DeaTh
6 лет, 10 месяцев назад
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015
Xts
DeaTh
какой же я нубас в этих арчлинуксах, привык к нетворкменеджеру
поставь нм, кто не дает то?
По факту, нет нужды. Из-за недостатка опыта эта задача показалась нетривиальной и поэтому так долго решал:)
DeaTh
6 лет, 10 месяцев назад
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015
nafanja
DeaTh
Похоже, проблема в systemd
:D)))

а ручками поднимается?
Боже, какой же я нубас в этих арчлинуксах, привык к нетворкменеджеру. При обновлении вайфай карточка просто заблокировалась. rfkill unblock wifi помог. -.-
DeaTh
6 лет, 10 месяцев назад
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015
Попробовал через linux-lts - та же история. Похоже, проблема в systemd, но из логов ничего понять не могу. Как таковой ошибки нет:(
DeaTh
6 лет, 10 месяцев назад (отредактировано 6 лет, 10 месяцев назад)
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015
Добрый день, недавно прилетело большое обновление приложений, в котором обновился systemd (226-3 -> 227-1) и ядро linux (4.2.2-1 -> 4.2.3-1). После перезагрузки компьютера перестал работать вайфай. Wifi работал через сгенерированный профиль wifi-menu и netctl. Также решил проверить через шнурок интернет, не работает и вылетает с той же ошибкой.
[[email protected] ~]$ sudo netctl start wlp16s0-Home-WiFi
Job for [email protected]\x2dHome\x2dWiFi.service failed because the control process exited with error code. See "systemctl status "[email protected]\\x2dHome\\x2dWiFi.service"" and "journalctl -xe" for details.

[[email protected] ~]$ sudo netctl start ethernet-dhcp
Job for [email protected]\x2ddhcp.service failed because the control process exited with error code. See "systemctl status "[email protected]\\x2ddhcp.service"" and "journalctl -xe" for details.

Лог пакмэна

[2015-10-18 15:29] [ALPM] upgraded glib2 (2.44.1-1 -> 2.46.0-2)
[2015-10-18 15:29] [ALPM] upgraded xz (5.2.1-1 -> 5.2.2-1)
[2015-10-18 15:29] [ALPM] upgraded gdk-pixbuf2 (2.31.7-1 -> 2.32.1-1)
[2015-10-18 15:29] [ALPM] upgraded gtk-update-icon-cache (3.16.7-1 -> 3.18.2-1)
[2015-10-18 15:29] [ALPM] upgraded harfbuzz (1.0.4-1 -> 1.0.6-1)
[2015-10-18 15:29] [ALPM] upgraded libsystemd (226-3 -> 227-1)
[2015-10-18 15:29] [ALPM] upgraded libutil-linux (2.27-5 -> 2.27-6)
[2015-10-18 15:29] [ALPM] upgraded util-linux (2.27-5 -> 2.27-6)
[2015-10-18 15:29] [ALPM] upgraded systemd (226-3 -> 227-1)
[2015-10-18 15:29] [ALPM] upgraded mesa (11.0.2-1 -> 11.0.3-1)
[2015-10-18 15:29] [ALPM] upgraded mesa-libgl (11.0.2-1 -> 11.0.3-1)
[2015-10-18 15:30] [ALPM] upgraded pango (1.36.8-1 -> 1.38.1-1)
[2015-10-18 15:30] [ALPM] upgraded librsvg (1:2.40.9-2 -> 1:2.40.11-1)
[2015-10-18 15:30] [ALPM] upgraded adwaita-icon-theme (3.16.2.1-1 -> 3.18.0-1)
[2015-10-18 15:30] [ALPM] upgraded at-spi2-core (2.16.0-1 -> 2.18.1-1)
[2015-10-18 15:30] [ALPM] upgraded atk (2.16.0-1 -> 2.18.0-1)
[2015-10-18 15:30] [ALPM] upgraded at-spi2-atk (2.16.0-1 -> 2.18.1-1)
[2015-10-18 15:30] [ALPM] upgraded curl (7.44.0-1 -> 7.45.0-1)
[2015-10-18 15:30] [ALPM] upgraded doublecmd-gtk2 (0.6.5-1 -> 0.6.6-1)
[2015-10-18 15:30] [ALPM-SCRIPTLET] /usr/bin/update-desktop-database
[2015-10-18 15:30] [ALPM-SCRIPTLET] /usr/bin/update-mime-database
[2015-10-18 15:30] [ALPM-SCRIPTLET] /usr/bin/gtk-update-icon-cache
[2015-10-18 15:30] [ALPM] upgraded x265 (1.7-2 -> 1.8-1)
[2015-10-18 15:30] [ALPM] upgraded ffmpeg (1:2.8-1 -> 1:2.8.1-2)
[2015-10-18 15:30] [ALPM] upgraded firefox (41.0.1-1 -> 41.0.2-1)
[2015-10-18 15:30] [ALPM] upgraded gsettings-desktop-schemas (3.16.1-1 -> 3.18.0-1)
[2015-10-18 15:30] [ALPM] upgraded glib-networking (2.44.0-3 -> 2.46.1-1)
[2015-10-18 15:30] [ALPM] upgraded gpgme (1.6.0-1 -> 1.6.0-2)
[2015-10-18 15:30] [ALPM] upgraded groff (1.22.3-3 -> 1.22.3-4)
[2015-10-18 15:30] [ALPM] upgraded gstreamer (1.4.5-1 -> 1.6.0-1)
[2015-10-18 15:30] [ALPM] upgraded gst-plugins-base-libs (1.4.5-1 -> 1.6.0-1)
[2015-10-18 15:30] [ALPM] upgraded gst-libav (1.4.5-1 -> 1.6.0-1)
[2015-10-18 15:30] [ALPM] upgraded libsoup (2.50.0-1 -> 2.52.1-1)
[2015-10-18 15:30] [ALPM] upgraded gst-plugins-good (1.4.5-3 -> 1.6.0-1)
[2015-10-18 15:30] [ALPM] upgraded xkeyboard-config (2.15-1 -> 2.16-1)
[2015-10-18 15:30] [ALPM] upgraded gtk3 (3.16.7-1 -> 3.18.2-1)
[2015-10-18 15:30] [ALPM] upgraded vte-common (0.40.2-1 -> 0.42.1-1)
[2015-10-18 15:30] [ALPM] upgraded vte (0.28.2-6 -> 0.28.2-7)
[2015-10-18 15:30] [ALPM] upgraded guake (0.8.0-1 -> 0.8.1-1)
[2015-10-18 15:30] [ALPM] installed gcr (3.18.0-1)
[2015-10-18 15:30] [ALPM] upgraded gvfs (1.24.2-1 -> 1.26.1.1-1)
[2015-10-18 15:30] [ALPM] upgraded harfbuzz-icu (1.0.4-1 -> 1.0.6-1)
[2015-10-18 15:30] [ALPM] upgraded libgtop (2.30.0-1 -> 2.32.0-1)
[2015-10-18 15:30] [ALPM] upgraded xdg-utils (1.1.0.git20150323-1 -> 1.1.1-1)
[2015-10-18 15:31] [ALPM] upgraded libreoffice-fresh (5.0.2-2 -> 5.0.2-3)
[2015-10-18 15:31] [ALPM-SCRIPTLET] > LibreOffice now uses highly experimental gtk3 vcl by default
[2015-10-18 15:31] [ALPM-SCRIPTLET] > on some desktops. To use stable gtk2 vcl uncomment
[2015-10-18 15:31] [ALPM-SCRIPTLET] > it in /etc/profile.d/libreoffice-fresh.{sh,csh}
[2015-10-18 15:31] [ALPM] upgraded linux (4.2.2-1 -> 4.2.3-1)
[2015-10-18 15:31] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2015-10-18 15:31] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Starting build: 4.2.3-1-ARCH
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [autodetect]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Image generation successful
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Starting build: 4.2.3-1-ARCH
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [base]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [udev]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [modconf]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [block]
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: wd719x
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [filesystems]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [keyboard]
[2015-10-18 15:31] [ALPM-SCRIPTLET]   -> Running build hook: [fsck]
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
[2015-10-18 15:31] [ALPM-SCRIPTLET] ==> Image generation successful
[2015-10-18 15:31] [ALPM] upgraded man-db (2.7.3-1 -> 2.7.4-1)
[2015-10-18 15:31] [ALPM] installed libuv (1.7.5-1)
[2015-10-18 15:31] [ALPM] installed http-parser (2.5.0-1)
[2015-10-18 15:31] [ALPM] upgraded nodejs (4.1.2-1 -> 4.2.1-1)
[2015-10-18 15:31] [ALPM] upgraded npm (3.3.5-1 -> 3.3.8-2)
[2015-10-18 15:31] [ALPM] upgraded openresolv (3.7.0-1 -> 3.7.1-1)
[2015-10-18 15:31] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2015-10-18 15:31] [ALPM] upgraded pacman-mirrorlist (20151002-1 -> 20151017-1)
[2015-10-18 15:31] [ALPM] upgraded plank (0.10.0-1 -> 0.10.1-1)
[2015-10-18 15:31] [ALPM] upgraded systemd-sysvcompat (226-3 -> 227-1)
[2015-10-18 15:31] [ALPM] upgraded vlc (2.2.1-7 -> 2.2.1-8)
[2015-10-18 15:32] [ALPM] upgraded wine (1.7.52-1 -> 1.7.53-1)
[2015-10-18 15:32] [ALPM] upgraded xf86-video-intel (1:2.99.917+472+gf0fd4d5-1 -> 1:2.99.917+478+gdf72bc5-2)
[2015-10-18 15:32] [ALPM] installed aspell (0.60.6.1-3)
[2015-10-18 15:32] [ALPM-SCRIPTLET] ==> aspell comes with no default dictionary
[2015-10-18 15:32] [ALPM] installed hspell (1.2-2)
[2015-10-18 15:32] [ALPM] installed enchant (1.6.0-5)
[2015-10-18 15:32] [ALPM] installed libnm-glib (1.0.6-2)
[2015-10-18 15:32] [ALPM] installed libmm-glib (1.4.12-1)
[2015-10-18 15:32] [ALPM] installed geoclue2 (2.3.0-1)
[2015-10-18 15:32] [ALPM] installed webkit2gtk (2.10.0-1)
[2015-10-18 15:32] [ALPM] upgraded zenity (3.16.3-1 -> 3.18.1-1)
[2015-10-18 15:32] [ALPM] transaction completed
[2015-10-18 15:35] [PACMAN] Running 'pacman --color auto -Sy'
[2015-10-18 15:35] [PACMAN] synchronizing package lists


[[email protected] ~]$ ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp2s8: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:1e:ec:75:14:08 brd ff:ff:ff:ff:ff:ff
3: wlp16s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:1f:3c:71:50:9b brd ff:ff:ff:ff:ff:ff

systemctl status netctl
[[email protected] ~]$ sudo systemctl status [email protected]\\x2dHome\\x2dWiFi.service
● [email protected]\x2dHome\x2dWiFi.service - Automatically generated profile by wifi-menu
   Loaded: loaded (/etc/systemd/system/[email protected]\x2dHome\x2dWiFi.service; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Sun 2015-10-18 19:45:51 NOVT; 10min ago
     Docs: man:netctl.profile(5)
 Main PID: 856 (code=exited, status=1/FAILURE)

Oct 18 19:45:46 Jarvis systemd[1]: Starting Automatically generated profile by wifi-menu...
Oct 18 19:45:46 Jarvis network[856]: Starting network profile 'wlp16s0-Home-WiFi'...
Oct 18 19:45:51 Jarvis network[856]: Failed to bring the network up for profile 'wlp16s0-Home-WiFi'
Oct 18 19:45:51 Jarvis systemd[1]: [email protected]\x2dHome\x2dWiFi.service: Main process exited, code=exited, status=1/FAILURE
Oct 18 19:45:51 Jarvis systemd[1]: Failed to start Automatically generated profile by wifi-menu.
Oct 18 19:45:51 Jarvis systemd[1]: [email protected]\x2dHome\x2dWiFi.service: Unit entered failed state.
Oct 18 19:45:51 Jarvis systemd[1]: [email protected]\x2dHome\x2dWiFi.service: Failed with result 'exit-code'.

journalctl -xe
Oct 18 20:01:03 Jarvis sudo[1132]:    death : TTY=pts/0 ; PWD=/home/death ; USER=root ; COMMAND=/usr/bin/netctl start wlp16s0-Home-WiFi
Oct 18 20:01:03 Jarvis sudo[1132]: pam_unix(sudo:session): session opened for user root by death(uid=0)
Oct 18 20:01:03 Jarvis systemd[1]: Starting Automatically generated profile by wifi-menu...
-- Subject: Unit [email protected]\x2dHome\x2dWiFi.service has begun start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit [email protected]\x2dHome\x2dWiFi.service has begun starting up.
Oct 18 20:01:03 Jarvis polkitd[429]: Registered Authentication Agent for unix-process:1137:183319 (system bus name :1.59 [/usr/bin/pkttyagen
Oct 18 20:01:04 Jarvis network[1143]: Starting network profile 'wlp16s0-Home-WiFi'...
Oct 18 20:01:09 Jarvis network[1143]: Failed to bring the network up for profile 'wlp16s0-Home-WiFi'
Oct 18 20:01:09 Jarvis systemd[1]: [email protected]\x2dHome\x2dWiFi.service: Main process exited, code=exited, status=1/FAILURE
Oct 18 20:01:09 Jarvis systemd[1]: Failed to start Automatically generated profile by wifi-menu.
-- Subject: Unit [email protected]\x2dHome\x2dWiFi.service has failed
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit [email protected]\x2dHome\x2dWiFi.service has failed.
--
-- The result is failed.
Oct 18 20:01:09 Jarvis systemd[1]: [email protected]\x2dHome\x2dWiFi.service: Unit entered failed state.
Oct 18 20:01:09 Jarvis systemd[1]: [email protected]\x2dHome\x2dWiFi.service: Failed with result 'exit-code'.
Oct 18 20:01:09 Jarvis sudo[1132]: pam_unix(sudo:session): session closed for user root
Oct 18 20:01:09 Jarvis polkitd[429]: Unregistered Authentication Agent for unix-process:1137:183319 (system bus name :1.59, object path /org

lspci -k
[[email protected] ~]$ lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03)
	Subsystem: Hewlett-Packard Company Device 30d5
	Kernel driver in use: agpgart-intel
	Kernel modules: intel_agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03)
	Subsystem: Hewlett-Packard Company Device 30d5
	Kernel driver in use: i915
	Kernel modules: i915
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
	Subsystem: Hewlett-Packard Company Device 30d5
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
	Subsystem: Hewlett-Packard Company Device 30d5
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
	Kernel driver in use: pcieport
	Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
	Subsystem: Hewlett-Packard Company Device 30d5
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
	Subsystem: Hewlett-Packard Company Device 30d5
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
	Subsystem: Hewlett-Packard Company Device 30d5
	Kernel driver in use: lpc_ich
	Kernel modules: intel_rng, lpc_ich, leds_ss4200
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01)
	Subsystem: Hewlett-Packard Company Device 30d5
	Kernel driver in use: ata_piix
	Kernel modules: ata_piix, pata_acpi, ata_generic
02:06.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
	Subsystem: Hewlett-Packard Company Device 30d5
	Kernel driver in use: yenta_cardbus
	Kernel modules: yenta_socket
02:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 01)
	Subsystem: Hewlett-Packard Company Device 30d5
	Kernel driver in use: e100
	Kernel modules: e100
10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
	Subsystem: Hewlett-Packard Company PRO/Wireless 3945ABG [Golan] Network Connection
	Kernel driver in use: iwl3945
	Kernel modules: iwl3945

Погуглил данную проблему, но решения не нашел.
DeaTh
6 лет, 11 месяцев назад
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015 
==> Software upgrade (new version) :
archlinuxfr/yaourt 1.6-1     -> 1.7-1
DeaTh
6 лет, 11 месяцев назад
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015
Ну и в виду красноглазой любви к скриншотам написал еще один хэлпер для выкладывания скриншотов
#!/bin/bash
scrot -d $1 -e 'itmagic $f'
DeaTh
6 лет, 11 месяцев назад
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015
Хорошо, как с вики разберусь, возьмусь за перевод чего-нибудь:)
DeaTh
6 лет, 11 месяцев назад
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015
Доброго здравия, Haron_Prime :)
Я несколько топорно, но решил эту задачу. Я Exec вынес в отдельный баш скрипт и его вызываю.
#!/bin/bash
itmages-upload-mod $1 | xclip -selection cli

[Desktop Entry]
Type=Action
Name=Upload to ITmages
Icon=go-up
Profiles=upload;

[X-Action-Profile upload]
Exec=itmagic %f
MimeTypes=image/*;
PS Не вижу смысла в доп манипуляциях типа grep BB_code_preview. В файле конфигураций itmages-upload-mod поставил выдачу ББкода(3ий пункт) и в строках 200-201 убрал вывод имени файла.
PPS Ах да, так же миме тайп поменял на изображения, чтобы в лишних местах не появлялся пункт меню.
DeaTh
6 лет, 11 месяцев назад
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015
Недавно вступил в общество ArchLinux(ну эту десктоп-убунту) и очень сильно порадовался вики. Все очень подробно описано, но на английском. Хотелось бы помочь с переводом. Есть ли какой то список статей, которые стоит перевести в первую очередь? Или можно рэндомно приводить к должному виду статьи, которые попадутся?
Также, был бы не против, если кто-нибудь поделится ссылкой где можно почитать о вики разметке, первый раз буду писать в вики. Опыт перевода есть, особенно тех.литературы.
DeaTh
6 лет, 11 месяцев назад
DeaTh avatar
Темы: 1
Сообщения: 10
Участник с: 02 октября 2015
[archlinuxfr] исключительно для йогурта.
 

© 2006-2022, Русскоязычное сообщество Arch Linux.
Название и логотип Arch Linux ™ являются признанными торговыми марками.
Linux ® — зарегистрированная торговая марка Linus Torvalds и LMI.