cmndralexgreen |
|
Темы:
22
Сообщения:
136
Участник с: 05 сентября 2009
|
Менеджер входа Slim, сегодня включаю компьютер и после стандартного процесса загрузки ОС вместо окна для ввода пароля - черный экран а курсор в виде красивая из стандартной темы Хсов. Все комбинации выхода/выключения, выхода из Х результатов не дает. Пытался загрузиться в безопасном “режиме”. Не получилось)). Последнее что делал, это манипуляции с фоном, удалил feh, правил конфиг tint2. Ничего криминального не делал, выключил комп вроде без ошибок, ушел спать, сегодня он пока еще не включался нормально. Подскажите что следует делать. |
mango |
|
Темы:
43
Сообщения:
1521
Участник с: 18 декабря 2008
|
в /var/log/Xorg.0.log и в /var/log/slim.log ничего подозрительного нет? |
cmndralexgreen |
|
Темы:
22
Сообщения:
136
Участник с: 05 сентября 2009
|
)) я к сожалению пока не понял как мне миновать слим который приводит к черному экрану, а так как доберусь до консоли обязательно просмотрю и эти информационные файлы |
rdf |
|
Темы:
1
Сообщения:
165
Участник с: 01 мая 2011
|
А slim с какого места запускается? Если с демонов, inittab или rc.local, то можно в строке ядра (груб, строка kernel) дописать 1 и загрузиться в single. |
cmndralexgreen |
|
Темы:
22
Сообщения:
136
Участник с: 05 сентября 2009
|
Да слим грузится как демон из rc.conf. При загрузке не знаю как остановить процесс загрузки и соответственно ничего сделать не успеваю. В Xorg.0.log через загрузочную флешку зашол, но ничего подозрительного не увидел. |
cmndralexgreen |
|
Темы:
22
Сообщения:
136
Участник с: 05 сентября 2009
|
Вот содержимое slim.log/usr/bin/xauth: file /var/run/slim.auth does not exist slim: waiting for X server to begin accepting connections X.Org X Server 1.11.1 Release Date: 2011-09-24 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.0-ARCH x86_64 Current Operating System: Linux z11 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 11:35:34 CEST 2011 x86_64 Kernel command line: root=/dev/disk/by-uuid/85fd2110-8df6-476e-8c53-dadb7b62bfa7 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux Build Date: 10 October 2011 08:55:30AM Current version of pixman: 0.22.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 20:12:20 2011 (==) Using config directory: "/etc/X11/xorg.conf.d" (EE) Failed to load module "vesa" (module does not exist, 0) (EE) Failed to load module "fbdev" (module does not exist, 0) (II) [KMS] Kernel modesetting enabled. . /usr/bin/xauth: file /root/.Xauthority does not exist /bin/bash: /root/.xinitrc: No such file or directory slim: waiting for X server to shut down Backtrace: 0: /usr/bin/X (xorg_backtrace+0x26) [0x566aa6] 1: /usr/bin/X (0x400000+0x16a719) [0x56a719] 2: /lib/libpthread.so.0 (0x7f939eebe000+0xf800) [0x7f939eecd800] 3: /lib/libc.so.6 (memcpy+0xe1) [0x7f939dea1fc1] 4: /usr/bin/X (mieqEnqueue+0x8c) [0x5472ac] 5: /usr/bin/X (0x400000+0x46f34) [0x446f34] 6: /usr/bin/X (xf86PostKeyboardEvent+0x4b) [0x48214b] 7: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f939a0bb000+0x481e) [0x7f939a0bf81e] 8: /usr/bin/X (0x400000+0x6c9a7) [0x46c9a7] 9: /usr/bin/X (0x400000+0x9258e) [0x49258e] 10: /lib/libpthread.so.0 (0x7f939eebe000+0xf800) [0x7f939eecd800] 11: /usr/bin/X (0x400000+0x16abf0) [0x56abf0] 12: /lib/libpthread.so.0 (0x7f939eebe000+0xf800) [0x7f939eecd800] 13: /lib/libc.so.6 (sigprocmask+0x10) [0x7f939de519f0] 14: /usr/bin/X (0x400000+0x2948c) [0x42948c] 15: /usr/bin/X (0x400000+0x29a01) [0x429a01] 16: /usr/bin/X (0x400000+0x22f2c) [0x422f2c] 17: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f939de3e13d] 18: /usr/bin/X (0x400000+0x231ad) [0x4231ad] Segmentation fault at address (nil) Fatal server error: Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. Server terminated with error (1). Closing log file. /usr/bin/xauth: file /var/run/slim.auth does not exist slim: waiting for X server to begin accepting connections X.Org X Server 1.11.1 Release Date: 2011-09-24 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.0-ARCH x86_64 Current Operating System: Linux z11 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 11:35:34 CEST 2011 x86_64 Kernel command line: root=/dev/disk/by-uuid/85fd2110-8df6-476e-8c53-dadb7b62bfa7 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux Build Date: 10 October 2011 08:55:30AM Current version of pixman: 0.22.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 20:12:34 2011 (==) Using config directory: "/etc/X11/xorg.conf.d" (EE) Failed to load module "vesa" (module does not exist, 0) (EE) Failed to load module "fbdev" (module does not exist, 0) (II) [KMS] Kernel modesetting enabled. . /usr/bin/xauth: file /home/master/.Xauthority does not exist /bin/bash: /home/master/.xinitrc: No such file or directory slim: waiting for X server to shut downServer terminated successfully (0). Closing log file. /usr/bin/xauth: file /var/run/slim.auth does not exist slim: waiting for X server to begin accepting connections X.Org X Server 1.11.1 Release Date: 2011-09-24 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.0-ARCH x86_64 Current Operating System: Linux z11 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 11:35:34 CEST 2011 x86_64 Kernel command line: root=/dev/disk/by-uuid/85fd2110-8df6-476e-8c53-dadb7b62bfa7 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux Build Date: 10 October 2011 08:55:30AM Current version of pixman: 0.22.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 20:12:48 2011 (==) Using config directory: "/etc/X11/xorg.conf.d" (EE) Failed to load module "vesa" (module does not exist, 0) (EE) Failed to load module "fbdev" (module does not exist, 0) (II) [KMS] Kernel modesetting enabled. . /usr/bin/xauth: file /home/master/.Xauthority does not exist /bin/bash: /home/master/.xinitrc: No such file or directory slim: waiting for X server to shut downServer terminated successfully (0). Closing log file. /usr/bin/xauth: file /var/run/slim.auth does not exist slim: waiting for X server to begin accepting connections X.Org X Server 1.11.1 Release Date: 2011-09-24 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.0-ARCH x86_64 Current Operating System: Linux z11 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 11:35:34 CEST 2011 x86_64 Kernel command line: root=/dev/disk/by-uuid/85fd2110-8df6-476e-8c53-dadb7b62bfa7 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux Build Date: 10 October 2011 08:55:30AM Current version of pixman: 0.22.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 20:13:12 2011 (==) Using config directory: "/etc/X11/xorg.conf.d" (EE) Failed to load module "vesa" (module does not exist, 0) (EE) Failed to load module "fbdev" (module does not exist, 0) (II) [KMS] Kernel modesetting enabled. . sh: import: command not found sh: import: command not found slim: waiting for X server to shut downServer terminated successfully (0). Closing log file. /usr/bin/xauth: file /var/run/slim.auth does not exist slim: waiting for X server to begin accepting connections X.Org X Server 1.11.1 Release Date: 2011-09-24 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.0-ARCH x86_64 Current Operating System: Linux z11 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 11:35:34 CEST 2011 x86_64 Kernel command line: root=/dev/disk/by-uuid/85fd2110-8df6-476e-8c53-dadb7b62bfa7 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux Build Date: 10 October 2011 08:55:30AM Current version of pixman: 0.22.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 20:15:29 2011 (==) Using config directory: "/etc/X11/xorg.conf.d" (EE) Failed to load module "vesa" (module does not exist, 0) (EE) Failed to load module "fbdev" (module does not exist, 0) (II) [KMS] Kernel modesetting enabled. . slim: pam_authenticate(): Conversation error Backtrace: 0: /usr/bin/X (xorg_backtrace+0x26) [0x566aa6] 1: /usr/bin/X (0x400000+0x16a719) [0x56a719] 2: /lib/libpthread.so.0 (0x7ff567b22000+0xf800) [0x7ff567b31800] 3: /lib/libc.so.6 (memcpy+0xe1) [0x7ff566b05fc1] 4: /usr/bin/X (mieqEnqueue+0x8c) [0x5472ac] 5: /usr/bin/X (0x400000+0x46f34) [0x446f34] 6: /usr/bin/X (xf86PostKeyboardEvent+0x4b) [0x48214b] 7: /usr/lib/xorg/modules/input/evdev_drv.so (0x7ff562d1f000+0x481e) [0x7ff562d2381e] 8: /usr/bin/X (0x400000+0x6c9a7) [0x46c9a7] 9: /usr/bin/X (0x400000+0x9258e) [0x49258e] 10: /lib/libpthread.so.0 (0x7ff567b22000+0xf800) [0x7ff567b31800] 11: /usr/bin/X (0x400000+0x16abf0) [0x56abf0] 12: /lib/libpthread.so.0 (0x7ff567b22000+0xf800) [0x7ff567b31800] 13: /lib/libc.so.6 (sigprocmask+0x10) [0x7ff566ab59f0] 14: /usr/bin/X (0x400000+0x2948c) [0x42948c] 15: /usr/bin/X (0x400000+0x29a01) [0x429a01] 16: /usr/bin/X (0x400000+0x22f2c) [0x422f2c] 17: /lib/libc.so.6 (__libc_start_main+0xed) [0x7ff566aa213d] 18: /usr/bin/X (0x400000+0x231ad) [0x4231ad] Segmentation fault at address (nil) Fatal server error: Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. Server terminated with error (1). Closing log file. /usr/bin/xauth: file /var/run/slim.auth does not exist slim: waiting for X server to begin accepting connections X.Org X Server 1.11.1 Release Date: 2011-09-24 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.0-ARCH x86_64 Current Operating System: Linux z11 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 11:35:34 CEST 2011 x86_64 Kernel command line: root=/dev/disk/by-uuid/85fd2110-8df6-476e-8c53-dadb7b62bfa7 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux Build Date: 10 October 2011 08:55:30AM Current version of pixman: 0.22.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 20:19:31 2011 (==) Using config directory: "/etc/X11/xorg.conf.d" (EE) Failed to load module "vesa" (module does not exist, 0) (EE) Failed to load module "fbdev" (module does not exist, 0) (II) [KMS] Kernel modesetting enabled. . /usr/bin/xauth: file /home/master/.Xauthority does not exist /bin/bash: /home/master/.xinitrc: No such file or directory slim: waiting for X server to shut downServer terminated successfully (0). Closing log file. /usr/bin/xauth: file /var/run/slim.auth does not exist slim: waiting for X server to begin accepting connections X.Org X Server 1.11.1 Release Date: 2011-09-24 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.0-ARCH x86_64 Current Operating System: Linux z11 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 11:35:34 CEST 2011 x86_64 Kernel command line: root=/dev/disk/by-uuid/85fd2110-8df6-476e-8c53-dadb7b62bfa7 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux Build Date: 10 October 2011 08:55:30AM Current version of pixman: 0.22.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 20:19:44 2011 (==) Using config directory: "/etc/X11/xorg.conf.d" (EE) Failed to load module "vesa" (module does not exist, 0) (EE) Failed to load module "fbdev" (module does not exist, 0) (II) [KMS] Kernel modesetting enabled. . slim: pam_authenticate(): Conversation error Backtrace: 0: /usr/bin/X (xorg_backtrace+0x26) [0x566aa6] 1: /usr/bin/X (0x400000+0x16a719) [0x56a719] 2: /lib/libpthread.so.0 (0x7f2f7fe40000+0xf800) [0x7f2f7fe4f800] 3: /lib/libc.so.6 (memcpy+0xe1) [0x7f2f7ee23fc1] 4: /usr/bin/X (mieqEnqueue+0x8c) [0x5472ac] 5: /usr/bin/X (0x400000+0x46f34) [0x446f34] 6: /usr/bin/X (xf86PostKeyboardEvent+0x4b) [0x48214b] 7: /usr/lib/xorg/modules/input/evdev_drv.so (0x7f2f7b03d000+0x481e) [0x7f2f7b04181e] 8: /usr/bin/X (0x400000+0x6c9a7) [0x46c9a7] 9: /usr/bin/X (0x400000+0x9258e) [0x49258e] 10: /lib/libpthread.so.0 (0x7f2f7fe40000+0xf800) [0x7f2f7fe4f800] 11: /usr/bin/X (0x400000+0x16abf0) [0x56abf0] 12: /lib/libpthread.so.0 (0x7f2f7fe40000+0xf800) [0x7f2f7fe4f800] 13: /lib/libc.so.6 (sigprocmask+0x10) [0x7f2f7edd39f0] 14: /usr/bin/X (0x400000+0x2948c) [0x42948c] 15: /usr/bin/X (0x400000+0x29a01) [0x429a01] 16: /usr/bin/X (0x400000+0x22f2c) [0x422f2c] 17: /lib/libc.so.6 (__libc_start_main+0xed) [0x7f2f7edc013d] 18: /usr/bin/X (0x400000+0x231ad) [0x4231ad] Segmentation fault at address (nil) Fatal server error: Caught signal 11 (Segmentation fault). Server aborting Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. Server terminated with error (1). Closing log file. /usr/bin/xauth: file /var/run/slim.auth does not exist slim: waiting for X server to begin accepting connections X.Org X Server 1.11.1 Release Date: 2011-09-24 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.0-ARCH x86_64 Current Operating System: Linux z11 3.0-ARCH #1 SMP PREEMPT Fri Oct 7 11:35:34 CEST 2011 x86_64 Kernel command line: root=/dev/disk/by-uuid/85fd2110-8df6-476e-8c53-dadb7b62bfa7 ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux Build Date: 10 October 2011 08:55:30AM Current version of pixman: 0.22.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 14 20:22:27 2011 (==) Using config directory: "/etc/X11/xorg.conf.d" (EE) Failed to load module "vesa" (module does not exist, 0) (EE) Failed to load module "fbdev" (module does not exist, 0) (II) [KMS] Kernel modesetting enabled. . /usr/bin/xauth: file /home/master/.Xauthority does not exist xmodmap: unable to open file '/home/master/.Xmodmap' for reading xmodmap: 1 error encountered, aborting. Failed to read: session.ignoreBorder Setting default value Failed to read: session.forcePseudoTransparency Setting default value Failed to read: session.colorsPerChannel Setting default value Failed to read: session.doubleClickInterval Setting default value Failed to read: session.tabPadding Setting default value Failed to read: session.styleOverlay Setting default value Failed to read: session.slitlistFile Setting default value Failed to read: session.appsFile Setting default value Failed to read: session.tabsAttachArea Setting default value Failed to read: session.cacheLife Setting default value Failed to read: session.cacheMax Setting default value Failed to read: session.autoRaiseDelay Setting default value Failed to read: session.ignoreBorder Setting default value Failed to read: session.forcePseudoTransparency Setting default value Failed to read: session.colorsPerChannel Setting default value Failed to read: session.doubleClickInterval Setting default value Failed to read: session.tabPadding Setting default value Failed to read: session.styleOverlay Setting default value Failed to read: session.slitlistFile Setting default value Failed to read: session.appsFile Setting default value Failed to read: session.tabsAttachArea Setting default value Failed to read: session.cacheLife Setting default value Failed to read: session.cacheMax Setting default value Failed to read: session.autoRaiseDelay Setting default value Failed to read: session.screen0.opaqueMove Setting default value Failed to read: session.screen0.fullMaximization Setting default value Failed to read: session.screen0.maxIgnoreIncrement Setting default value Failed to read: session.screen0.maxDisableMove Setting default value Failed to read: session.screen0.maxDisableResize Setting default value |
rdf |
|
Темы:
1
Сообщения:
165
Участник с: 01 мая 2011
|
Чтобы попасть в меню груба (если стоит timeout 0), то жмем ESC (если память не изменяет) и держим… Там нажимаем “e” и добавляем в строчку с kernel единичку. В конце загрузки попросит пароль рута, демоны не загрузятся. ps. ESC надо зажать в конце POSTa (эта когда bios всякую фигню тестирует, память, диски). ps2. закомментировать slim в демонах и попробывать startx от пользователя. |
cmndralexgreen |
|
Темы:
22
Сообщения:
136
Участник с: 05 сентября 2009
|
У меня syslinux при старте жму еск и попадаю в boot: |
rdf |
|
Темы:
1
Сообщения:
165
Участник с: 01 мая 2011
|
Когда появится boot: нажми Tab. syslinux выведет список пунктов меню (чтото вроде arch archfallback off). Вводим arch 1. enter. Загрузимся в консоль. В rc.conf в демонах !slim. Дальше init 5. И можно попробовать startx. |
cmndralexgreen |
|
Темы:
22
Сообщения:
136
Участник с: 05 сентября 2009
|
Slim закоментил в хсы вошел, похоже проблема в нем. Щас попробую слим удалить и поставить заново. При попытке в командной строке вместо startx вызвать fluxbox - выдает ошибку: нет соединения с Хсервер. Возможно оно так и должно быть при “голом старте”? Пс. Когда ноги проскакивают помоему какието ошибки выдают, где можно почитать общее состояние дел? |