spawnox Сообщения

spawnox	# 10 лет, 7 месяцев назад
Темы: 3 Сообщения: 8 Участник с: 05 июля 2011	http://itmages.ru/image/view/271101/1788d211 Вот на одном из сайтов увидел аккуратный трей. Захотелось себе такой же. Но автор сообщения не отвечает ( Может кто сможет мне помочь определить, и как такого добиться???

spawnox	# 10 лет, 8 месяцев назад
Темы: 3 Сообщения: 8 Участник с: 05 июля 2011	Да я понимаю что она всегда наверху. Но дело не в том что она сверху, она не дает mplayer раскрыться полностью. Как до компа доберусь скину конфиг тинта.

spawnox	# 10 лет, 8 месяцев назад
Темы: 3 Сообщения: 8 Участник с: 05 июля 2011	Другим плеером пока не пробовал. Не догадался )))

spawnox	# 10 лет, 8 месяцев назад
Темы: 3 Сообщения: 8 Участник с: 05 июля 2011	Всех приветствую!!! Вот такая незначительная проблемка но раздражает до жути ))) SMplayer когда делаю на полный экран он занимает не весь экран, внизу где у меня тинт остается полоска тинта как можно это убрать??? Вот скрин http://linkme.ufanet.ru/images/237db478 … 0e872d.png

spawnox

# 10 лет, 8 месяцев назад

Темы: 3

Сообщения: 8

Участник с: 05 июля 2011

Всех приветствую!!!

Вот такая незначительная проблемка но раздражает до жути ))) SMplayer когда делаю на полный экран он занимает не весь экран, внизу где у меня тинт остается полоска тинта как можно это убрать???

Вот скрин http://linkme.ufanet.ru/images/237db478 … 0e872d.png

spawnox	# 11 лет, 2 месяца назад
Темы: 3 Сообщения: 8 Участник с: 05 июля 2011	Shaman вот как-то так, почему-то иногда глючит трей у tint2 в планах подобрать шрифты, иконки. думаю есть ли смысл в коньках. все еще в поисках легких приложений для просмотра картинок, видео и тд и тп зы это мой первый compiz standalone :) ззы да и вопрос, почему может не работать хоткей на XF86Tools (на ноуте Fn+F9)? тут же Fn+F10 работает и отрубает звук как полагается. А можно мне обоину?? И что такое справа??? И конфиг тинта, если не жалко :[

spawnox

# 11 лет, 2 месяца назад

Темы: 3

Сообщения: 8

Участник с: 05 июля 2011

Shaman

вот как-то так, почему-то иногда глючит трей у tint2
в планах подобрать шрифты, иконки.
думаю есть ли смысл в коньках.
все еще в поисках легких приложений для просмотра картинок, видео и тд и тп
зы это мой первый compiz standalone :)
ззы да и вопрос, почему может не работать хоткей на XF86Tools (на ноуте Fn+F9)? тут же Fn+F10 работает и отрубает звук как полагается.

А можно мне обоину?? И что такое справа??? И конфиг тинта, если не жалко :[

spawnox	# 11 лет, 2 месяца назад
Темы: 3 Сообщения: 8 Участник с: 05 июля 2011	Все получилось. Спасибо всем за помощь. Флешка действительно была загрузочной с нее устанавливал ArchLinux )))) Попробовал другую все чики-пуки )))) Еще раз всем спасибо за помощь тему можно закрывать.

spawnox	# 11 лет, 2 месяца назад
Темы: 3 Сообщения: 8 Участник с: 05 июля 2011	Вывод dmesg. [ 5.014820] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 5.015452] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) [ 5.015935] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 5.019167] tifm_7xx1 0000:0a:09.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 5.033322] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 5.033417] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable [ 5.033581] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 5.034268] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 5.056540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.056590] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.056612] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 5.056617] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.056659] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 5.063373] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 5.063387] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.067279] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 5.067302] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0644000 [ 5.080038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 5.080366] hub 1-0:1.0: USB hub found [ 5.080378] hub 1-0:1.0: 8 ports detected [ 5.175703] leds_ss4200: no LED devices found [ 5.207102] intel_rng: FWH not detected [ 5.260762] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.265272] uhci_hcd: USB Universal Host Controller Interface driver [ 5.265351] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 5.265363] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 5.265368] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.265385] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.274359] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 5.274677] hub 2-0:1.0: USB hub found [ 5.274684] hub 2-0:1.0: 2 ports detected [ 5.274781] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 5.274795] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 5.274800] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.274810] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 5.283699] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 5.287103] hub 3-0:1.0: USB hub found [ 5.287113] hub 3-0:1.0: 2 ports detected [ 5.287216] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 5.287229] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 5.287235] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.287245] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 5.298880] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 5.299210] hub 4-0:1.0: USB hub found [ 5.299217] hub 4-0:1.0: 2 ports detected [ 5.299315] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 5.299328] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 5.299332] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 5.299343] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 5.302311] yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0110] [ 5.302335] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI [ 5.302338] yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI [ 5.302345] yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x66 [ 5.307001] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 [ 5.307344] hub 5-0:1.0: USB hub found [ 5.307351] hub 5-0:1.0: 2 ports detected [ 5.342144] cfg80211: Calling CRDA to update world regulatory domain [ 5.377393] acer_wmi: Acer Laptop ACPI-WMI Extras [ 5.398481] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.398568] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.441488] usb 1-7: new high speed USB device number 3 using ehci_hcd [ 5.526396] [drm] Initialized drm 1.1.0 20060810 [ 5.528841] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0 [ 5.544325] yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20 [ 5.544331] yenta_cardbus 0000:0a:09.0: Socket status: 30000006 [ 5.544336] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e [ 5.544348] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff] [ 5.544352] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff [ 5.569646] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff] [ 5.569652] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff [ 5.569665] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref] [ 5.569669] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff [ 5.585963] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 [ 5.738667] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 5.738731] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 5.738767] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 5.916886] ath5k 0000:03:00.0: enabling device (0000 -> 0002) [ 5.916902] ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 5.916918] ath5k 0000:03:00.0: setting latency timer to 64 [ 5.916994] ath5k 0000:03:00.0: registered as 'phy0' [ 5.933382] usb 3-1: new low speed USB device number 2 using uhci_hcd [ 5.944585] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 [ 5.946631] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 5.947526] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 5.948247] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 5.949035] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xdffff 0xe4000-0xfffff [ 5.949110] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 5.949183] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 5.949257] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: [ 5.956969] hda_codec: ALC883: SKU not ready 0x411111f0 [ 5.957064] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 5.973728] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.974347] clean. [ 5.988072] Linux media interface: v0.10 [ 6.024077] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.024085] i915 0000:00:02.0: setting latency timer to 64 [ 6.025328] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 6.025331] [drm] Driver supports precise vblank timestamp query. [ 6.045820] Linux video capture interface: v2.00 [ 6.100394] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0100) [ 6.160189] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 6.160622] [drm] initialized overlay support [ 6.169497] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/input/input10 [ 6.169697] usbcore: registered new interface driver uvcvideo [ 6.169700] USB Video Class driver (v1.0.0) [ 6.181217] usbcore: registered new interface driver usbhid [ 6.181221] usbhid: USB HID core driver [ 6.368483] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11 [ 6.368635] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.1-1/input0 [ 6.586238] ath: EEPROM regdomain: 0x65 [ 6.586242] ath: EEPROM indicates we should expect a direct regpair map [ 6.586247] ath: Country alpha2 being used: 00 [ 6.586249] ath: Regpair used: 0x65 [ 6.656815] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 6.657212] Registered led device: ath5k-phy0::rx [ 6.657236] Registered led device: ath5k-phy0::tx [ 6.657246] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 6.780053] fbcon: inteldrmfb (fb0) is primary device [ 6.826487] Console: switching to colour frame buffer device 160x50 [ 6.832528] fb0: inteldrmfb frame buffer device [ 6.832531] drm: registered panic notifier [ 6.832715] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 7.598451] EXT4-fs (sda1): re-mounted. Opts: (null) [ 7.753202] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 7.796915] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 7.881810] Adding 996024k swap on /dev/sda3. Priority:-1 extents:1 across:996024k [ 8.994916] sky2 0000:02:00.0: eth0: enabling interface [ 10.641586] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 75.747193] NET: Registered protocol family 10 [ 86.203357] eth0: no IPv6 routers present [ 111.316749] usb 1-2: new high speed USB device number 4 using ehci_hcd [ 111.501564] usbcore: registered new interface driver uas [ 111.523193] Initializing USB Mass Storage driver... [ 111.523548] scsi2 : usb-storage 1-2:1.0 [ 111.523986] usbcore: registered new interface driver usb-storage [ 111.523990] USB Mass Storage support registered. [ 112.524720] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 112.524981] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 112.766443] sd 2:0:0:0: [sdb] 7823360 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 112.767258] sd 2:0:0:0: [sdb] Write Protect is off [ 112.767264] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 112.767267] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 112.769803] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 112.770634] sdb: sdb1 [ 112.772805] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 112.772811] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 116.419859] fuse init (API version 7.16) [ 117.068559] UDF-fs: No anchor found [ 117.068565] UDF-fs: Rescanning with blocksize 2048 [ 117.075823] UDF-fs: Partition marked readonly; forcing readonly mount [ 117.076311] UDF-fs INFO UDF: Mounting volume 'ARCH_201005', timestamp 2010/05/16 19:58 (1168) А по поводу двух утилит. Я делал все по вики при установки pcmanfm.

spawnox

# 11 лет, 2 месяца назад

Темы: 3

Сообщения: 8

Участник с: 05 июля 2011

Вывод dmesg.

[    5.014820] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[    5.015452] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[    5.015935] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.019167] tifm_7xx1 0000:0a:09.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    5.033322] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    5.033417] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    5.033581] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    5.034268] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[    5.056540] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.056590] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.056612] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.056617] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.056659] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.063373] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    5.063387] ehci_hcd 0000:00:1d.7: debug port 1
[    5.067279] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    5.067302] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0644000
[    5.080038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.080366] hub 1-0:1.0: USB hub found
[    5.080378] hub 1-0:1.0: 8 ports detected
[    5.175703] leds_ss4200: no LED devices found
[    5.207102] intel_rng: FWH not detected
[    5.260762] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.265272] uhci_hcd: USB Universal Host Controller Interface driver
[    5.265351] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.265363] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.265368] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.265385] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.274359] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    5.274677] hub 2-0:1.0: USB hub found
[    5.274684] hub 2-0:1.0: 2 ports detected
[    5.274781] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    5.274795] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.274800] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.274810] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    5.283699] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[    5.287103] hub 3-0:1.0: USB hub found
[    5.287113] hub 3-0:1.0: 2 ports detected
[    5.287216] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.287229] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.287235] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.287245] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    5.298880] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    5.299210] hub 4-0:1.0: USB hub found
[    5.299217] hub 4-0:1.0: 2 ports detected
[    5.299315] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    5.299328] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    5.299332] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    5.299343] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    5.302311] yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0110]
[    5.302335] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI
[    5.302338] yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI
[    5.302345] yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x66
[    5.307001] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    5.307344] hub 5-0:1.0: USB hub found
[    5.307351] hub 5-0:1.0: 2 ports detected
[    5.342144] cfg80211: Calling CRDA to update world regulatory domain
[    5.377393] acer_wmi: Acer Laptop ACPI-WMI Extras
[    5.398481] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.398568] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.441488] usb 1-7: new high speed USB device number 3 using ehci_hcd
[    5.526396] [drm] Initialized drm 1.1.0 20060810
[    5.528841] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0
[    5.544325] yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
[    5.544331] yenta_cardbus 0000:0a:09.0: Socket status: 30000006
[    5.544336] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[    5.544348] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[    5.544352] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff
[    5.569646] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0xd0200000-0xd02fffff]
[    5.569652] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff
[    5.569665] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
[    5.569669] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff: excluding 0x20000000-0x23ffffff
[    5.585963] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[    5.738667] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    5.738731] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    5.738767] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    5.916886] ath5k 0000:03:00.0: enabling device (0000 -> 0002)
[    5.916902] ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.916918] ath5k 0000:03:00.0: setting latency timer to 64
[    5.916994] ath5k 0000:03:00.0: registered as 'phy0'
[    5.933382] usb 3-1: new low speed USB device number 2 using uhci_hcd
[    5.944585] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[    5.946631] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[    5.947526] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[    5.948247] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[    5.949035] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xdffff 0xe4000-0xfffff
[    5.949110] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[    5.949183] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[    5.949257] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[    5.956969] hda_codec: ALC883: SKU not ready 0x411111f0
[    5.957064] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[    5.973728] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    5.974347]  clean.
[    5.988072] Linux media interface: v0.10
[    6.024077] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.024085] i915 0000:00:02.0: setting latency timer to 64
[    6.025328] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.025331] [drm] Driver supports precise vblank timestamp query.
[    6.045820] Linux video capture interface: v2.00
[    6.100394] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0100)
[    6.160189] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.160622] [drm] initialized overlay support
[    6.169497] input: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/input/input10
[    6.169697] usbcore: registered new interface driver uvcvideo
[    6.169700] USB Video Class driver (v1.0.0)
[    6.181217] usbcore: registered new interface driver usbhid
[    6.181221] usbhid: USB HID core driver
[    6.368483] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input11
[    6.368635] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.1-1/input0
[    6.586238] ath: EEPROM regdomain: 0x65
[    6.586242] ath: EEPROM indicates we should expect a direct regpair map
[    6.586247] ath: Country alpha2 being used: 00
[    6.586249] ath: Regpair used: 0x65
[    6.656815] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.657212] Registered led device: ath5k-phy0::rx
[    6.657236] Registered led device: ath5k-phy0::tx
[    6.657246] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[    6.780053] fbcon: inteldrmfb (fb0) is primary device
[    6.826487] Console: switching to colour frame buffer device 160x50
[    6.832528] fb0: inteldrmfb frame buffer device
[    6.832531] drm: registered panic notifier
[    6.832715] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    7.598451] EXT4-fs (sda1): re-mounted. Opts: (null)
[    7.753202] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    7.796915] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[    7.881810] Adding 996024k swap on /dev/sda3.  Priority:-1 extents:1 across:996024k 
[    8.994916] sky2 0000:02:00.0: eth0: enabling interface
[   10.641586] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[   75.747193] NET: Registered protocol family 10
[   86.203357] eth0: no IPv6 routers present
[  111.316749] usb 1-2: new high speed USB device number 4 using ehci_hcd
[  111.501564] usbcore: registered new interface driver uas
[  111.523193] Initializing USB Mass Storage driver...
[  111.523548] scsi2 : usb-storage 1-2:1.0
[  111.523986] usbcore: registered new interface driver usb-storage
[  111.523990] USB Mass Storage support registered.
[  112.524720] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[  112.524981] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  112.766443] sd 2:0:0:0: [sdb] 7823360 512-byte logical blocks: (4.00 GB/3.73 GiB)
[  112.767258] sd 2:0:0:0: [sdb] Write Protect is off
[  112.767264] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[  112.767267] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  112.769803] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  112.770634]  sdb: sdb1
[  112.772805] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[  112.772811] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[  116.419859] fuse init (API version 7.16)
[  117.068559] UDF-fs: No anchor found
[  117.068565] UDF-fs: Rescanning with blocksize 2048
[  117.075823] UDF-fs: Partition marked readonly; forcing readonly mount
[  117.076311] UDF-fs INFO UDF: Mounting volume 'ARCH_201005', timestamp 2010/05/16 19:58 (1168)

А по поводу двух утилит. Я делал все по вики при установки pcmanfm.

spawnox	# 11 лет, 2 месяца назад
Темы: 3 Сообщения: 8 Участник с: 05 июля 2011	Всех приветствую. Установил недавно ArchLinux. Люблю изучать что-то новое, установил openbox, pcmanfm. вроде все настроил, но когда вставляю флешку слева она появляется два раза и во второй раз выдается ошибка Error mounting: mount: /dev/sdb1 already mounted or /media/ARCH_201005_ busy Помогите чем можете… Или хотя бы в какую сторону копать. Заранее спасибо всем откликнувшимся )

spawnox

# 11 лет, 2 месяца назад

Темы: 3

Сообщения: 8

Участник с: 05 июля 2011

Всех приветствую. Установил недавно ArchLinux. Люблю изучать что-то новое, установил openbox, pcmanfm. вроде все настроил, но когда вставляю флешку слева она появляется два раза и во второй раз выдается ошибка

Error mounting: mount: /dev/sdb1 already mounted or /media/ARCH_201005_ busy

Помогите чем можете… Или хотя бы в какую сторону копать.
Заранее спасибо всем откликнувшимся )