadModule: "fb"
[    31.575] (II) Loading /usr/lib/xorg/modules/libfb.so
[    31.583] (II) Module fb: vendor="X.Org Foundation"
[    31.583] 	compiled for 1.14.1, module version = 1.0.0
[    31.583] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    31.583] (II) Loading sub module "ramdac"
[    31.583] (II) LoadModule: "ramdac"
[    31.583] (II) Module "ramdac" already built-in
[    31.583] (--) Depth 24 pixmap format is 32 bpp
[    31.597] (II) RADEON(0): [DRI2] Setup complete
[    31.597] (II) RADEON(0): [DRI2]   DRI driver: r300
[    31.597] (II) RADEON(0): [DRI2]   VDPAU driver: r300
[    31.597] (II) RADEON(0): Front buffer size: 5244K
[    31.598] (II) RADEON(0): VRAM usage limit set to 226292K
[    31.599] (==) RADEON(0): Backing store disabled
[    31.599] (II) RADEON(0): Direct rendering enabled
[    31.599] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[    31.599] (II) EXA(0): Driver allocated offscreen pixmaps
[    31.599] (II) EXA(0): Driver registered support for the following operations:
[    31.599] (II)         Solid
[    31.599] (II)         Copy
[    31.599] (II)         Composite (RENDER acceleration)
[    31.599] (II)         UploadToScreen
[    31.599] (II)         DownloadFromScreen
[    31.599] (II) RADEON(0): Acceleration enabled
[    31.599] (==) RADEON(0): DPMS enabled
[    31.599] (==) RADEON(0): Silken mouse enabled
[    31.599] (II) RADEON(0): Set up textured video
[    31.599] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[    31.599] (II) RADEON(0): [XvMC] Extension initialized.
[    31.599] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    31.601] (--) RandR disabled
[    32.256] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    32.256] (II) AIGLX: enabled GLX_INTEL_swap_event
[    32.256] (II) AIGLX: enabled GLX_ARB_create_context
[    32.256] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    32.256] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    32.256] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    32.256] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    32.258] (II) AIGLX: Loaded and initialized r300
[    32.258] (II) GLX: Initialized DRI2 GL provider for screen 0
[    32.260] (II) RADEON(0): Setting screen physical size to 380 x 238
[    32.818] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    32.818] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.819] (II) LoadModule: "evdev"
[    32.819] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    32.877] (II) Module evdev: vendor="X.Org Foundation"
[    32.877] 	compiled for 1.14.0, module version = 2.8.0
[    32.877] 	Module class: X.Org XInput Driver
[    32.877] 	ABI class: X.Org XInput driver, version 19.1
[    32.877] (II) Using input driver 'evdev' for 'Power Button'
[    32.877] (**) Power Button: always reports core events
[    32.877] (**) evdev: Power Button: Device: "/dev/input/event4"
[    32.877] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.877] (--) evdev: Power Button: Found keys
[    32.877] (II) evdev: Power Button: Configuring as keyboard
[    32.877] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    32.878] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.878] (**) Option "xkb_rules" "evdev"
[    32.878] (**) Option "xkb_model" "evdev"
[    32.878] (**) Option "xkb_layout" "us"
[    32.917] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    32.917] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    32.917] (II) Using input driver 'evdev' for 'Video Bus'
[    32.917] (**) Video Bus: always reports core events
[    32.917] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    32.917] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    32.917] (--) evdev: Video Bus: Found keys
[    32.917] (II) evdev: Video Bus: Configuring as keyboard
[    32.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5/event5"
[    32.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    32.918] (**) Option "xkb_rules" "evdev"
[    32.918] (**) Option "xkb_model" "evdev"
[    32.918] (**) Option "xkb_layout" "us"
[    32.918] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.918] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    32.918] (II) Using input driver 'evdev' for 'Power Button'
[    32.918] (**) Power Button: always reports core events
[    32.918] (**) evdev: Power Button: Device: "/dev/input/event3"
[    32.918] (--) evdev: Power Button: Vendor 0 Product 0x1
[    32.918] (--) evdev: Power Button: Found keys
[    32.918] (II) evdev: Power Button: Configuring as keyboard
[    32.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    32.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    32.918] (**) Option "xkb_rules" "evdev"
[    32.918] (**) Option "xkb_model" "evdev"
[    32.918] (**) Option "xkb_layout" "us"
[    32.919] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    32.919] (II) No input driver specified, ignoring this device.
[    32.919] (II) This device may have been added with another device file.
[    32.919] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    32.919] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    32.919] (II) Using input driver 'evdev' for 'Sleep Button'
[    32.920] (**) Sleep Button: always reports core events
[    32.920] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    32.920] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    32.920] (--) evdev: Sleep Button: Found keys
[    32.920] (II) evdev: Sleep Button: Configuring as keyboard
[    32.920] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    32.920] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    32.920] (**) Option "xkb_rules" "evdev"
[    32.920] (**) Option "xkb_model" "evdev"
[    32.920] (**) Option "xkb_layout" "us"
[    32.920] (II) config/udev: Adding drm device (/dev/dri/card0)
[    32.921] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[    32.921] (II) No input driver specified, ignoring this device.
[    32.921] (II) This device may have been added with another device file.
[    32.921] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event8)
[    32.921] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[    32.921] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    32.921] (**) A4TECH USB Device: always reports core events
[    32.921] (**) evdev: A4TECH USB Device: Device: "/dev/input/event8"
[    32.921] (II) evdev: A4TECH USB Device: Using mtdev for this device
[    32.921] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[    32.922] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[    32.922] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    32.922] (--) evdev: A4TECH USB Device: Found relative axes
[    32.922] (--) evdev: A4TECH USB Device: Found absolute axes
[    32.922] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
[    32.922] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[    32.922] (--) evdev: A4TECH USB Device: Found keys
[    32.922] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
[    32.922] (II) evdev: A4TECH USB Device: Configuring as mouse
[    32.922] (II) evdev: A4TECH USB Device: Configuring as keyboard
[    32.922] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    32.922] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    32.922] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.922] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.0/input/input8/event8"
[    32.922] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 10)
[    32.922] (**) Option "xkb_rules" "evdev"
[    32.922] (**) Option "xkb_model" "evdev"
[    32.922] (**) Option "xkb_layout" "us"
[    32.922] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    32.922] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[    32.922] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    32.922] (**) A4TECH USB Device: (accel) acceleration profile 0
[    32.922] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    32.922] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    32.923] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[    32.923] (II) No input driver specified, ignoring this device.
[    32.923] (II) This device may have been added with another device file.
[    32.923] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event9)
[    32.923] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[    32.923] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[    32.923] (**) A4TECH USB Device: always reports core events
[    32.923] (**) evdev: A4TECH USB Device: Device: "/dev/input/event9"
[    32.923] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
[    32.923] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[    32.923] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[    32.923] (--) evdev: A4TECH USB Device: Found relative axes
[    32.923] (--) evdev: A4TECH USB Device: Found x and y relative axes
[    32.923] (II) evdev: A4TECH USB Device: Configuring as mouse
[    32.923] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[    32.923] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[    32.923] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.923] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb5/5-1/5-1:1.1/input/input9/event9"
[    32.924] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 11)
[    32.924] (II) evdev: A4TECH USB Device: initialized for relative axes.
[    32.924] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[    32.924] (**) A4TECH USB Device: (accel) acceleration profile 0
[    32.924] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[    32.924] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[    32.924] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[    32.924] (II) No input driver specified, ignoring this device.
[    32.924] (II) This device may have been added with another device file.
[    32.925] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event6)
[    32.925] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[    32.925] (II) Using input driver 'evdev' for 'Asus Laptop extra buttons'
[    32.925] (**) Asus Laptop extra buttons: always reports core events
[    32.925] (**) evdev: Asus Laptop extra buttons: Device: "/dev/input/event6"
[    32.925] (--) evdev: Asus Laptop extra buttons: Vendor 0 Product 0
[    32.925] (--) evdev: Asus Laptop extra buttons: Found keys
[    32.925] (II) evdev: Asus Laptop extra buttons: Configuring as keyboard
[    32.925] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input6/event6"
[    32.925] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 12)
[    32.925] (**) Option "xkb_rules" "evdev"
[    32.925] (**) Option "xkb_model" "evdev"
[    32.925] (**) Option "xkb_layout" "us"
[    32.925] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    32.925] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    32.926] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    32.926] (**) AT Translated Set 2 keyboard: always reports core events
[    32.926] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    32.926] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    32.926] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    32.926] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    32.926] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    32.926] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[    32.926] (**) Option "xkb_rules" "evdev"
[    32.926] (**) Option "xkb_model" "evdev"
[    32.926] (**) Option "xkb_layout" "us"
[    32.926] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[    32.926] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    32.926] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[    32.926] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    32.926] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event11"
[    32.927] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    32.927] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[    32.927] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[    32.927] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[    32.927] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[    32.927] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[    32.927] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[    32.927] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    32.927] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input11/event11"
[    32.927] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[    32.927] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[    32.927] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    32.927] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[    32.927] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    32.927] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    32.927] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    32.927] (II) No input driver specified, ignoring this device.
[    32.927] (II) This device may have been added with another device file.
[    32.928] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    32.928] (II) No input driver specified, ignoring this device.
[    32.928] (II) This device may have been added with another device file.
[    33.727] (II) RADEON(0): EDID vendor "AUO", prod id 4353
[    33.727] (II) RADEON(0): Printing DDC gathered Modelines:
[    33.727] (II) RADEON(0): Modeline "1440x900"x0.0   96.30  1440 1504 1536 1760  900 903 906 912 -hsync -vsync (54.7 kHz eP)
[  6722.691] (II) evdev: SynPS/2 Synaptics TouchPad: Close
[  6722.691] (II) UnloadModule: "evdev"
[  6722.691] (II) evdev: AT Translated Set 2 keyboard: Close
[  6722.691] (II) UnloadModule: "evdev"
[  6722.691] (II) evdev: Asus Laptop extra buttons: Close
[  6722.691] (II) UnloadModule: "evdev"
[  6722.691] (II) evdev: A4TECH USB Device: Close
[  6722.691] (II) UnloadModule: "evdev"
[  6722.691] (II) evdev: A4TECH USB Device: Close
[  6722.691] (II) UnloadModule: "evdev"
[  6722.691] (II) evdev: Sleep Button: Close
[  6722.691] (II) UnloadModule: "evdev"
[  6722.691] (II) evdev: Power Button: Close
[  6722.691] (II) UnloadModule: "evdev"
[  6722.692] (II) evdev: Video Bus: Close
[  6722.692] (II) UnloadModule: "evdev"
[  6722.692] (II) evdev: Power Button: Close
[  6722.692] (II) UnloadModule: "evdev"
[  6722.712] Server terminated successfully (0). Closing log file.

Попытался перефоткать логи, там матюги быстро-быстро идут - сложно поймать, вот что вышло:


Там каждый экран заканчивается фразой end trace

Да, сислог у меня включен, я эта..., слишком тупой для системд. Журнал отключил...

В емерженси кансоль, как ни странно,через на третий попадаешь, но что там делать - пока не придумал )))

Так... после раза эдак 12-го система нормально загрузилась. Не знаю - что произошло.
yaa
9 лет, 3 месяца назад
Темы: 23
Сообщения: 170
Участник с: 30 декабря 2011
Так, кажется понятно в чем проблема - решил на всякий случай пересобрать ядро:

==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 3.9.2-1-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [filesystems]
==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
  -> Running build hook: [keyboard]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 3.9.2-1-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: bfa
  -> Running build hook: [filesystems]
==> WARNING: Hook 'usbinput' is deprecated. Replace it with 'keyboard' in your config
  -> Running build hook: [keyboard]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: bfa

С этим живут?
 
Зарегистрироваться или войдите чтобы оставить сообщение.

© 2006-2022, Русскоязычное сообщество Arch Linux.
Название и логотип Arch Linux ™ являются признанными торговыми марками.
Linux ® — зарегистрированная торговая марка Linus Torvalds и LMI.