Мониторинг сети

Здравствуйте! Возможно ли какими либо утилитами мониторить в реальном времени соединения по следующим критериям: процесс,ip:порт,статус,скорость?

Пример:

Process        IP:port             Status         Up/Down
firefox;       213.180.193.3:80;   Established;   15/200kib/s;
firefox;       104.28.6.44:443;    Established;   20/600kib/s;
netstat + cat /proc/net/wireless ? :)
TCPDUMP


To print all packets arriving at or departing from sundown:

tcpdump host sundown

To print traffic between helios and either hot or ace:

tcpdump host helios and \( hot or ace \)

To print all IP packets between ace and any host except helios:

 tcpdump ip host ace and not helios

To print all traffic between local hosts and hosts at Berkeley:

tcpdump net ucb-ether

To print all ftp traffic through internet gateway snup: (note that the expression is quoted to prevent the shell from (mis-)interpreting the parentheses):

 tcpdump 'gateway snup and (port ftp or ftp-data)'

To print traffic neither sourced from nor destined for local hosts (if you gateway to one other net, this stuff should never make it onto your local net).

 tcpdump ip and not net localnet

To print the start and end packets (the SYN and FIN packets) of each TCP conversation that involves a non-local host.

tcpdump 'tcp[tcpflags] & (tcp-syn|tcp-fin) != 0 and not src and dst net localnet'

To print all IPv4 HTTP packets to and from port 80, i.e. print only packets that contain data, not, for example, SYN and FIN packets and ACK-only packets. (IPv6 is left as an exercise for the reader.)

 tcpdump 'tcp port 80 and (((ip[2:2] - ((ip[0]&0xf)<<2)) - ((tcp[12]&0xf0)>>2)) != 0)'

To print IP packets longer than 576 bytes sent through gateway snup:

tcpdump 'gateway snup and ip[2:2] > 576'

To print IP broadcast or multicast packets that were not sent via Ethernet broadcast or multicast:

 tcpdump 'ether[0] & 1 = 0 and ip[16] >= 224'

To print all ICMP packets that are not echo requests/replies (i.e., not ping packets):

tcpdump 'icmp[icmptype] != icmp-echo and icmp[icmptype] != icmp-echoreply'
Посмотри iptraf, точнее в ArhLinux iptraf-ng - может многое.
Ошибки не исчезают с опытом - они просто умнеют
Посмотреть -
lsof -i
"Мониторить" скорее всего не получится в таком виде, т.к. программы мониторинга оперируют обычно с IP источника а не с именем программы.
sysdig возможно поможет
 
Зарегистрироваться или войдите чтобы оставить сообщение.