|
Участник с: 17 августа 2016
|
Проблема началась несколько дней назад, если начинаю играть в игры, минут через 20 система резко вешается намертво, на мышь и клаву не реагирует, вчера уже стала вешаться и без игр, сначало зависает курсор мыши, потом все остальное, вчера к зависшей системе смог подключится по ssh и вывести лог dmesg,
Last login: Tue Jun 26 21:48:01 2018 from 176.59.147.57
[[email protected] ~]$ dmesg
[ 0.000000] Linux version 4.17.2-1-ARCH ([email protected]) (gcc version 8.1.1 20180531 (GCC)) #1 SMP PREEMPT Sat Jun 16 11:08:59 UTC 2018
[ 0.000000] Command line: initrd=\initramfs-linux.img root=PARTUUID=be0aca50-35c9-4946-b736-330d0a45a0de rw
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] random: get_random_u32 called from bsp_init_amd+0x207/0x270 with crng_init=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd232fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd233000-0x00000000dd262fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd263000-0x00000000dd272fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dd273000-0x00000000dd7a9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dd7aa000-0x00000000de3a4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de3a5000-0x00000000de3a5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de3a6000-0x00000000de5abfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de5ac000-0x00000000de9f2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de9f3000-0x00000000deff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000deff4000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0xca80b018-0xca827e57] usable ==> usable
[ 0.000000] e820: update [mem 0xca80b018-0xca827e57] usable ==> usable
[ 0.000000] e820: update [mem 0xca7fd018-0xca80a057] usable ==> usable
[ 0.000000] e820: update [mem 0xca7fd018-0xca80a057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000ca7fd017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca7fd018-0x00000000ca80a057] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca80a058-0x00000000ca80b017] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca80b018-0x00000000ca827e57] usable
[ 0.000000] reserve setup_data: [mem 0x00000000ca827e58-0x00000000dd232fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000dd233000-0x00000000dd262fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000dd263000-0x00000000dd272fff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x00000000dd273000-0x00000000dd7a9fff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000dd7aa000-0x00000000de3a4fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000de3a5000-0x00000000de3a5fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de3a6000-0x00000000de5abfff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x00000000de5ac000-0x00000000de9f2fff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000de9f3000-0x00000000deff3fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000deff4000-0x00000000deffffff] usable
[ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000041effffff] usable
[ 0.000000] efi: EFI v32.31 by American Megatrends
[ 0.000000] efi: ACPI=0xdd26a000 ACPI 2.0=0xdd26a000 SMBIOS=0xf04c0 MPS=0xfd460
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/A88XM-PLUS, BIOS 2903 03/10/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000041f000000 aka 16880M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd750-0x000fd75f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x26e660000, 0x26e660fff] PGTABLE
[ 0.000000] BRK [0x26e661000, 0x26e661fff] PGTABLE
[ 0.000000] BRK [0x26e662000, 0x26e662fff] PGTABLE
[ 0.000000] BRK [0x26e663000, 0x26e663fff] PGTABLE
[ 0.000000] BRK [0x26e664000, 0x26e664fff] PGTABLE
[ 0.000000] BRK [0x26e665000, 0x26e665fff] PGTABLE
[ 0.000000] BRK [0x26e666000, 0x26e666fff] PGTABLE
[ 0.000000] BRK [0x26e667000, 0x26e667fff] PGTABLE
[ 0.000000] BRK [0x26e668000, 0x26e668fff] PGTABLE
[ 0.000000] BRK [0x26e669000, 0x26e669fff] PGTABLE
[ 0.000000] BRK [0x26e66a000, 0x26e66afff] PGTABLE
[ 0.000000] Secure boot disabled
[ 0.000000] RAMDISK: [mem 0x7f89f000-0x7fffefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000DD26A000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD26A080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD271640 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180313/tbfadt-624)
[ 0.000000] ACPI: DSDT 0x00000000DD26A198 0074A7 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000DD79F080 000040
[ 0.000000] ACPI: APIC 0x00000000DD271750 00007E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD2717D0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000DD271818 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: CRAT 0x00000000DD272920 000578 (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: HPET 0x00000000DD2718B0 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: UEFI 0x00000000DD2718E8 000042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: IVRS 0x00000000DD271930 0000D0 (v02 AMD BANTRY 00000001 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x00000000DD271A00 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DD271A38 000B9C (v01 AMD BANTRY 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DD2725D8 000346 (v02 AMD BANTRY 00000002 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41effc000-0x41effffff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000dd232fff]
[ 0.000000] node 0: [mem 0x00000000de3a5000-0x00000000de3a5fff]
[ 0.000000] node 0: [mem 0x00000000de5ac000-0x00000000de9f2fff]
[ 0.000000] node 0: [mem 0x00000000deff4000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[ 0.000000] On node 0 totalpages: 4179494
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 24 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14107 pages used for memmap
[ 0.000000] DMA32 zone: 902791 pages, LIFO batch:31
[ 0.000000] Normal zone: 51136 pages used for memmap
[ 0.000000] Normal zone: 3272704 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 97 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] efi_bgrt: Ignoring BGRT: invalid image address
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff][ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff][ 0.000000] PM: Registered nosave memory: [mem 0xca7fd000-0xca7fdfff][ 0.000000] PM: Registered nosave memory: [mem 0xca80a000-0xca80afff][ 0.000000] PM: Registered nosave memory: [mem 0xca80b000-0xca80bfff][ 0.000000] PM: Registered nosave memory: [mem 0xca827000-0xca827fff][ 0.000000] PM: Registered nosave memory: [mem 0xdd233000-0xdd262fff][ 0.000000] PM: Registered nosave memory: [mem 0xdd263000-0xdd272fff][ 0.000000] PM: Registered nosave memory: [mem 0xdd273000-0xdd7a9fff][ 0.000000] PM: Registered nosave memory: [mem 0xdd7aa000-0xde3a4fff][ 0.000000] PM: Registered nosave memory: [mem 0xde3a6000-0xde5abfff][ 0.000000] PM: Registered nosave memory: [mem 0xde9f3000-0xdeff3fff][ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff][ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff][ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfeb7ffff][ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff][ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff][ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff][ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff][ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff][ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff][ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff][ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff][ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff][ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff][ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff][ 0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4114163
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=be0aca50-35c9-4946-b736-330d0a45a0de rw
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16137652K/16717976K available (10252K kernel code, 1290K rwdata, 3488K rodata, 1476K init, 608K bss, 580324K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 32647 entries in 128 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[ 0.000000] RCU priority boosting: priority 1 delay 500 ms.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[ 0.000000] Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180313
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.019999] tsc: Fast TSC calibration using PIT
[ 0.023333] tsc: Detected 3990.018 MHz processor
[ 0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x73070e75f1b, max_idle_ns: 881591159795 ns[ 0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 7983.53 BogoMIPS (lpj=13300060)
[ 0.023333] pid_max: default: 32768 minimum: 301
[ 0.023333] Security Framework initialized
[ 0.023333] Yama: becoming mindful.
[ 0.030052] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.031862] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.031936] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.031994] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.032207] CPU: Physical Processor ID: 0
[ 0.032209] CPU: Processor Core ID: 0
[ 0.032210] mce: CPU supports 7 MCE banks
[ 0.032216] LVT offset 1 assigned for vector 0xf9
[ 0.032221] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.032221] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.032223] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.032223] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.032224] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.036046] Freeing SMP alternatives memory: 28K
[ 0.046666] smpboot: CPU0: AMD Athlon(tm) X4 860K Quad Core Processor (family: 0x15, model: 0x30, stepping: 0x1)
[ 0.060050] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.060065] ... version: 0
[ 0.060066] ... bit width: 48
[ 0.060068] ... generic registers: 6
[ 0.060070] ... value mask: 0000ffffffffffff
[ 0.060071] ... max period: 00007fffffffffff
[ 0.060072] ... fixed-purpose events: 0
[ 0.060073] ... event mask: 000000000000003f
[ 0.063382] Hierarchical SRCU implementation.
[ 0.073574] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.076732] smp: Bringing up secondary CPUs ...
[ 0.100091] x86: Booting SMP configuration:
[ 0.100096] .... node #0, CPUs: #1 #2 #3
[ 0.148940] smp: Brought up 1 node, 4 CPUs
[ 0.148940] smpboot: Max logical packages: 1
[ 0.148940] smpboot: Total of 4 processors activated (31932.15 BogoMIPS)
[ 0.150324] devtmpfs: initialized
[ 0.150324] x86/mm: Memory block size: 128MB
[ 0.151229] PM: Registering ACPI NVS region [mem 0xdd273000-0xdd7a9fff] (5468160 bytes)
[ 0.151229] PM: Registering ACPI NVS region [mem 0xde3a6000-0xde5abfff] (2121728 bytes)
[ 0.151229] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.151229] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.151229] pinctrl core: initialized pinctrl subsystem
[ 0.151229] RTC time: 14:49:18, date: 06/26/18
[ 0.151229] NET: Registered protocol family 16
[ 0.151229] cpuidle: using governor ladder
[ 0.151229] cpuidle: using governor menu
[ 0.151229] ACPI: bus type PCI registered
[ 0.151229] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5[ 0.151229] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.151229] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.151229] PCI: Using configuration type 1 for base access
[ 0.153366] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.153366] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.153426] ACPI: Added _OSI(Module Device)
[ 0.153427] ACPI: Added _OSI(Processor Device)
[ 0.153428] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153428] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.153429] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.157028] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.158923] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.159778] ACPI: Interpreter enabled
[ 0.159797] ACPI: (supports S0 S3 S4 S5)
[ 0.159798] ACPI: Using IOAPIC for interrupt routing
[ 0.159952] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.160286] ACPI: Enabled 8 GPEs in block 00 to 1F
[ 0.167835] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.167835] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.167835] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.167835] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.167835] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge[ 0.167948] PCI host bridge to bus 0000:00
[ 0.167949] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.167951] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.167952] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.167953] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.167954] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.167955] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.167956] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff window]
[ 0.167958] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.167966] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[ 0.168078] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[ 0.168200] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[ 0.168300] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[ 0.168395] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
[ 0.168425] pci 0000:00:03.1: enabling Extended Tags
[ 0.168459] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.168554] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[ 0.168678] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.168706] pci 0000:00:10.0: reg 0x10: [mem 0xfeb06000-0xfeb07fff 64bit]
[ 0.168810] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.168923] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[ 0.168951] pci 0000:00:10.1: reg 0x10: [mem 0xfeb04000-0xfeb05fff 64bit]
[ 0.169055] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.169164] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.169184] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.169192] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.169201] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.169209] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.169217] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.169226] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0c000-0xfeb0c7ff]
[ 0.169340] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.169357] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0b000-0xfeb0bfff]
[ 0.169489] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.169509] pci 0000:00:12.2: reg 0x10: [mem 0xfeb0a000-0xfeb0a0ff]
[ 0.169584] pci 0000:00:12.2: supports D1 D2
[ 0.169585] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169673] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.169689] pci 0000:00:13.0: reg 0x10: [mem 0xfeb09000-0xfeb09fff]
[ 0.169822] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.169842] pci 0000:00:13.2: reg 0x10: [mem 0xfeb08000-0xfeb080ff]
[ 0.169916] pci 0000:00:13.2: supports D1 D2
[ 0.169917] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.170016] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.170155] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.170178] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[ 0.170240] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.170322] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.170462] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.170582] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.170620] pci 0000:00:15.0: enabling Extended Tags
[ 0.170662] pci 0000:00:15.0: supports D1 D2
[ 0.170664] pci 0000:00:15.0: PME# supported from D0 D3hot D3cold
[ 0.170760] pci 0000:00:15.1: [1022:43a1] type 01 class 0x060400
[ 0.170799] pci 0000:00:15.1: enabling Extended Tags
[ 0.170840] pci 0000:00:15.1: supports D1 D2
[ 0.170841] pci 0000:00:15.1: PME# supported from D0 D3hot D3cold
[ 0.170943] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[ 0.171032] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[ 0.171114] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[ 0.171197] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[ 0.171288] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[ 0.171370] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[ 0.171503] pci 0000:01:00.0: [1002:67ef] type 00 class 0x030000
[ 0.171533] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.171546] pci 0000:01:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.171554] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.171562] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
[ 0.171570] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[ 0.171577] pci 0000:01:00.0: enabling Extended Tags
[ 0.171587] pci 0000:01:00.0: BAR 0: assigned to efifb
[ 0.171647] pci 0000:01:00.0: supports D1 D2
[ 0.171648] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.171728] pci 0000:01:00.1: [1002:aae0] type 00 class 0x040300
[ 0.171751] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
[ 0.171783] pci 0000:01:00.1: enabling Extended Tags
[ 0.171835] pci 0000:01:00.1: supports D1 D2
[ 0.171927] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 0.171931] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.171933] pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.171937] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.172001] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode)
[ 0.172009] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.172010] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.172011] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.172012] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.172013] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.172014] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.172015] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff window] (subtractive decode)
[ 0.172056] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.172134] pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
[ 0.172161] pci 0000:04:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.172184] pci 0000:04:00.0: reg 0x18: [mem 0xfe900000-0xfe900fff 64bit]
[ 0.172200] pci 0000:04:00.0: reg 0x20: [mem 0xf0300000-0xf0303fff 64bit pref]
[ 0.172297] pci 0000:04:00.0: supports D1 D2
[ 0.172298] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.172414] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.172419] pci 0000:00:15.1: bridge window [io 0xd000-0xdfff]
[ 0.172422] pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.172427] pci 0000:00:15.1: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[ 0.173025] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.173096] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.173169] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.173242] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
[ 0.173301] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.173355] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.173403] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.173449] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.173659] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.173659] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.173659] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.173659] vgaarb: loaded
[ 0.173659] pps_core: LinuxPPS API ver. 1 registered
[ 0.173659] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.173659] PTP clock support registered
[ 0.173659] EDAC MC: Ver: 3.0.0
[ 0.173659] Registered efivars operations
[ 0.180602] PCI: Using ACPI for IRQ routing
[ 0.182024] PCI: pci_cache_line_size set to 64 bytes
[ 0.182091] e820: reserve RAM buffer [mem 0xca7fd018-0xcbffffff]
[ 0.182093] e820: reserve RAM buffer [mem 0xca80b018-0xcbffffff]
[ 0.182094] e820: reserve RAM buffer [mem 0xdd233000-0xdfffffff]
[ 0.182095] e820: reserve RAM buffer [mem 0xde3a6000-0xdfffffff]
[ 0.182096] e820: reserve RAM buffer [mem 0xde9f3000-0xdfffffff]
[ 0.182097] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.182097] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[ 0.183339] NetLabel: Initializing
[ 0.183339] NetLabel: domain hash size = 128
[ 0.183339] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.183339] NetLabel: unlabeled traffic allowed by default
[ 0.183392] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.183397] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.186676] clocksource: Switched to clocksource tsc-early
[ 0.199024] VFS: Disk quotas dquot_6.6.0
[ 0.199044] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.199131] pnp: PnP ACPI init
[ 0.199292] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.199297] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.199371] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.199443] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.199446] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.199613] system 00:03: [io 0x0230-0x023f] has been reserved
[ 0.199614] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.199617] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.199919] pnp 00:04: [dma 0 disabled]
[ 0.200021] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.200072] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.200199] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.200202] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.200240] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.200452] pnp 00:08: [dma 0 disabled]
[ 0.200517] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.200823] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.200825] system 00:09: [io 0x040b] has been reserved
[ 0.200826] system 00:09: [io 0x04d6] has been reserved
[ 0.200827] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.200828] system 00:09: [io 0x0c14] has been reserved
[ 0.200829] system 00:09: [io 0x0c50-0x0c51] has been reserved
[ 0.200831] system 00:09: [io 0x0c52] has been reserved
[ 0.200832] system 00:09: [io 0x0c6c] has been reserved
[ 0.200833] system 00:09: [io 0x0c6f] has been reserved
[ 0.200834] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
[ 0.200835] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
[ 0.200836] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
[ 0.200837] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
[ 0.200839] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
[ 0.200840] system 00:09: [io 0x0800-0x089f] has been reserved
[ 0.200841] system 00:09: [io 0x0b00-0x0b0f] has been reserved
[ 0.200842] system 00:09: [io 0x0b20-0x0b3f] has been reserved
[ 0.200843] system 00:09: [io 0x0900-0x090f] has been reserved
[ 0.200844] system 00:09: [io 0x0910-0x091f] has been reserved
[ 0.200846] system 00:09: [io 0xfe00-0xfefe] has been reserved
[ 0.200847] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.200849] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.200850] system 00:09: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.200852] system 00:09: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.200853] system 00:09: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.200854] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.200858] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.201055] pnp: PnP ACPI: found 10 devices
[ 0.207134] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.207170] pci 0000:00:03.1: PCI bridge to [bus 01]
[ 0.207172] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.207176] pci 0000:00:03.1: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.207181] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.207185] pci 0000:00:14.4: PCI bridge to [bus 02]
[ 0.207196] pci 0000:00:15.0: PCI bridge to [bus 03]
[ 0.207205] pci 0000:00:15.1: PCI bridge to [bus 04]
[ 0.207207] pci 0000:00:15.1: bridge window [io 0xd000-0xdfff]
[ 0.207211] pci 0000:00:15.1: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.207214] pci 0000:00:15.1: bridge window [mem 0xf0300000-0xf03fffff 64bit pref]
[ 0.207219] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.207221] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.207222] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.207223] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.207224] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.207225] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.207227] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xffffffff window]
[ 0.207228] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.207229] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.207230] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.207231] pci_bus 0000:02: resource 4 [io 0x0000-0x03af window]
[ 0.207233] pci_bus 0000:02: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.207234] pci_bus 0000:02: resource 6 [io 0x03b0-0x03df window]
[ 0.207234] pci_bus 0000:02: resource 7 [io 0x0d00-0xffff window]
[ 0.207236] pci_bus 0000:02: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.207237] pci_bus 0000:02: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.207238] pci_bus 0000:02: resource 10 [mem 0xe0000000-0xffffffff window]
[ 0.207239] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.207240] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.207241] pci_bus 0000:04: resource 2 [mem 0xf0300000-0xf03fffff 64bit pref]
[ 0.207323] NET: Registered protocol family 2
[ 0.207468] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.207523] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.207775] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.207973] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.208038] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.208127] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.208241] NET: Registered protocol family 1
[ 0.397602] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c6 took 184574 usecs
[ 0.414299] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x6c6 took 16288 usecs
[ 0.414303] pci 0000:00:12.2: PME# does not work under D3, disabling it
[ 0.501036] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6c6 took 84685 usecs
[ 0.517741] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x6c6 took 16296 usecs
[ 0.517744] pci 0000:00:13.2: PME# does not work under D3, disabling it
[ 0.517779] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.517790] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[ 0.517846] PCI: CLS 64 bytes, default 64
[ 0.517893] Unpacking initramfs...
[ 0.612962] Freeing initrd memory: 7552K
[ 0.612976] AMD-Vi: IOMMU performance counters supported
[ 0.612980] AMD-Vi: Applying ATS write check workaround for IOMMU at 0000:00:00.2
[ 0.613118] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.613120] pci 0000:00:00.2: PCI INT A: not connected
[ 0.613306] iommu: Adding device 0000:00:02.0 to group 0
[ 0.613377] iommu: Adding device 0000:00:03.0 to group 1
[ 0.613392] iommu: Adding device 0000:00:03.1 to group 1
[ 0.613452] iommu: Adding device 0000:00:04.0 to group 2
[ 0.613524] iommu: Adding device 0000:00:10.0 to group 3
[ 0.613542] iommu: Adding device 0000:00:10.1 to group 3
[ 0.613596] iommu: Adding device 0000:00:11.0 to group 4
[ 0.613662] iommu: Adding device 0000:00:12.0 to group 5
[ 0.613676] iommu: Adding device 0000:00:12.2 to group 5
[ 0.613737] iommu: Adding device 0000:00:13.0 to group 6
[ 0.613753] iommu: Adding device 0000:00:13.2 to group 6
[ 0.613825] iommu: Adding device 0000:00:14.0 to group 7
[ 0.613839] iommu: Adding device 0000:00:14.2 to group 7
[ 0.613853] iommu: Adding device 0000:00:14.3 to group 7
[ 0.613906] iommu: Adding device 0000:00:14.4 to group 8
[ 0.613994] iommu: Adding device 0000:00:15.0 to group 9
[ 0.614015] iommu: Adding device 0000:00:15.1 to group 9
[ 0.614099] iommu: Adding device 0000:00:18.0 to group 10
[ 0.614114] iommu: Adding device 0000:00:18.1 to group 10
[ 0.614130] iommu: Adding device 0000:00:18.2 to group 10
[ 0.614145] iommu: Adding device 0000:00:18.3 to group 10
[ 0.614159] iommu: Adding device 0000:00:18.4 to group 10
[ 0.614175] iommu: Adding device 0000:00:18.5 to group 10
[ 0.614200] iommu: Adding device 0000:01:00.0 to group 1
[ 0.614213] iommu: Adding device 0000:01:00.1 to group 1
[ 0.614227] iommu: Adding device 0000:04:00.0 to group 9
[ 0.614660] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.614661] AMD-Vi: Extended features (0x800090a52):
[ 0.614662] PPR GT IA PC
[ 0.614664] AMD-Vi: Interrupt remapping enabled
[ 0.614916] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.616332] amd_uncore: AMD NB counters detected
[ 0.616542] LVT offset 0 assigned for vector 0x400
[ 0.616581] perf: AMD IBS detected (0x000001ff)
[ 0.616589] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.616654] Scanning for low memory corruption every 60 seconds
[ 0.617172] Initialise system trusted keyrings
[ 0.617183] Key type blacklist registered
[ 0.617239] workingset: timestamp_bits=41 max_order=22 bucket_order=0[ 0.618414] zbud: loaded
[ 0.618642] pstore: using lz4hc compression
[ 0.619881] Key type asymmetric registered
[ 0.619882] Asymmetric key parser 'x509' registered
[ 0.619904] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.619943] io scheduler noop registered
[ 0.619943] io scheduler deadline registered
[ 0.619978] io scheduler cfq registered (default)
[ 0.619979] io scheduler mq-deadline registered
[ 0.619980] io scheduler kyber registered
[ 0.619985] io scheduler bfq registered
[ 0.620542] efifb: probing for efifb
[ 0.620559] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[ 0.620560] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.620561] efifb: scrolling: redraw
[ 0.620563] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.622795] Console: switching to colour frame buffer device 128x48
[ 0.624883] fb0: EFI VGA frame buffer device
[ 0.624943] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.624952] ACPI: Power Button [PWRB]
[ 0.624984] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.624994] ACPI: Power Button [PWRF]
[ 0.625714] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.646388] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.647666] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.647918] NET: Registered protocol family 10
[ 0.650602] Segment Routing with IPv6
[ 0.650640] NET: Registered protocol family 17
[ 0.650864] RAS: Correctable Errors collector initialized.
[ 0.651060] microcode: CPU0: patch_level=0x06003106
[ 0.651066] microcode: CPU1: patch_level=0x06003106
[ 0.651073] microcode: CPU2: patch_level=0x06003106
[ 0.651077] microcode: CPU3: patch_level=0x06003106
[ 0.651117] microcode: Microcode Update Driver: v2.2.
[ 0.651137] sched_clock: Marking stable (651112164, 0)->(734712088, -83599924)
[ 0.651329] registered taskstats version 1
[ 0.651338] Loading compiled-in X.509 certificates
[ 0.651364] zswap: loaded using pool lzo/zbud
[ 0.653669] Key type big_key registered
[ 0.653930] Magic number: 6:227:840
[ 0.654003] hctosys: unable to open rtc device (rtc0)
[ 0.851897] Freeing unused kernel memory: 1476K
[ 0.851901] Write protecting the kernel read-only data: 16384k
[ 0.853282] Freeing unused kernel memory: 2016K
[ 0.854402] Freeing unused kernel memory: 608K
[ 0.931918] ACPI: bus type USB registered
[ 0.931944] usbcore: registered new interface driver usbfs
[ 0.931958] usbcore: registered new interface driver hub
[ 0.932005] usbcore: registered new device driver usb
[ 0.933155] SCSI subsystem initialized
[ 0.933173] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.933376] ehci-pci: EHCI PCI platform driver
[ 0.933383] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.933582] QUIRK: Enable AMD PLL fix
[ 0.933613] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.933620] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.933626] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.933636] ehci-pci 0000:00:12.2: debug port 1
[ 0.933719] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb0a000
[ 0.939789] libata version 3.00 loaded.
[ 0.947276] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.947345] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 0.947346] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.947348] usb usb1: Product: EHCI Host Controller
[ 0.947349] usb usb1: Manufacturer: Linux 4.17.2-1-ARCH ehci_hcd
[ 0.947350] usb usb1: SerialNumber: 0000:00:12.2
[ 0.947498] hub 1-0:1.0: USB hub found
[ 0.947506] hub 1-0:1.0: 5 ports detected
[ 0.947827] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.947834] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.947837] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.947846] ehci-pci 0000:00:13.2: debug port 1
[ 0.947883] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb08000
[ 0.960832] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.960991] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 0.960992] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.960994] usb usb2: Product: EHCI Host Controller
[ 0.960995] usb usb2: Manufacturer: Linux 4.17.2-1-ARCH ehci_hcd
[ 0.960996] usb usb2: SerialNumber: 0000:00:13.2
[ 0.961153] hub 2-0:1.0: USB hub found
[ 0.961165] hub 2-0:1.0: 5 ports detected
[ 0.961757] ohci-pci: OHCI PCI platform driver
[ 0.961881] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.961888] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 0.962058] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 0.962344] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 0.962346] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.962347] usb usb3: Product: xHCI Host Controller
[ 0.962348] usb usb3: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[ 0.962349] usb usb3: SerialNumber: 0000:00:10.0
[ 0.962506] hub 3-0:1.0: USB hub found
[ 0.962516] hub 3-0:1.0: 2 ports detected
[ 0.962645] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 0.962648] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 4
[ 0.962651] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 0.965481] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.965501] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[ 0.965502] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.965503] usb usb4: Product: xHCI Host Controller
[ 0.965504] usb usb4: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[ 0.965505] usb usb4: SerialNumber: 0000:00:10.0
[ 0.965701] hub 4-0:1.0: USB hub found
[ 0.965708] hub 4-0:1.0: 2 ports detected
[ 0.965914] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.965918] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
[ 0.966082] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x00000418
[ 0.966313] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.17
[ 0.966314] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.966315] usb usb5: Product: xHCI Host Controller
[ 0.966316] usb usb5: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[ 0.966317] usb usb5: SerialNumber: 0000:00:10.1
[ 0.966417] hub 5-0:1.0: USB hub found
[ 0.966424] hub 5-0:1.0: 2 ports detected
[ 0.966531] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 0.966534] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[ 0.966536] xhci_hcd 0000:00:10.1: Host supports USB 3.0 SuperSpeed
[ 0.969509] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.969528] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.17
[ 0.969529] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.969530] usb usb6: Product: xHCI Host Controller
[ 0.969531] usb usb6: Manufacturer: Linux 4.17.2-1-ARCH xhci-hcd
[ 0.969532] usb usb6: SerialNumber: 0000:00:10.1
[ 0.969718] hub 6-0:1.0: USB hub found
[ 0.969725] hub 6-0:1.0: 2 ports detected
[ 0.969828] ahci 0000:00:11.0: version 3.0
[ 0.970184] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.970187] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio
[ 0.970190] ahci 0000:00:11.0: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
[ 0.971339] scsi host0: ahci
[ 0.971510] scsi host1: ahci
[ 0.971603] scsi host2: ahci
[ 0.971689] scsi host3: ahci
[ 0.971800] scsi host4: ahci
[ 0.971905] scsi host5: ahci
[ 0.972039] scsi host6: ahci
[ 0.972140] scsi host7: ahci
[ 0.972182] ata1: SATA max UDMA/133 abar [email protected] port 0xfeb0c100 irq 35
[ 0.972184] ata2: SATA max UDMA/133 abar [email protected] port 0xfeb0c180 irq 36
[ 0.972185] ata3: SATA max UDMA/133 abar [email protected] port 0xfeb0c200 irq 37
[ 0.972187] ata4: SATA max UDMA/133 abar [email protected] port 0xfeb0c280 irq 38
[ 0.972188] ata5: SATA max UDMA/133 abar [email protected] port 0xfeb0c300 irq 39
[ 0.972190] ata6: SATA max UDMA/133 abar [email protected] port 0xfeb0c380 irq 40
[ 0.972192] ata7: SATA max UDMA/133 abar [email protected] port 0xfeb0c400 irq 41
[ 0.972193] ata8: SATA max UDMA/133 abar [email protected] port 0xfeb0c480 irq 42
[ 0.972358] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 0.972364] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7
[ 0.972402] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0b000
[ 1.034939] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[ 1.034941] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.034942] usb usb7: Product: OHCI PCI host controller
[ 1.034943] usb usb7: Manufacturer: Linux 4.17.2-1-ARCH ohci_hcd
[ 1.034944] usb usb7: SerialNumber: 0000:00:12.0
[ 1.035196] hub 7-0:1.0: USB hub found
[ 1.035206] hub 7-0:1.0: 5 ports detected
[ 1.035500] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.035509] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[ 1.035543] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb09000
[ 1.098347] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.17
[ 1.098349] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.098350] usb usb8: Product: OHCI PCI host controller
[ 1.098351] usb usb8: Manufacturer: Linux 4.17.2-1-ARCH ohci_hcd
[ 1.098352] usb usb8: SerialNumber: 0000:00:13.0
[ 1.098594] hub 8-0:1.0: USB hub found
[ 1.098604] hub 8-0:1.0: 5 ports detected
[ 1.266176] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.268622] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.268695] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.268721] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.286690] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 1.416890] usb 8-4: new low-speed USB device number 2 using ohci-pci[ 1.423567] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.426884] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.426927] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.427501] ata5.00: ATA-8: SSD Smartbuy 60GB, S8FM07.7, max UDMA/133[ 1.427503] ata5.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.427838] ata5.00: configured for UDMA/133
[ 1.428858] usb 3-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 1.428859] usb 3-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.428860] usb 3-2: Product: USB 2.0 Hub
[ 1.429639] ata3.00: ATAPI: ASUS DRW-24F1MT, 1.00, max UDMA/100
[ 1.430150] hub 3-2:1.0: USB hub found
[ 1.430482] hub 3-2:1.0: 4 ports detected
[ 1.430497] ata3.00: configured for UDMA/100
[ 1.452717] ata1.00: ATA-8: ST3320613AS, CC2F, max UDMA/133
[ 1.452720] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.495289] ata1.00: configured for UDMA/133
[ 1.495594] scsi 0:0:0:0: Direct-Access ATA ST3320613AS CC2F PQ: 0 ANSI: 5
[ 1.496888] usb 7-1: new full-speed USB device number 2 using ohci-pci
[ 1.520031] tsc: Refined TSC clocksource calibration: 3990.008 MHz
[ 1.520037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x7306fb14344, max_idle_ns: 881590777778 ns
[ 1.520093] clocksource: Switched to clocksource tsc
[ 1.605233] usb 8-4: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
[ 1.605239] usb 8-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.605241] usb 8-4: Product: USB Keyboard
[ 1.605242] usb 8-4: Manufacturer: SIGMACHIP
[ 1.609009] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.619342] usbcore: registered new interface driver usbhid
[ 1.619345] usbhid: USB HID core driver
[ 1.620472] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb8/8-4/8-4:1.0/0003:1C4F:0002.0001/input/input2
[ 1.650244] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.677142] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:13.0-4/input0
[ 1.677387] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb8/8-4/8-4:1.1/0003:1C4F:0002.0002/input/input3
[ 1.679932] ata2.00: ATA-8: WDC WD6400AADS-00M2B0, 01.00A01, max UDMA/133
[ 1.679934] ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.682059] ata2.00: configured for UDMA/133
[ 1.682400] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AADS-0 0A01 PQ: 0 ANSI: 5
[ 1.687064] usb 7-1: New USB device found, idVendor=046d, idProduct=c534, bcdDevice=29.00
[ 1.687077] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.687079] usb 7-1: Product: USB Receiver
[ 1.687082] usb 7-1: Manufacturer: Logitech
[ 1.687259] scsi 2:0:0:0: CD-ROM ASUS DRW-24F1MT 1.00 PQ: 0 ANSI: 5
[ 1.695437] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.0/0003:046D:C534.0003/input/input4
[ 1.733856] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:13.0-4/input1
[ 1.736144] scsi 4:0:0:0: Direct-Access ATA SSD Smartbuy 60G 07.7 PQ: 0 ANSI: 5
[ 1.739038] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.739056] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.739059] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.739084] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.739102] sd 4:0:0:0: [sdc] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
[ 1.739111] sd 4:0:0:0: [sdc] Write Protect is off
[ 1.739112] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.739125] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.739164] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.739178] sd 0:0:0:0: [sda] Write Protect is off
[ 1.739179] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.739195] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.742491] sdc: sdc1 sdc2
[ 1.743016] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1.763952] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.763955] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.764209] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.777808] sda: sda1
[ 1.778205] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.790192] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-1/input0
[ 1.794508] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb7/7-1/7-1:1.1/0003:046D:C534.0004/input/input5
[ 1.799385] sdb: sdb1
[ 1.799743] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.808203] random: fast init done
[ 1.820015] raid6: sse2x1 gen() 7297 MB/s
[ 1.850169] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-1/input1
[ 1.876697] raid6: sse2x1 xor() 5326 MB/s
[ 1.933350] raid6: sse2x2 gen() 10446 MB/s
[ 1.990028] raid6: sse2x2 xor() 7458 MB/s
[ 2.046675] raid6: sse2x4 gen() 7393 MB/s
[ 2.103340] raid6: sse2x4 xor() 6621 MB/s
[ 2.103341] raid6: using algorithm sse2x2 gen() 10446 MB/s
[ 2.103342] raid6: .... xor() 7458 MB/s, rmw enabled
[ 2.103343] raid6: using ssse3x2 recovery algorithm
[ 2.106018] xor: automatically using best checksumming function avx
[ 2.126283] Btrfs loaded, crc32c=crc32c-intel
[ 2.127228] BTRFS: device fsid 9a717087-2810-4b9d-8a42-b19a4ecbe028 devid 1 transid 184 /dev/sda1
[ 2.127366] BTRFS: device label /home devid 1 transid 3612 /dev/sdb1
[ 2.128334] BTRFS: device fsid ed8a47c4-9672-43cc-9601-dfa3f9866059 devid 1 transid 3062 /dev/sdc2
[ 2.380037] usb 7-4: new full-speed USB device number 3 using ohci-pci
[ 2.395630] BTRFS info (device sdc2): disk space caching is enabled
[ 2.395633] BTRFS info (device sdc2): has skinny extents
[ 2.403360] BTRFS info (device sdc2): enabling ssd optimizations
[ 2.563954] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[ 2.566085] usb 7-4: New USB device found, idVendor=1397, idProduct=0301, bcdDevice= 0.01
[ 2.566090] usb 7-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.566093] usb 7-4: Product: C-1U
[ 2.566096] usb 7-4: Manufacturer: BEHRINGER
[ 2.580495] systemd[1]: Detected architecture x86-64.
[ 2.584227] systemd[1]: Set hostname to <Mutter>.
[ 2.763123] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.764127] systemd[1]: Created slice system-getty.slice.
[ 2.764244] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.764274] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.764328] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.764383] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 2.765553] systemd[1]: Listening on Process Core Dump Socket.
[ 2.765639] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.765694] systemd[1]: Reached target Login Prompts.
[ 2.765776] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.817176] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.817221] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.817272] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 2.817311] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.861656] vboxdrv: loading out-of-tree module taints kernel.
[ 2.865995] vboxdrv: Found 4 processor cores
[ 2.866064] BTRFS info (device sdc2): disk space caching is enabled
[ 2.882367] systemd-journald[259]: Received request to flush runtime journal from PID 1
[ 2.886879] vboxdrv: TSC mode is Invariant, tentative frequency 3990006888 Hz
[ 2.886881] vboxdrv: Successfully loaded version 5.2.12 (interface 0x00290001)
[ 2.915388] VBoxPciLinuxInit
[ 2.915395] vboxpci: IOMMU found
[ 2.932627] VBoxNetAdp: Successfully started.
[ 2.953133] VBoxNetFlt: Successfully started.
[ 3.019664] systemd-journald[259]: File /var/log/journal/4d400cabea5b44ddb09a6981d9b3cbef/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 3.207342] acpi_cpufreq: overriding BIOS provided _PSD data
[ 3.208087] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.249742] rtc_cmos 00:05: RTC can wake from S4
[ 3.250202] rtc_cmos 00:05: registered as rtc0
[ 3.250370] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.253607] Linux agpgart interface v0.103
[ 3.256088] parport_pc 00:04: reported by Plug and Play ACPI
[ 3.256154] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 3.288602] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.288605] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection
[ 3.288766] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 3.291602] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 3.291733] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 3.291844] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[ 3.309720] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 3.331891] cryptd: max_cpu_qlen set to 1000
[ 3.332370] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 3.332423] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 3.332424] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 3.334923] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.334953] r8169 0000:04:00.0: enabling device (0000 -> 0003)
[ 3.351079] r8169 0000:04:00.0 eth0: RTL8168g/8111g at 0x (ptrval), 2c:4d:54:d8:78:d8, XID 0c000800 IRQ 45
[ 3.351082] r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.352457] AVX version of gcm_enc/dec engaged.
[ 3.352458] AES CTR mode by8 optimization enabled
[ 3.362009] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 3.362013] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.362014] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.362015] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.362017] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 3.362017] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.362020] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 3.362021] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 3.362023] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 3.364133] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:01:00.1/sound/card1/input7
[ 3.364231] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:01:00.1/sound/card1/input8
[ 3.364288] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:01:00.1/sound/card1/input9
[ 3.364363] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:01:00.1/sound/card1/input10
[ 3.364434] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:01:00.1/sound/card1/input11
[ 3.386739] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[ 3.386808] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[ 3.386860] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[ 3.386922] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[ 3.386989] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[ 3.392675] BTRFS info (device sdb1): disk space caching is enabled
[ 3.392677] BTRFS info (device sdb1): has skinny extents
[ 3.393238] BTRFS info (device sda1): disk space caching is enabled
[ 3.393239] BTRFS info (device sda1): has skinny extents
[ 3.421719] random: crng init done
[ 3.421721] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.429630] asus_wmi: ASUS WMI generic driver loaded
[ 3.432810] asus_wmi: Initialization: 0x0
[ 3.432848] asus_wmi: BIOS WMI version: 0.9
[ 3.432910] asus_wmi: SFUN value: 0x0
[ 3.434287] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input17
[ 3.434633] asus_wmi: Number of fans: 1
[ 3.435482] ppdev: user-space parallel port driver
[ 3.502412] mousedev: PS/2 mouse device common for all mice
[ 3.505179] r8169 0000:04:00.0 enp4s0: renamed from eth0
[ 3.559139] kvm: Nested Virtualization enabled
[ 3.559142] kvm: Nested Paging enabled
[ 3.559693] [drm] amdgpu kernel modesetting enabled.
[ 3.564997] MCE: In-kernel MCE decoding enabled.
[ 3.565220] AMD IOMMUv2 driver by Joerg Roedel <[email protected]>
[ 3.568475] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.568477] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.577190] Parsing CRAT table with 1 nodes
[ 3.577195] Ignoring ACPI CRAT on non-APU system
[ 3.577198] Virtual CRAT table created for CPU
[ 3.577199] Parsing CRAT table with 1 nodes
[ 3.577200] Creating topology SYSFS entries
[ 3.577211] Topology: Add CPU node
[ 3.577212] Finished initializing topology
[ 3.577284] kfd kfd: Initialized module
[ 3.577649] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 3.577650] fb: switching to amdgpudrmfb from EFI VGA
[ 3.577672] Console: switching to colour dummy device 80x25
[ 3.578092] [drm] initializing kernel modesetting (POLARIS11 0x1002:0x67EF 0x1458:0x22DD 0xCF).
[ 3.578105] [drm] register mmio base: 0xFEA00000
[ 3.578106] [drm] register mmio size: 262144
[ 3.578113] [drm] probing gen 2 caps for device 1022:1426 = 1733c42/e[ 3.578115] [drm] probing mlw for device 1022:1426 = 1733c42
[ 3.578117] [drm] add ip block number 0 <vi_common>
[ 3.578118] [drm] add ip block number 1 <gmc_v8_0>
[ 3.578119] [drm] add ip block number 2 <tonga_ih>
[ 3.578120] [drm] add ip block number 3 <powerplay>
[ 3.578121] [drm] add ip block number 4 <dm>
[ 3.578122] [drm] add ip block number 5 <gfx_v8_0>
[ 3.578122] [drm] add ip block number 6 <sdma_v3_0>
[ 3.578123] [drm] add ip block number 7 <uvd_v6_0>
[ 3.578124] [drm] add ip block number 8 <vce_v3_0>
[ 3.578129] kfd kfd: skipped device 1002:67ef, PCI rejects atomics
[ 3.578139] [drm] UVD is enabled in VM mode
[ 3.578140] [drm] UVD ENC is enabled in VM mode
[ 3.578142] [drm] VCE enabled in VM mode
[ 3.578396] amdgpu 0000:01:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[ 3.578458] ATOM BIOS: xxx-xxx-xxx
[ 3.578506] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 3.581692] amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[ 3.581695] amdgpu 0000:01:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[ 3.581705] [drm] Detected VRAM RAM=4096M, BAR=256M
[ 3.581706] [drm] RAM width 128bits GDDR5
[ 3.581769] [TTM] Zone kernel: Available graphics memory: 8217960 kiB
[ 3.581770] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 3.581771] [TTM] Initializing pool allocator
[ 3.581776] [TTM] Initializing DMA pool allocator
[ 3.581808] [drm] amdgpu: 4096M of VRAM memory ready
[ 3.581810] [drm] amdgpu: 4096M of GTT memory ready.
[ 3.581825] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 3.581865] [drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
[ 3.582781] [drm] Chained IB support enabled!
[ 3.584068] usbcore: registered new interface driver snd-usb-audio
[ 3.589620] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[ 3.592875] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[ 3.630990] BTRFS info (device sdb1): checking UUID tree
[ 3.664829] [drm] DM_PPLIB: values for Engine clock
[ 3.664831] [drm] DM_PPLIB: 21400
[ 3.664832] [drm] DM_PPLIB: 48100
[ 3.664832] [drm] DM_PPLIB: 76000
[ 3.664833] [drm] DM_PPLIB: 102000
[ 3.664833] [drm] DM_PPLIB: 110200
[ 3.664833] [drm] DM_PPLIB: 113800
[ 3.664834] [drm] DM_PPLIB: 117200
[ 3.664834] [drm] DM_PPLIB: 121200
[ 3.664835] [drm] DM_PPLIB: Validation clocks:
[ 3.664836] [drm] DM_PPLIB: engine_max_clock: 121200
[ 3.664836] [drm] DM_PPLIB: memory_max_clock: 175000
[ 3.664837] [drm] DM_PPLIB: level : 0
[ 3.664838] [drm] DM_PPLIB: values for Memory clock
[ 3.664838] [drm] DM_PPLIB: 30000
[ 3.664839] [drm] DM_PPLIB: 175000
[ 3.664839] [drm] DM_PPLIB: Validation clocks:
[ 3.664839] [drm] DM_PPLIB: engine_max_clock: 121200
[ 3.664840] [drm] DM_PPLIB: memory_max_clock: 175000
[ 3.664840] [drm] DM_PPLIB: level : 0
[ 3.683489] [drm] Display Core initialized with v3.1.38!
[ 3.708773] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.708774] [drm] Driver supports precise vblank timestamp query.
[ 3.760587] [drm] UVD and UVD ENC initialized successfully.
[ 3.871547] [drm] VCE initialized successfully.
[ 4.383626] [drm] fb mappable at 0xE056A000
[ 4.383629] [drm] vram apper at 0xE0000000
[ 4.383630] [drm] size 8294400
[ 4.383631] [drm] fb depth is 24
[ 4.383631] [drm] pitch is 7680
[ 4.383720] fbcon: amdgpudrmfb (fb0) is primary device
[ 4.432756] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 4.449438] Console: switching to colour frame buffer device 240x67
[ 4.472142] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device[ 4.487387] [drm] Initialized amdgpu 3.25.0 20150101 for 0000:01:00.0 on minor 0
[ 4.505861] r8169 0000:04:00.0 enp4s0: link down
[ 4.505916] r8169 0000:04:00.0 enp4s0: link down
[ 4.505952] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 5.060230] systemd-journald[259]: File /var/log/journal/4d400cabea5b44ddb09a6981d9b3cbef/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 7.010215] fuse init (API version 7.26)
[ 7.923008] r8169 0000:04:00.0 enp4s0: link up
[ 7.923031] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready[ 10.398931] rfkill: input handler disabled
[ 900.106558] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx timeout, last signaled seq=85866, last emitted seq=85868
[ 900.106568] [drm] IP block:gmc_v8_0 is hung!
[ 900.106573] [drm] IP block:gfx_v8_0 is hung!
[ 900.106621] [drm] GPU recovery disabled.
[[email protected] ~]$
Так же у меня месяц назад перестал работать слот PCI -E, вставил во второй слот, до последнего момента все работало.
|
