nvidia 9600 GT

genues	# 8 лет, 9 месяцев назад
Темы: 24 Сообщения: 281 Участник с: 26 сентября 2011	Доброе время суток! Последнее время (месяц примерно) у меня периодически (бывает по пару раз на дню) наглухо виснет комп. Картинка на мониках (у меня их два) зависает и всё, не на что реакции нет, помогает только ресет. При этом в логах ничего нет. В попытках разрулить проблему, решил попробовать использовать драва nvidia, вместо nouveau. И вот тут неожиданно создалась проблема, не стартуют нормально иксы. Несколько раз мигает логотип nvidia растянутый на оба моника, потом всё сваливается в вывод загрузки. Иксы стартует lightdm. Вот конфиг для иксов: Section "ServerLayout" Identifier "TwinLayout" Screen 0 "metaScreen" 0 0 EndSection Section "Monitor" Identifier "Monitor0" Option "Enable" "true" EndSection Section "Monitor" Identifier "Monitor1" Option "Enable" "true" EndSection Section "Device" Identifier "Card0" Driver "nvidia" VendorName "NVIDIA Corporation" #refer to the link below for more information on each of the following options. Option "HorizSync" "DFP-0: 28-33; CRT-0: 28-33" Option "VertRefresh" "DFP-0: 43-73; CRT-0: 43-73" Option "ConnectMonitor" "DFP-0, CRT-1" Option "MetaModeOrientation" "DFP-0 LeftOf CRT-1" Option "MetaModes" "1280x1024, 1280x1024" EndSection Section "Screen" Identifier "metaScreen" Device "Card0" Monitor "Monitor0" DefaultDepth 24 # Option "TwinView" "True" SubSection "Display" Modes "2560x1024" EndSubSection EndSection Вот лог иксов: X.Org X Server 1.14.4 Release Date: 2013-10-31 [ 29.123] X Protocol Version 11, Revision 0 [ 29.123] Build Operating System: Linux 3.11.6-1-ARCH x86_64 [ 29.123] Current Operating System: Linux noname 3.12.1-1-ARCH #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013 x86_64 [ 29.123] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=617aa818-87eb-43bb-bdc6-6e8451490ae2 rw [ 29.123] Build Date: 01 November 2013 05:10:48PM [ 29.123] [ 29.123] Current version of pixman: 0.32.4 [ 29.123] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 29.123] Markers: (--) probed, () from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 29.123] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 27 11:34:46 2013 [ 29.123] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 29.124] (==) ServerLayout "TwinLayout" [ 29.124] () \|-->Screen "metaScreen" (0) [ 29.124] () \| \|-->Monitor "Monitor0" [ 29.124] () \| \|-->Device "Card0" [ 29.124] (==) Automatically adding devices [ 29.124] (==) Automatically enabling devices [ 29.124] (==) Automatically adding GPU devices [ 29.124] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 29.124] Entry deleted from font path. [ 29.124] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 29.124] Entry deleted from font path. [ 29.125] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 29.125] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 29.125] Entry deleted from font path. [ 29.125] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 29.125] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/, /usr/share/fonts/Type1/ [ 29.125] (==) ModulePath set to "/usr/lib/xorg/modules" [ 29.125] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 29.125] (II) Loader magic: 0x7fdc20 [ 29.125] (II) Module ABI versions: [ 29.125] X.Org ANSI C Emulation: 0.4 [ 29.125] X.Org Video Driver: 14.1 [ 29.125] X.Org XInput driver : 19.1 [ 29.125] X.Org Server Extension : 7.0 [ 29.125] (II) xfree86: Adding drm device (/dev/dri/card0) [ 29.126] (--) PCI:(0:1:0:0) 10de:0622:1458:3480 rev 161, Mem @ 0xdc000000/16777216, 0xc0000000/268435456, 0xda000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288 [ 29.126] Initializing built-in extension Generic Event Extension [ 29.126] Initializing built-in extension SHAPE [ 29.126] Initializing built-in extension MIT-SHM [ 29.126] Initializing built-in extension XInputExtension [ 29.126] Initializing built-in extension XTEST [ 29.126] Initializing built-in extension BIG-REQUESTS [ 29.126] Initializing built-in extension SYNC [ 29.126] Initializing built-in extension XKEYBOARD [ 29.126] Initializing built-in extension XC-MISC [ 29.126] Initializing built-in extension SECURITY [ 29.126] Initializing built-in extension XINERAMA [ 29.126] Initializing built-in extension XFIXES [ 29.126] Initializing built-in extension RENDER [ 29.126] Initializing built-in extension RANDR [ 29.126] Initializing built-in extension COMPOSITE [ 29.126] Initializing built-in extension DAMAGE [ 29.126] Initializing built-in extension MIT-SCREEN-SAVER [ 29.126] Initializing built-in extension DOUBLE-BUFFER [ 29.126] Initializing built-in extension RECORD [ 29.126] Initializing built-in extension DPMS [ 29.126] Initializing built-in extension X-Resource [ 29.126] Initializing built-in extension XVideo [ 29.126] Initializing built-in extension XVideo-MotionCompensation [ 29.126] Initializing built-in extension XFree86-VidModeExtension [ 29.126] Initializing built-in extension XFree86-DGA [ 29.126] Initializing built-in extension XFree86-DRI [ 29.126] Initializing built-in extension DRI2 [ 29.126] (II) LoadModule: "glx" [ 29.127] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 29.144] (II) Module glx: vendor="NVIDIA Corporation" [ 29.144] compiled for 4.0.2, module version = 1.0.0 [ 29.144] Module class: X.Org Server Extension [ 29.144] (II) NVIDIA GLX Module 331.20 Wed Oct 30 17:36:48 PDT 2013 [ 29.144] Loading extension GLX [ 29.144] (II) LoadModule: "nvidia" [ 29.144] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 29.145] (II) Module nvidia: vendor="NVIDIA Corporation" [ 29.145] compiled for 4.0.2, module version = 1.0.0 [ 29.145] Module class: X.Org Video Driver [ 29.145] (II) NVIDIA dlloader X Driver 331.20 Wed Oct 30 17:16:53 PDT 2013 [ 29.145] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 29.145] (++) using VT number 1 [ 29.145] (II) Loading sub module "fb" [ 29.145] (II) LoadModule: "fb" [ 29.145] (II) Loading /usr/lib/xorg/modules/libfb.so [ 29.145] (II) Module fb: vendor="X.Org Foundation" [ 29.145] compiled for 1.14.4, module version = 1.0.0 [ 29.145] ABI class: X.Org ANSI C Emulation, version 0.4 [ 29.145] (WW) Unresolved symbol: fbGetGCPrivateKey [ 29.145] (II) Loading sub module "wfb" [ 29.145] (II) LoadModule: "wfb" [ 29.145] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 29.146] (II) Module wfb: vendor="X.Org Foundation" [ 29.146] compiled for 1.14.4, module version = 1.0.0 [ 29.146] ABI class: X.Org ANSI C Emulation, version 0.4 [ 29.146] (II) Loading sub module "ramdac" [ 29.146] (II) LoadModule: "ramdac" [ 29.146] (II) Module "ramdac" already built-in [ 29.146] () NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 29.146] (==) NVIDIA(0): RGB weight 888 [ 29.146] (==) NVIDIA(0): Default visual is TrueColor [ 29.146] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 29.146] () NVIDIA(0): Option "MetaModeOrientation" "DFP-0 LeftOf CRT-1" [ 29.146] () NVIDIA(0): Option "HorizSync" "DFP-0: 28-33; CRT-0: 28-33" [ 29.146] () NVIDIA(0): Option "VertRefresh" "DFP-0: 43-73; CRT-0: 43-73" [ 29.146] () NVIDIA(0): Option "MetaModes" "1280x1024, 1280x1024" [ 29.146] () NVIDIA(0): Enabling 2D acceleration [ 29.885] (II) NVIDIA(0): Display (LG Electronics L1750S (CRT-1)) does not support [ 29.885] (II) NVIDIA(0): NVIDIA 3D Vision stereo. [ 29.932] (II) NVIDIA(0): Display (HannStar Display Corp HX171DP (DFP-0)) does not [ 29.932] (II) NVIDIA(0): support NVIDIA 3D Vision stereo. [ 29.932] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102) [ 29.933] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0) [ 29.933] (--) NVIDIA(0): Memory: 524288 kBytes [ 29.933] (--) NVIDIA(0): VideoBIOS: 62.94.11.00.03 [ 29.933] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 29.934] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0 [ 29.934] (--) NVIDIA(0): CRT-0 [ 29.934] (--) NVIDIA(0): LG Electronics L1750S (CRT-1) (connected) [ 29.934] (--) NVIDIA(0): TV-0 [ 29.935] (--) NVIDIA(0): HannStar Display Corp HX171DP (DFP-0) (boot, connected) [ 29.935] (--) NVIDIA(0): DFP-1 [ 29.935] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 29.935] (--) NVIDIA(0): LG Electronics L1750S (CRT-1): 400.0 MHz maximum pixel clock [ 29.935] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock [ 29.935] (--) NVIDIA(0): HannStar Display Corp HX171DP (DFP-0): Internal Dual Link TMDS [ 29.935] (--) NVIDIA(0): HannStar Display Corp HX171DP (DFP-0): 330.0 MHz maximum pixel clock [ 29.935] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 29.935] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock [ 29.935] () NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 29.935] () NVIDIA(0): device LG Electronics L1750S (CRT-1) (Using EDID [ 29.935] () NVIDIA(0): frequencies has been enabled on all display devices.) [ 29.936] () NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 29.936] () NVIDIA(0): device HannStar Display Corp HX171DP (DFP-0) (Using EDID [ 29.936] () NVIDIA(0): frequencies has been enabled on all display devices.) [ 29.937] (WW) NVIDIA(0): Unable to find all display devices requested in MetaMode [ 29.937] (WW) NVIDIA(0): Orientation string "DFP-0 LeftOf CRT-1". [ 29.937] (II) NVIDIA(0): Validated MetaModes: [ 29.937] (II) NVIDIA(0): "1280x1024,1280x1024" [ 29.937] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024 [ 29.961] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config [ 29.961] (--) NVIDIA(0): option [ 29.961] (--) Depth 24 pixmap format is 32 bpp [ 29.961] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access. [ 29.964] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 29.964] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 29.964] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 29.964] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 29.964] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 29.964] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 29.964] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 29.964] (II) NVIDIA(0): Config Options in the README. [ 29.966] (II) NVIDIA(0): Setting mode "1280x1024,1280x1024" [ 30.012] Loading extension NV-GLX [ 30.023] (==) NVIDIA(0): Disabling shared memory pixmaps [ 30.023] (==) NVIDIA(0): Backing store disabled [ 30.023] (==) NVIDIA(0): Silken mouse enabled [ 30.023] (==) NVIDIA(0): DPMS enabled [ 30.023] Loading extension NV-CONTROL [ 30.024] Loading extension XINERAMA [ 30.024] (WW) NVIDIA(0): Option "ConnectMonitor" is not used [ 30.024] (WW) NVIDIA(0): Option "Enable" is not used [ 30.024] (II) Loading sub module "dri2" [ 30.024] (II) LoadModule: "dri2" [ 30.024] (II) Module "dri2" already built-in [ 30.024] (II) NVIDIA(0): [DRI2] Setup complete [ 30.024] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 30.024] (--) RandR disabled [ 30.030] (II) Initializing extension GLX [ 30.076] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 30.076] () Power Button: Applying InputClass "evdev keyboard catchall" [ 30.076] () Power Button: Applying InputClass "evdev keyboard catchall" [ 30.076] (II) LoadModule: "evdev" [ 30.077] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 30.077] (II) Module evdev: vendor="X.Org Foundation" [ 30.077] compiled for 1.14.3, module version = 2.8.2 [ 30.077] Module class: X.Org XInput Driver [ 30.077] ABI class: X.Org XInput driver, version 19.1 [ 30.077] (II) Using input driver 'evdev' for 'Power Button' [ 30.077] () Power Button: always reports core events [ 30.077] () evdev: Power Button: Device: "/dev/input/event1" [ 30.077] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 30.077] (--) evdev: Power Button: Found keys [ 30.077] (II) evdev: Power Button: Configuring as keyboard [ 30.077] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1" [ 30.077] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 30.077] () Option "xkb_rules" "evdev" [ 30.077] () Option "xkb_model" "logitech_base" [ 30.077] () Option "xkb_layout" "us,ru(winkeys)" [ 30.077] () Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 30.105] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 30.105] () Power Button: Applying InputClass "evdev keyboard catchall" [ 30.105] () Power Button: Applying InputClass "evdev keyboard catchall" [ 30.105] (II) Using input driver 'evdev' for 'Power Button' [ 30.105] () Power Button: always reports core events [ 30.105] () evdev: Power Button: Device: "/dev/input/event0" [ 30.105] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 30.105] (--) evdev: Power Button: Found keys [ 30.105] (II) evdev: Power Button: Configuring as keyboard [ 30.105] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0" [ 30.105] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 30.105] () Option "xkb_rules" "evdev" [ 30.105] () Option "xkb_model" "logitech_base" [ 30.105] () Option "xkb_layout" "us,ru(winkeys)" [ 30.105] () Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 30.106] (II) config/udev: Adding drm device (/dev/dri/card0) [ 30.106] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2) [ 30.106] (II) No input driver specified, ignoring this device. [ 30.106] (II) This device may have been added with another device file. [ 30.106] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7) [ 30.106] (II) No input driver specified, ignoring this device. [ 30.106] (II) This device may have been added with another device file. [ 30.106] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6) [ 30.106] (II) No input driver specified, ignoring this device. [ 30.106] (II) This device may have been added with another device file. [ 30.107] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5) [ 30.107] (II) No input driver specified, ignoring this device. [ 30.107] (II) This device may have been added with another device file. [ 30.107] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event4) [ 30.107] (II) No input driver specified, ignoring this device. [ 30.107] (II) This device may have been added with another device file. [ 30.107] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event3) [ 30.107] (II) No input driver specified, ignoring this device. [ 30.107] (II) This device may have been added with another device file. [ 30.108] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/event9) [ 30.108] () Logitech Unifying Device. Wireless PID:1024: Applying InputClass "evdev pointer catchall" [ 30.108] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1024' [ 30.108] () Logitech Unifying Device. Wireless PID:1024: always reports core events [ 30.108] () evdev: Logitech Unifying Device. Wireless PID:1024: Device: "/dev/input/event9" [ 30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Vendor 0x46d Product 0xc52b [ 30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found 20 mouse buttons [ 30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found scroll wheel(s) [ 30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found relative axes [ 30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found x and y relative axes [ 30.108] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Configuring as mouse [ 30.108] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Adding scrollwheel support [ 30.108] () evdev: Logitech Unifying Device. Wireless PID:1024: YAxisMapping: buttons 4 and 5 [ 30.108] () evdev: Logitech Unifying Device. Wireless PID:1024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 30.108] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/input/input12/event9" [ 30.108] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1024" (type: MOUSE, id 8) [ 30.108] (II) evdev: Logitech Unifying Device. Wireless PID:1024: initialized for relative axes. [ 30.108] () Logitech Unifying Device. Wireless PID:1024: (accel) keeping acceleration scheme 1 [ 30.108] () Logitech Unifying Device. Wireless PID:1024: (accel) acceleration profile 0 [ 30.108] () Logitech Unifying Device. Wireless PID:1024: (accel) acceleration factor: 2.000 [ 30.108] () Logitech Unifying Device. Wireless PID:1024: (accel) acceleration threshold: 4 [ 30.108] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/mouse0) [ 30.108] (II) No input driver specified, ignoring this device. [ 30.108] (II) This device may have been added with another device file. [ 30.109] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2011 (/dev/input/event10) [ 30.109] () Logitech Unifying Device. Wireless PID:2011: Applying InputClass "evdev keyboard catchall" [ 30.109] () Logitech Unifying Device. Wireless PID:2011: Applying InputClass "evdev keyboard catchall" [ 30.109] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2011' [ 30.109] () Logitech Unifying Device. Wireless PID:2011: always reports core events [ 30.109] () evdev: Logitech Unifying Device. Wireless PID:2011: Device: "/dev/input/event10" [ 30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Vendor 0x46d Product 0xc52b [ 30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found 1 mouse buttons [ 30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found scroll wheel(s) [ 30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found relative axes [ 30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing relative x/y axes to exist. [ 30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found absolute axes [ 30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing absolute x/y axes to exist. [ 30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found keys [ 30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as mouse [ 30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as keyboard [ 30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Adding scrollwheel support [ 30.109] () evdev: Logitech Unifying Device. Wireless PID:2011: YAxisMapping: buttons 4 and 5 [ 30.109] () evdev: Logitech Unifying Device. Wireless PID:2011: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 30.109] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/input/input13/event10" [ 30.109] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2011" (type: KEYBOARD, id 9) [ 30.109] () Option "xkb_rules" "evdev" [ 30.109] () Option "xkb_model" "logitech_base" [ 30.109] () Option "xkb_layout" "us,ru(winkeys)" [ 30.109] () Option "xkb_options" "grp:caps_toggle,grp_led:scroll" [ 30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: initialized for relative axes. [ 30.109] (WW) evdev: Logitech Unifying Device. Wireless PID:2011: ignoring absolute axes. [ 30.109] () Logitech Unifying Device. Wireless PID:2011: (accel) keeping acceleration scheme 1 [ 30.109] () Logitech Unifying Device. Wireless PID:2011: (accel) acceleration profile 0 [ 30.109] () Logitech Unifying Device. Wireless PID:2011: (accel) acceleration factor: 2.000 [ 30.109] (*) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration threshold: 4 [ 30.110] (II) config/udev: Adding input device PC Speaker (/dev/input/event8) [ 30.110] (II) No input driver specified, ignoring this device. [ 30.110] (II) This device may have been added with another device file. [ 30.240] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Close [ 30.240] (II) UnloadModule: "evdev" [ 30.240] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Close [ 30.240] (II) UnloadModule: "evdev" [ 30.240] (II) evdev: Power Button: Close [ 30.240] (II) UnloadModule: "evdev" [ 30.240] (II) evdev: Power Button: Close [ 30.240] (II) UnloadModule: "evdev" [ 30.761] (II) NVIDIA(GPU-0): Deleting GPU-0 [ 30.802] (EE) Server terminated successfully (0). Closing log file. Может кто подскажет, в какую сторону копать? По вопросу зависонов и/или по запуску иксов? :) Спасибо

# 8 лет, 9 месяцев назад

Сообщения: 281

Участник с: 26 сентября 2011

Доброе время суток!

Последнее время (месяц примерно) у меня периодически (бывает по пару раз на дню) наглухо виснет комп. Картинка на мониках (у меня их два) зависает и всё, не на что реакции нет, помогает только ресет. При этом в логах ничего нет.

В попытках разрулить проблему, решил попробовать использовать драва nvidia, вместо nouveau.
И вот тут неожиданно создалась проблема, не стартуют нормально иксы. Несколько раз мигает логотип nvidia растянутый на оба моника, потом всё сваливается в вывод загрузки. Иксы стартует lightdm.

Вот конфиг для иксов:

Section "ServerLayout"
    Identifier     "TwinLayout"
    Screen         0 "metaScreen" 0 0
EndSection
Section "Monitor"
    Identifier     "Monitor0"
    Option         "Enable" "true"
EndSection
Section "Monitor"
    Identifier     "Monitor1"
    Option         "Enable" "true"
EndSection
Section "Device"
    Identifier     "Card0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    #refer to the link below for more information on each of the following options.
    Option         "HorizSync"          "DFP-0: 28-33; CRT-0: 28-33"
    Option         "VertRefresh"        "DFP-0: 43-73; CRT-0: 43-73"
    Option         "ConnectMonitor" "DFP-0, CRT-1"
    Option         "MetaModeOrientation" "DFP-0 LeftOf CRT-1"
    Option         "MetaModes"          "1280x1024, 1280x1024"
EndSection
Section "Screen"
    Identifier     "metaScreen"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth    24
#    Option         "TwinView" "True"
    SubSection "Display"
        Modes          "2560x1024"
    EndSubSection
EndSection

Вот лог иксов:

X.Org X Server 1.14.4
Release Date: 2013-10-31
[    29.123] X Protocol Version 11, Revision 0
[    29.123] Build Operating System: Linux 3.11.6-1-ARCH x86_64
[    29.123] Current Operating System: Linux noname 3.12.1-1-ARCH #1 SMP PREEMPT Thu Nov 21 08:18:42 CET 2013 x86_64
[    29.123] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=617aa818-87eb-43bb-bdc6-6e8451490ae2 rw
[    29.123] Build Date: 01 November 2013  05:10:48PM
[    29.123]
[    29.123] Current version of pixman: 0.32.4
[    29.123] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    29.123] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    29.123] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 27 11:34:46 2013
[    29.123] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    29.124] (==) ServerLayout "TwinLayout"
[    29.124] (**) |-->Screen "metaScreen" (0)
[    29.124] (**) |   |-->Monitor "Monitor0"
[    29.124] (**) |   |-->Device "Card0"
[    29.124] (==) Automatically adding devices
[    29.124] (==) Automatically enabling devices
[    29.124] (==) Automatically adding GPU devices
[    29.124] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    29.124] 	Entry deleted from font path.
[    29.124] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    29.124] 	Entry deleted from font path.
[    29.125] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    29.125] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    29.125] 	Entry deleted from font path.
[    29.125] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    29.125] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    29.125] (==) ModulePath set to "/usr/lib/xorg/modules"
[    29.125] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    29.125] (II) Loader magic: 0x7fdc20
[    29.125] (II) Module ABI versions:
[    29.125] 	X.Org ANSI C Emulation: 0.4
[    29.125] 	X.Org Video Driver: 14.1
[    29.125] 	X.Org XInput driver : 19.1
[    29.125] 	X.Org Server Extension : 7.0
[    29.125] (II) xfree86: Adding drm device (/dev/dri/card0)
[    29.126] (--) PCI:*(0:1:0:0) 10de:0622:1458:3480 rev 161, Mem @ 0xdc000000/16777216, 0xc0000000/268435456, 0xda000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
[    29.126] Initializing built-in extension Generic Event Extension
[    29.126] Initializing built-in extension SHAPE
[    29.126] Initializing built-in extension MIT-SHM
[    29.126] Initializing built-in extension XInputExtension
[    29.126] Initializing built-in extension XTEST
[    29.126] Initializing built-in extension BIG-REQUESTS
[    29.126] Initializing built-in extension SYNC
[    29.126] Initializing built-in extension XKEYBOARD
[    29.126] Initializing built-in extension XC-MISC
[    29.126] Initializing built-in extension SECURITY
[    29.126] Initializing built-in extension XINERAMA
[    29.126] Initializing built-in extension XFIXES
[    29.126] Initializing built-in extension RENDER
[    29.126] Initializing built-in extension RANDR
[    29.126] Initializing built-in extension COMPOSITE
[    29.126] Initializing built-in extension DAMAGE
[    29.126] Initializing built-in extension MIT-SCREEN-SAVER
[    29.126] Initializing built-in extension DOUBLE-BUFFER
[    29.126] Initializing built-in extension RECORD
[    29.126] Initializing built-in extension DPMS
[    29.126] Initializing built-in extension X-Resource
[    29.126] Initializing built-in extension XVideo
[    29.126] Initializing built-in extension XVideo-MotionCompensation
[    29.126] Initializing built-in extension XFree86-VidModeExtension
[    29.126] Initializing built-in extension XFree86-DGA
[    29.126] Initializing built-in extension XFree86-DRI
[    29.126] Initializing built-in extension DRI2
[    29.126] (II) LoadModule: "glx"
[    29.127] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    29.144] (II) Module glx: vendor="NVIDIA Corporation"
[    29.144] 	compiled for 4.0.2, module version = 1.0.0
[    29.144] 	Module class: X.Org Server Extension
[    29.144] (II) NVIDIA GLX Module  331.20  Wed Oct 30 17:36:48 PDT 2013
[    29.144] Loading extension GLX
[    29.144] (II) LoadModule: "nvidia"
[    29.144] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    29.145] (II) Module nvidia: vendor="NVIDIA Corporation"
[    29.145] 	compiled for 4.0.2, module version = 1.0.0
[    29.145] 	Module class: X.Org Video Driver
[    29.145] (II) NVIDIA dlloader X Driver  331.20  Wed Oct 30 17:16:53 PDT 2013
[    29.145] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    29.145] (++) using VT number 1
[    29.145] (II) Loading sub module "fb"
[    29.145] (II) LoadModule: "fb"
[    29.145] (II) Loading /usr/lib/xorg/modules/libfb.so
[    29.145] (II) Module fb: vendor="X.Org Foundation"
[    29.145] 	compiled for 1.14.4, module version = 1.0.0
[    29.145] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    29.145] (WW) Unresolved symbol: fbGetGCPrivateKey
[    29.145] (II) Loading sub module "wfb"
[    29.145] (II) LoadModule: "wfb"
[    29.145] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    29.146] (II) Module wfb: vendor="X.Org Foundation"
[    29.146] 	compiled for 1.14.4, module version = 1.0.0
[    29.146] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    29.146] (II) Loading sub module "ramdac"
[    29.146] (II) LoadModule: "ramdac"
[    29.146] (II) Module "ramdac" already built-in
[    29.146] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    29.146] (==) NVIDIA(0): RGB weight 888
[    29.146] (==) NVIDIA(0): Default visual is TrueColor
[    29.146] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    29.146] (**) NVIDIA(0): Option "MetaModeOrientation" "DFP-0 LeftOf CRT-1"
[    29.146] (**) NVIDIA(0): Option "HorizSync" "DFP-0: 28-33; CRT-0: 28-33"
[    29.146] (**) NVIDIA(0): Option "VertRefresh" "DFP-0: 43-73; CRT-0: 43-73"
[    29.146] (**) NVIDIA(0): Option "MetaModes" "1280x1024, 1280x1024"
[    29.146] (**) NVIDIA(0): Enabling 2D acceleration
[    29.885] (II) NVIDIA(0): Display (LG Electronics L1750S (CRT-1)) does not support
[    29.885] (II) NVIDIA(0):     NVIDIA 3D Vision stereo.
[    29.932] (II) NVIDIA(0): Display (HannStar Display Corp HX171DP (DFP-0)) does not
[    29.932] (II) NVIDIA(0):     support NVIDIA 3D Vision stereo.
[    29.932] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    29.933] (II) NVIDIA(0): NVIDIA GPU GeForce 9600 GT (G94) at PCI:1:0:0 (GPU-0)
[    29.933] (--) NVIDIA(0): Memory: 524288 kBytes
[    29.933] (--) NVIDIA(0): VideoBIOS: 62.94.11.00.03
[    29.933] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    29.934] (--) NVIDIA(0): Valid display device(s) on GeForce 9600 GT at PCI:1:0:0
[    29.934] (--) NVIDIA(0):     CRT-0
[    29.934] (--) NVIDIA(0):     LG Electronics L1750S (CRT-1) (connected)
[    29.934] (--) NVIDIA(0):     TV-0
[    29.935] (--) NVIDIA(0):     HannStar Display Corp HX171DP (DFP-0) (boot, connected)
[    29.935] (--) NVIDIA(0):     DFP-1
[    29.935] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    29.935] (--) NVIDIA(0): LG Electronics L1750S (CRT-1): 400.0 MHz maximum pixel clock
[    29.935] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[    29.935] (--) NVIDIA(0): HannStar Display Corp HX171DP (DFP-0): Internal Dual Link TMDS
[    29.935] (--) NVIDIA(0): HannStar Display Corp HX171DP (DFP-0): 330.0 MHz maximum pixel clock
[    29.935] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    29.935] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
[    29.935] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    29.935] (**) NVIDIA(0):     device LG Electronics L1750S (CRT-1) (Using EDID
[    29.935] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    29.936] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    29.936] (**) NVIDIA(0):     device HannStar Display Corp HX171DP (DFP-0) (Using EDID
[    29.936] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    29.937] (WW) NVIDIA(0): Unable to find all display devices requested in MetaMode
[    29.937] (WW) NVIDIA(0):     Orientation string "DFP-0 LeftOf CRT-1".
[    29.937] (II) NVIDIA(0): Validated MetaModes:
[    29.937] (II) NVIDIA(0):     "1280x1024,1280x1024"
[    29.937] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[    29.961] (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
[    29.961] (--) NVIDIA(0):     option
[    29.961] (--) Depth 24 pixmap format is 32 bpp
[    29.961] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    29.964] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    29.964] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    29.964] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    29.964] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    29.964] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    29.964] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    29.964] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    29.964] (II) NVIDIA(0):     Config Options in the README.
[    29.966] (II) NVIDIA(0): Setting mode "1280x1024,1280x1024"
[    30.012] Loading extension NV-GLX
[    30.023] (==) NVIDIA(0): Disabling shared memory pixmaps
[    30.023] (==) NVIDIA(0): Backing store disabled
[    30.023] (==) NVIDIA(0): Silken mouse enabled
[    30.023] (==) NVIDIA(0): DPMS enabled
[    30.023] Loading extension NV-CONTROL
[    30.024] Loading extension XINERAMA
[    30.024] (WW) NVIDIA(0): Option "ConnectMonitor" is not used
[    30.024] (WW) NVIDIA(0): Option "Enable" is not used
[    30.024] (II) Loading sub module "dri2"
[    30.024] (II) LoadModule: "dri2"
[    30.024] (II) Module "dri2" already built-in
[    30.024] (II) NVIDIA(0): [DRI2] Setup complete
[    30.024] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    30.024] (--) RandR disabled
[    30.030] (II) Initializing extension GLX
[    30.076] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    30.076] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.076] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.076] (II) LoadModule: "evdev"
[    30.077] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    30.077] (II) Module evdev: vendor="X.Org Foundation"
[    30.077] 	compiled for 1.14.3, module version = 2.8.2
[    30.077] 	Module class: X.Org XInput Driver
[    30.077] 	ABI class: X.Org XInput driver, version 19.1
[    30.077] (II) Using input driver 'evdev' for 'Power Button'
[    30.077] (**) Power Button: always reports core events
[    30.077] (**) evdev: Power Button: Device: "/dev/input/event1"
[    30.077] (--) evdev: Power Button: Vendor 0 Product 0x1
[    30.077] (--) evdev: Power Button: Found keys
[    30.077] (II) evdev: Power Button: Configuring as keyboard
[    30.077] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event1"
[    30.077] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    30.077] (**) Option "xkb_rules" "evdev"
[    30.077] (**) Option "xkb_model" "logitech_base"
[    30.077] (**) Option "xkb_layout" "us,ru(winkeys)"
[    30.077] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll"
[    30.105] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    30.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.105] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    30.105] (II) Using input driver 'evdev' for 'Power Button'
[    30.105] (**) Power Button: always reports core events
[    30.105] (**) evdev: Power Button: Device: "/dev/input/event0"
[    30.105] (--) evdev: Power Button: Vendor 0 Product 0x1
[    30.105] (--) evdev: Power Button: Found keys
[    30.105] (II) evdev: Power Button: Configuring as keyboard
[    30.105] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event0"
[    30.105] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    30.105] (**) Option "xkb_rules" "evdev"
[    30.105] (**) Option "xkb_model" "logitech_base"
[    30.105] (**) Option "xkb_layout" "us,ru(winkeys)"
[    30.105] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll"
[    30.106] (II) config/udev: Adding drm device (/dev/dri/card0)
[    30.106] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
[    30.106] (II) No input driver specified, ignoring this device.
[    30.106] (II) This device may have been added with another device file.
[    30.106] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event7)
[    30.106] (II) No input driver specified, ignoring this device.
[    30.106] (II) This device may have been added with another device file.
[    30.106] (II) config/udev: Adding input device HDA Intel Front Mic (/dev/input/event6)
[    30.106] (II) No input driver specified, ignoring this device.
[    30.106] (II) This device may have been added with another device file.
[    30.107] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event5)
[    30.107] (II) No input driver specified, ignoring this device.
[    30.107] (II) This device may have been added with another device file.
[    30.107] (II) config/udev: Adding input device HDA Intel Line Out (/dev/input/event4)
[    30.107] (II) No input driver specified, ignoring this device.
[    30.107] (II) This device may have been added with another device file.
[    30.107] (II) config/udev: Adding input device HDA Intel Front Headphone (/dev/input/event3)
[    30.107] (II) No input driver specified, ignoring this device.
[    30.107] (II) This device may have been added with another device file.
[    30.108] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/event9)
[    30.108] (**) Logitech Unifying Device. Wireless PID:1024: Applying InputClass "evdev pointer catchall"
[    30.108] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1024'
[    30.108] (**) Logitech Unifying Device. Wireless PID:1024: always reports core events
[    30.108] (**) evdev: Logitech Unifying Device. Wireless PID:1024: Device: "/dev/input/event9"
[    30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Vendor 0x46d Product 0xc52b
[    30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found 20 mouse buttons
[    30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found scroll wheel(s)
[    30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found relative axes
[    30.108] (--) evdev: Logitech Unifying Device. Wireless PID:1024: Found x and y relative axes
[    30.108] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Configuring as mouse
[    30.108] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Adding scrollwheel support
[    30.108] (**) evdev: Logitech Unifying Device. Wireless PID:1024: YAxisMapping: buttons 4 and 5
[    30.108] (**) evdev: Logitech Unifying Device. Wireless PID:1024: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    30.108] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/input/input12/event9"
[    30.108] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1024" (type: MOUSE, id 8)
[    30.108] (II) evdev: Logitech Unifying Device. Wireless PID:1024: initialized for relative axes.
[    30.108] (**) Logitech Unifying Device. Wireless PID:1024: (accel) keeping acceleration scheme 1
[    30.108] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration profile 0
[    30.108] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration factor: 2.000
[    30.108] (**) Logitech Unifying Device. Wireless PID:1024: (accel) acceleration threshold: 4
[    30.108] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1024 (/dev/input/mouse0)
[    30.108] (II) No input driver specified, ignoring this device.
[    30.108] (II) This device may have been added with another device file.
[    30.109] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2011 (/dev/input/event10)
[    30.109] (**) Logitech Unifying Device. Wireless PID:2011: Applying InputClass "evdev keyboard catchall"
[    30.109] (**) Logitech Unifying Device. Wireless PID:2011: Applying InputClass "evdev keyboard catchall"
[    30.109] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2011'
[    30.109] (**) Logitech Unifying Device. Wireless PID:2011: always reports core events
[    30.109] (**) evdev: Logitech Unifying Device. Wireless PID:2011: Device: "/dev/input/event10"
[    30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Vendor 0x46d Product 0xc52b
[    30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found 1 mouse buttons
[    30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found scroll wheel(s)
[    30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found relative axes
[    30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing relative x/y axes to exist.
[    30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found absolute axes
[    30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Forcing absolute x/y axes to exist.
[    30.109] (--) evdev: Logitech Unifying Device. Wireless PID:2011: Found keys
[    30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as mouse
[    30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Configuring as keyboard
[    30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Adding scrollwheel support
[    30.109] (**) evdev: Logitech Unifying Device. Wireless PID:2011: YAxisMapping: buttons 4 and 5
[    30.109] (**) evdev: Logitech Unifying Device. Wireless PID:2011: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    30.109] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.2/0003:046D:C52B.0004/input/input13/event10"
[    30.109] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2011" (type: KEYBOARD, id 9)
[    30.109] (**) Option "xkb_rules" "evdev"
[    30.109] (**) Option "xkb_model" "logitech_base"
[    30.109] (**) Option "xkb_layout" "us,ru(winkeys)"
[    30.109] (**) Option "xkb_options" "grp:caps_toggle,grp_led:scroll"
[    30.109] (II) evdev: Logitech Unifying Device. Wireless PID:2011: initialized for relative axes.
[    30.109] (WW) evdev: Logitech Unifying Device. Wireless PID:2011: ignoring absolute axes.
[    30.109] (**) Logitech Unifying Device. Wireless PID:2011: (accel) keeping acceleration scheme 1
[    30.109] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration profile 0
[    30.109] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration factor: 2.000
[    30.109] (**) Logitech Unifying Device. Wireless PID:2011: (accel) acceleration threshold: 4
[    30.110] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    30.110] (II) No input driver specified, ignoring this device.
[    30.110] (II) This device may have been added with another device file.
[    30.240] (II) evdev: Logitech Unifying Device. Wireless PID:2011: Close
[    30.240] (II) UnloadModule: "evdev"
[    30.240] (II) evdev: Logitech Unifying Device. Wireless PID:1024: Close
[    30.240] (II) UnloadModule: "evdev"
[    30.240] (II) evdev: Power Button: Close
[    30.240] (II) UnloadModule: "evdev"
[    30.240] (II) evdev: Power Button: Close
[    30.240] (II) UnloadModule: "evdev"
[    30.761] (II) NVIDIA(GPU-0): Deleting GPU-0
[    30.802] (EE) Server terminated successfully (0). Closing log file.

Может кто подскажет, в какую сторону копать? По вопросу зависонов и/или по запуску иксов? :)
Спасибо

binaryshadow	# 8 лет, 9 месяцев назад
Темы: 16 Сообщения: 453 Участник с: 30 августа 2011	Может быть это поможет.

genues	# 8 лет, 9 месяцев назад
Темы: 24 Сообщения: 281 Участник с: 26 сентября 2011	Может быть это поможет. Спасибо, попробую! Память я уже потестил, а вот до харда пока не дошёл.

genues	# 8 лет, 9 месяцев назад
Темы: 24 Сообщения: 281 Участник с: 26 сентября 2011	Проверил жесткий диск - ошибок нет. Уважаемые, кто-нибудь что-нибудь про видяйку присоветует? :)

binaryshadow	# 8 лет, 9 месяцев назад
Темы: 16 Сообщения: 453 Участник с: 30 августа 2011	Ждать обновления ядра и дров или откатывать.

genues	# 8 лет, 9 месяцев назад
Темы: 24 Сообщения: 281 Участник с: 26 сентября 2011	binaryshadow Ждать обновления ядра и дров или откатывать. Печально... Спасибо.

Perfect_Gentleman	# 8 лет, 9 месяцев назад
Темы: 55 Сообщения: 1039 Участник с: 29 октября 2012	genues, такая же видюха, блоб, linux-ck, всё окей.

teplovoz	# 8 лет, 9 месяцев назад
Темы: 7 Сообщения: 1046 Участник с: 28 мая 2012	Такая карта , монитор один , работает отлично!

genues	# 8 лет, 9 месяцев назад
Темы: 24 Сообщения: 281 Участник с: 26 сентября 2011	Сам понимаю, что должно работать. Но, не вижу траблов в конфигах логах. Неужто мать сдохла?!

Perfect_Gentleman	# 8 лет, 9 месяцев назад
Темы: 55 Сообщения: 1039 Участник с: 29 октября 2012	genues, поробуй поставить linux-ck и дрова под это ядро соотвественно.