NVIDIA\X не стабилен [РЕШЕНО]

TANK	# 9 лет, 3 месяца назад
Темы: 14 Сообщения: 51 Участник с: 12 января 2013	Создавал уже тему. После обновления снова всё полетело. Переставил систему, но ничто уже не помогало. Вычитал что дрова 319.17 должны поддерживать новый X. Поставил из aur nvidia-beta. Версия такая же что и в репах, но почему то заработала. Пару дней прожил без проблем. Но позже на ровном месте снова начала твориться Н.Е.Х. Проблема появлялась даже на свободных драйверах. No protocol specified Geany: cannot open display [ 14.061] X.Org X Server 1.14.1 Release Date: 2013-04-17 [ 14.061] X Protocol Version 11, Revision 0 [ 14.061] Build Operating System: Linux 3.8.7-1-ARCH x86_64 [ 14.061] Current Operating System: Linux localhost 3.9.2-1-ARCH #1 SMP PREEMPT Sat May 11 20:31:08 CEST 2013 x86_64 [ 14.061] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8a7d1718-5f3d-4c8d-a457-8c6a8ad73118 ro vga=0x031b plymouth --boot-up [ 14.061] Build Date: 17 April 2013 02:37:06PM [ 14.061] [ 14.061] Current version of pixman: 0.30.0 [ 14.061] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 14.061] Markers: (--) probed, () from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 14.061] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 15 04:02:40 2013 [ 14.092] (==) Using config file: "/etc/X11/xorg.conf" [ 14.092] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 14.145] (==) ServerLayout "Layout0" [ 14.145] () \|-->Screen "Screen0" (0) [ 14.145] () \| \|-->Monitor "Monitor0" [ 14.145] () \| \|-->Device "Device0" [ 14.145] () \|-->Input Device "Keyboard0" [ 14.145] () \|-->Input Device "Mouse0" [ 14.145] (==) Automatically adding devices [ 14.145] (==) Automatically enabling devices [ 14.145] (==) Automatically adding GPU devices [ 14.217] (WW) The directory "/usr/share/fonts/OTF/" does not exist. [ 14.217] Entry deleted from font path. [ 14.217] (WW) The directory "/usr/share/fonts/Type1/" does not exist. [ 14.217] Entry deleted from font path. [ 14.217] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/". [ 14.217] Entry deleted from font path. [ 14.217] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/"). [ 14.241] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/". [ 14.241] Entry deleted from font path. [ 14.241] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/"). [ 14.241] (==) FontPath set to: /usr/share/fonts/misc/, /usr/share/fonts/TTF/ [ 14.241] (==) ModulePath set to "/usr/lib/xorg/modules" [ 14.241] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 14.241] (WW) Disabling Keyboard0 [ 14.241] (WW) Disabling Mouse0 [ 14.242] (II) Loader magic: 0x7fcc20 [ 14.242] (II) Module ABI versions: [ 14.242] X.Org ANSI C Emulation: 0.4 [ 14.242] X.Org Video Driver: 14.1 [ 14.242] X.Org XInput driver : 19.1 [ 14.242] X.Org Server Extension : 7.0 [ 14.242] (II) config/udev: Adding drm device (/dev/dri/card0) [ 14.243] (--) PCI:(0:2:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072 [ 14.258] Initializing built-in extension Generic Event Extension [ 14.258] Initializing built-in extension SHAPE [ 14.258] Initializing built-in extension MIT-SHM [ 14.258] Initializing built-in extension XInputExtension [ 14.258] Initializing built-in extension XTEST [ 14.258] Initializing built-in extension BIG-REQUESTS [ 14.258] Initializing built-in extension SYNC [ 14.258] Initializing built-in extension XKEYBOARD [ 14.258] Initializing built-in extension XC-MISC [ 14.258] Initializing built-in extension SECURITY [ 14.258] Initializing built-in extension XINERAMA [ 14.258] Initializing built-in extension XFIXES [ 14.258] Initializing built-in extension RENDER [ 14.258] Initializing built-in extension RANDR [ 14.258] Initializing built-in extension COMPOSITE [ 14.258] Initializing built-in extension DAMAGE [ 14.258] Initializing built-in extension MIT-SCREEN-SAVER [ 14.258] Initializing built-in extension DOUBLE-BUFFER [ 14.258] Initializing built-in extension RECORD [ 14.258] Initializing built-in extension DPMS [ 14.258] Initializing built-in extension X-Resource [ 14.258] Initializing built-in extension XVideo [ 14.258] Initializing built-in extension XVideo-MotionCompensation [ 14.258] Initializing built-in extension XFree86-VidModeExtension [ 14.258] Initializing built-in extension XFree86-DGA [ 14.258] Initializing built-in extension XFree86-DRI [ 14.258] Initializing built-in extension DRI2 [ 14.258] (II) LoadModule: "glx" [ 14.423] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 14.616] (II) Module glx: vendor="NVIDIA Corporation" [ 14.616] compiled for 4.0.2, module version = 1.0.0 [ 14.616] Module class: X.Org Server Extension [ 14.616] (II) NVIDIA GLX Module 319.17 Thu Apr 25 21:41:50 PDT 2013 [ 14.616] Loading extension GLX [ 14.616] (II) LoadModule: "nvidia" [ 14.616] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so [ 14.880] (II) Module nvidia: vendor="NVIDIA Corporation" [ 14.880] compiled for 4.0.2, module version = 1.0.0 [ 14.880] Module class: X.Org Video Driver [ 14.950] (II) NVIDIA dlloader X Driver 319.17 Thu Apr 25 21:23:57 PDT 2013 [ 14.950] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs [ 14.984] (++) using VT number 7 [ 15.030] (II) Loading sub module "fb" [ 15.030] (II) LoadModule: "fb" [ 15.031] (II) Loading /usr/lib/xorg/modules/libfb.so [ 15.049] (II) Module fb: vendor="X.Org Foundation" [ 15.049] compiled for 1.14.1, module version = 1.0.0 [ 15.049] ABI class: X.Org ANSI C Emulation, version 0.4 [ 15.049] (WW) Unresolved symbol: fbGetGCPrivateKey [ 15.049] (II) Loading sub module "wfb" [ 15.049] (II) LoadModule: "wfb" [ 15.050] (II) Loading /usr/lib/xorg/modules/libwfb.so [ 15.072] (II) Module wfb: vendor="X.Org Foundation" [ 15.072] compiled for 1.14.1, module version = 1.0.0 [ 15.072] ABI class: X.Org ANSI C Emulation, version 0.4 [ 15.072] (II) Loading sub module "shadow" [ 15.072] (II) LoadModule: "shadow" [ 15.073] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 15.074] (II) Module shadow: vendor="X.Org Foundation" [ 15.074] compiled for 1.14.1, module version = 1.1.0 [ 15.074] ABI class: X.Org ANSI C Emulation, version 0.4 [ 15.074] (II) Loading sub module "ramdac" [ 15.074] (II) LoadModule: "ramdac" [ 15.074] (II) Module "ramdac" already built-in [ 15.075] () NVIDIA(0): Depth 24, (--) framebuffer bpp 32 [ 15.075] (==) NVIDIA(0): RGB weight 888 [ 15.075] (==) NVIDIA(0): Default visual is TrueColor [ 15.075] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) [ 15.075] () NVIDIA(0): Enabling 2D acceleration [ 15.903] (II) NVIDIA(GPU-0): Display (Acer X191 (CRT-1)) does not support NVIDIA 3D Vision [ 15.903] (II) NVIDIA(GPU-0): stereo. [ 15.906] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:2:0:0 (GPU-0) [ 15.906] (--) NVIDIA(0): Memory: 1048576 kBytes [ 15.906] (--) NVIDIA(0): VideoBIOS: 60.84.61.00.00 [ 15.906] (II) NVIDIA(0): Detected PCI Express Link width: 16X [ 15.908] (--) NVIDIA(0): Valid display device(s) on GeForce 8600 GT at PCI:2:0:0 [ 15.908] (--) NVIDIA(0): CRT-0 [ 15.908] (--) NVIDIA(0): Acer X191 (CRT-1) (boot, connected) [ 15.908] (--) NVIDIA(0): DFP-0 [ 15.908] (--) NVIDIA(0): DFP-1 [ 15.908] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock [ 15.908] (--) NVIDIA(0): Acer X191 (CRT-1): 400.0 MHz maximum pixel clock [ 15.908] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock [ 15.908] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS [ 15.908] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock [ 15.908] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS [ 15.908] () NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display [ 15.908] () NVIDIA(0): device Acer X191 (CRT-1) (Using EDID frequencies has been [ 15.908] () NVIDIA(0): enabled on all display devices.) [ 15.910] (==) NVIDIA(0): [ 15.910] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" [ 15.910] (==) NVIDIA(0): will be used as the requested mode. [ 15.910] (==) NVIDIA(0): [ 15.910] (II) NVIDIA(0): Validated MetaModes: [ 15.910] (II) NVIDIA(0): "CRT-1:nvidia-auto-select{}" [ 15.911] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024 [ 15.942] (--) NVIDIA(0): DPI set to (87, 86); computed from "UseEdidDpi" X config [ 15.942] (--) NVIDIA(0): option [ 15.942] (--) Depth 24 pixmap format is 32 bpp [ 15.943] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access. [ 15.945] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon [ 15.945] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X [ 15.945] (II) NVIDIA(0): configuration option may not be set correctly. When the [ 15.945] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will [ 15.945] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For [ 15.945] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and [ 15.945] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X [ 15.945] (II) NVIDIA(0): Config Options in the README. [ 15.947] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select{}" [ 16.004] Loading extension NV-GLX [ 16.029] (==) NVIDIA(0): Disabling shared memory pixmaps [ 16.029] (==) NVIDIA(0): Backing store disabled [ 16.029] (==) NVIDIA(0): Silken mouse enabled [ 16.030] () NVIDIA(0): DPMS enabled [ 16.048] Loading extension NV-CONTROL [ 16.049] Loading extension XINERAMA [ 16.049] (II) Loading sub module "dri2" [ 16.049] (II) LoadModule: "dri2" [ 16.049] (II) Module "dri2" already built-in [ 16.049] (II) NVIDIA(0): [DRI2] Setup complete [ 16.049] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia [ 16.049] (--) RandR disabled [ 16.056] (II) Initializing extension GLX [ 16.432] (II) config/udev: Adding input device Power Button (/dev/input/event4) [ 16.432] () Power Button: Applying InputClass "evdev keyboard catchall" [ 16.432] (II) LoadModule: "evdev" [ 16.432] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 16.438] (II) Module evdev: vendor="X.Org Foundation" [ 16.438] compiled for 1.14.0, module version = 2.8.0 [ 16.438] Module class: X.Org XInput Driver [ 16.438] ABI class: X.Org XInput driver, version 19.1 [ 16.438] (II) Using input driver 'evdev' for 'Power Button' [ 16.438] () Power Button: always reports core events [ 16.438] () evdev: Power Button: Device: "/dev/input/event4" [ 16.438] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 16.438] (--) evdev: Power Button: Found keys [ 16.438] (II) evdev: Power Button: Configuring as keyboard [ 16.438] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4" [ 16.438] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 16.438] () Option "xkb_rules" "evdev" [ 16.438] () Option "xkb_model" "evdev" [ 16.438] () Option "xkb_layout" "us" [ 16.472] (II) config/udev: Adding input device Power Button (/dev/input/event3) [ 16.472] () Power Button: Applying InputClass "evdev keyboard catchall" [ 16.472] (II) Using input driver 'evdev' for 'Power Button' [ 16.472] () Power Button: always reports core events [ 16.472] () evdev: Power Button: Device: "/dev/input/event3" [ 16.472] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 16.472] (--) evdev: Power Button: Found keys [ 16.472] (II) evdev: Power Button: Configuring as keyboard [ 16.472] () Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3" [ 16.472] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7) [ 16.472] () Option "xkb_rules" "evdev" [ 16.472] () Option "xkb_model" "evdev" [ 16.472] () Option "xkb_layout" "us" [ 16.473] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event0) [ 16.473] () A4Tech USB Mouse: Applying InputClass "evdev pointer catchall" [ 16.473] (II) Using input driver 'evdev' for 'A4Tech USB Mouse' [ 16.473] () A4Tech USB Mouse: always reports core events [ 16.473] () evdev: A4Tech USB Mouse: Device: "/dev/input/event0" [ 16.473] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xa [ 16.473] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons [ 16.473] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s) [ 16.473] (--) evdev: A4Tech USB Mouse: Found relative axes [ 16.473] (--) evdev: A4Tech USB Mouse: Found x and y relative axes [ 16.473] (II) evdev: A4Tech USB Mouse: Configuring as mouse [ 16.473] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support [ 16.473] () evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5 [ 16.473] () evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 16.473] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0/event0" [ 16.473] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 8) [ 16.488] (II) evdev: A4Tech USB Mouse: initialized for relative axes. [ 16.488] () A4Tech USB Mouse: (accel) keeping acceleration scheme 1 [ 16.488] () A4Tech USB Mouse: (accel) acceleration profile 0 [ 16.488] () A4Tech USB Mouse: (accel) acceleration factor: 2.000 [ 16.488] () A4Tech USB Mouse: (accel) acceleration threshold: 4 [ 16.488] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse0) [ 16.488] (II) No input driver specified, ignoring this device. [ 16.489] (II) This device may have been added with another device file. [ 16.489] (II) config/udev: Adding input device USB Keyboard (/dev/input/event1) [ 16.489] () USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 16.489] (II) Using input driver 'evdev' for ' USB Keyboard' [ 16.489] () USB Keyboard: always reports core events [ 16.489] () evdev: USB Keyboard: Device: "/dev/input/event1" [ 16.489] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1503 [ 16.489] (--) evdev: USB Keyboard: Found keys [ 16.489] (II) evdev: USB Keyboard: Configuring as keyboard [ 16.489] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1" [ 16.489] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9) [ 16.489] () Option "xkb_rules" "evdev" [ 16.489] () Option "xkb_model" "evdev" [ 16.489] () Option "xkb_layout" "us" [ 16.489] (II) config/udev: Adding input device USB Keyboard (/dev/input/event2) [ 16.489] () USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 16.489] (II) Using input driver 'evdev' for ' USB Keyboard' [ 16.489] () USB Keyboard: always reports core events [ 16.489] () evdev: USB Keyboard: Device: "/dev/input/event2" [ 16.490] (--) evdev: USB Keyboard: Vendor 0x4d9 Product 0x1503 [ 16.490] (--) evdev: USB Keyboard: Found keys [ 16.490] (II) evdev: USB Keyboard: Configuring as keyboard [ 16.490] () Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input2/event2" [ 16.490] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 10) [ 16.490] () Option "xkb_rules" "evdev" [ 16.490] () Option "xkb_model" "evdev" [ 16.490] (*) Option "xkb_layout" "us" [ 16.490] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event10) [ 16.490] (II) No input driver specified, ignoring this device. [ 16.490] (II) This device may have been added with another device file. [ 16.490] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6) [ 16.490] (II) No input driver specified, ignoring this device. [ 16.490] (II) This device may have been added with another device file. [ 16.490] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event7) [ 16.491] (II) No input driver specified, ignoring this device. [ 16.491] (II) This device may have been added with another device file. [ 16.491] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8) [ 16.491] (II) No input driver specified, ignoring this device. [ 16.491] (II) This device may have been added with another device file. [ 16.491] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9) [ 16.491] (II) No input driver specified, ignoring this device. [ 16.491] (II) This device may have been added with another device file. [ 16.491] (II) config/udev: Adding drm device (/dev/dri/card0) [ 16.491] (II) config/udev: Adding input device PC Speaker (/dev/input/event5) [ 16.491] (II) No input driver specified, ignoring this device. [ 16.491] (II) This device may have been added with another device file. [ 1238.163] (II) evdev: USB Keyboard: Close [ 1238.163] (II) UnloadModule: "evdev" [ 1238.163] (II) evdev: USB Keyboard: Close [ 1238.163] (II) UnloadModule: "evdev" [ 1238.163] (II) evdev: A4Tech USB Mouse: Close [ 1238.166] (II) UnloadModule: "evdev" [ 1238.166] (II) evdev: Power Button: Close [ 1238.166] (II) UnloadModule: "evdev" [ 1238.166] (II) evdev: Power Button: Close [ 1238.166] (II) UnloadModule: "evdev" [ 1238.190] Server terminated successfully (0). Closing log file. Как жить? Валить на другой дистр вообще не вариант ибо считаю арч идеальным.

# 9 лет, 3 месяца назад

Сообщения: 51

Участник с: 12 января 2013

Создавал уже тему.
После обновления снова всё полетело. Переставил систему, но ничто уже не помогало. Вычитал что дрова 319.17 должны поддерживать новый X. Поставил из aur nvidia-beta. Версия такая же что и в репах, но почему то заработала. Пару дней прожил без проблем. Но позже на ровном месте снова начала твориться Н.Е.Х. Проблема появлялась даже на свободных драйверах.

No protocol specified
Geany: cannot open display

[    14.061]
X.Org X Server 1.14.1
Release Date: 2013-04-17
[    14.061] X Protocol Version 11, Revision 0
[    14.061] Build Operating System: Linux 3.8.7-1-ARCH x86_64
[    14.061] Current Operating System: Linux localhost 3.9.2-1-ARCH #1 SMP PREEMPT Sat May 11 20:31:08 CEST 2013 x86_64
[    14.061] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8a7d1718-5f3d-4c8d-a457-8c6a8ad73118 ro vga=0x031b plymouth --boot-up
[    14.061] Build Date: 17 April 2013  02:37:06PM
[    14.061]
[    14.061] Current version of pixman: 0.30.0
[    14.061] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    14.061] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    14.061] (==) Log file: "/var/log/Xorg.0.log", Time: Wed May 15 04:02:40 2013
[    14.092] (==) Using config file: "/etc/X11/xorg.conf"
[    14.092] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    14.145] (==) ServerLayout "Layout0"
[    14.145] (**) |-->Screen "Screen0" (0)
[    14.145] (**) |   |-->Monitor "Monitor0"
[    14.145] (**) |   |-->Device "Device0"
[    14.145] (**) |-->Input Device "Keyboard0"
[    14.145] (**) |-->Input Device "Mouse0"
[    14.145] (==) Automatically adding devices
[    14.145] (==) Automatically enabling devices
[    14.145] (==) Automatically adding GPU devices
[    14.217] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    14.217] 	Entry deleted from font path.
[    14.217] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    14.217] 	Entry deleted from font path.
[    14.217] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    14.217] 	Entry deleted from font path.
[    14.217] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    14.241] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    14.241] 	Entry deleted from font path.
[    14.241] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    14.241] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/
[    14.241] (==) ModulePath set to "/usr/lib/xorg/modules"
[    14.241] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    14.241] (WW) Disabling Keyboard0
[    14.241] (WW) Disabling Mouse0
[    14.242] (II) Loader magic: 0x7fcc20
[    14.242] (II) Module ABI versions:
[    14.242] 	X.Org ANSI C Emulation: 0.4
[    14.242] 	X.Org Video Driver: 14.1
[    14.242] 	X.Org XInput driver : 19.1
[    14.242] 	X.Org Server Extension : 7.0
[    14.242] (II) config/udev: Adding drm device (/dev/dri/card0)
[    14.243] (--) PCI:*(0:2:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfb000000/16777216, 0xe0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[    14.258] Initializing built-in extension Generic Event Extension
[    14.258] Initializing built-in extension SHAPE
[    14.258] Initializing built-in extension MIT-SHM
[    14.258] Initializing built-in extension XInputExtension
[    14.258] Initializing built-in extension XTEST
[    14.258] Initializing built-in extension BIG-REQUESTS
[    14.258] Initializing built-in extension SYNC
[    14.258] Initializing built-in extension XKEYBOARD
[    14.258] Initializing built-in extension XC-MISC
[    14.258] Initializing built-in extension SECURITY
[    14.258] Initializing built-in extension XINERAMA
[    14.258] Initializing built-in extension XFIXES
[    14.258] Initializing built-in extension RENDER
[    14.258] Initializing built-in extension RANDR
[    14.258] Initializing built-in extension COMPOSITE
[    14.258] Initializing built-in extension DAMAGE
[    14.258] Initializing built-in extension MIT-SCREEN-SAVER
[    14.258] Initializing built-in extension DOUBLE-BUFFER
[    14.258] Initializing built-in extension RECORD
[    14.258] Initializing built-in extension DPMS
[    14.258] Initializing built-in extension X-Resource
[    14.258] Initializing built-in extension XVideo
[    14.258] Initializing built-in extension XVideo-MotionCompensation
[    14.258] Initializing built-in extension XFree86-VidModeExtension
[    14.258] Initializing built-in extension XFree86-DGA
[    14.258] Initializing built-in extension XFree86-DRI
[    14.258] Initializing built-in extension DRI2
[    14.258] (II) LoadModule: "glx"
[    14.423] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    14.616] (II) Module glx: vendor="NVIDIA Corporation"
[    14.616] 	compiled for 4.0.2, module version = 1.0.0
[    14.616] 	Module class: X.Org Server Extension
[    14.616] (II) NVIDIA GLX Module  319.17  Thu Apr 25 21:41:50 PDT 2013
[    14.616] Loading extension GLX
[    14.616] (II) LoadModule: "nvidia"
[    14.616] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    14.880] (II) Module nvidia: vendor="NVIDIA Corporation"
[    14.880] 	compiled for 4.0.2, module version = 1.0.0
[    14.880] 	Module class: X.Org Video Driver
[    14.950] (II) NVIDIA dlloader X Driver  319.17  Thu Apr 25 21:23:57 PDT 2013
[    14.950] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    14.984] (++) using VT number 7
[    15.030] (II) Loading sub module "fb"
[    15.030] (II) LoadModule: "fb"
[    15.031] (II) Loading /usr/lib/xorg/modules/libfb.so
[    15.049] (II) Module fb: vendor="X.Org Foundation"
[    15.049] 	compiled for 1.14.1, module version = 1.0.0
[    15.049] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.049] (WW) Unresolved symbol: fbGetGCPrivateKey
[    15.049] (II) Loading sub module "wfb"
[    15.049] (II) LoadModule: "wfb"
[    15.050] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    15.072] (II) Module wfb: vendor="X.Org Foundation"
[    15.072] 	compiled for 1.14.1, module version = 1.0.0
[    15.072] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.072] (II) Loading sub module "shadow"
[    15.072] (II) LoadModule: "shadow"
[    15.073] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    15.074] (II) Module shadow: vendor="X.Org Foundation"
[    15.074] 	compiled for 1.14.1, module version = 1.1.0
[    15.074] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    15.074] (II) Loading sub module "ramdac"
[    15.074] (II) LoadModule: "ramdac"
[    15.074] (II) Module "ramdac" already built-in
[    15.075] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    15.075] (==) NVIDIA(0): RGB weight 888
[    15.075] (==) NVIDIA(0): Default visual is TrueColor
[    15.075] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    15.075] (**) NVIDIA(0): Enabling 2D acceleration
[    15.903] (II) NVIDIA(GPU-0): Display (Acer X191 (CRT-1)) does not support NVIDIA 3D Vision
[    15.903] (II) NVIDIA(GPU-0):     stereo.
[    15.906] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:2:0:0 (GPU-0)
[    15.906] (--) NVIDIA(0): Memory: 1048576 kBytes
[    15.906] (--) NVIDIA(0): VideoBIOS: 60.84.61.00.00
[    15.906] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    15.908] (--) NVIDIA(0): Valid display device(s) on GeForce 8600 GT at PCI:2:0:0
[    15.908] (--) NVIDIA(0):     CRT-0
[    15.908] (--) NVIDIA(0):     Acer X191 (CRT-1) (boot, connected)
[    15.908] (--) NVIDIA(0):     DFP-0
[    15.908] (--) NVIDIA(0):     DFP-1
[    15.908] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    15.908] (--) NVIDIA(0): Acer X191 (CRT-1): 400.0 MHz maximum pixel clock
[    15.908] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[    15.908] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[    15.908] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[    15.908] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[    15.908] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    15.908] (**) NVIDIA(0):     device Acer X191 (CRT-1) (Using EDID frequencies has been
[    15.908] (**) NVIDIA(0):     enabled on all display devices.)
[    15.910] (==) NVIDIA(0):
[    15.910] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    15.910] (==) NVIDIA(0):     will be used as the requested mode.
[    15.910] (==) NVIDIA(0):
[    15.910] (II) NVIDIA(0): Validated MetaModes:
[    15.910] (II) NVIDIA(0):     "CRT-1:nvidia-auto-select{}"
[    15.911] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[    15.942] (--) NVIDIA(0): DPI set to (87, 86); computed from "UseEdidDpi" X config
[    15.942] (--) NVIDIA(0):     option
[    15.942] (--) Depth 24 pixmap format is 32 bpp
[    15.943] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    15.945] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    15.945] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    15.945] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    15.945] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    15.945] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    15.945] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    15.945] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    15.945] (II) NVIDIA(0):     Config Options in the README.
[    15.947] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select{}"
[    16.004] Loading extension NV-GLX
[    16.029] (==) NVIDIA(0): Disabling shared memory pixmaps
[    16.029] (==) NVIDIA(0): Backing store disabled
[    16.029] (==) NVIDIA(0): Silken mouse enabled
[    16.030] (**) NVIDIA(0): DPMS enabled
[    16.048] Loading extension NV-CONTROL
[    16.049] Loading extension XINERAMA
[    16.049] (II) Loading sub module "dri2"
[    16.049] (II) LoadModule: "dri2"
[    16.049] (II) Module "dri2" already built-in
[    16.049] (II) NVIDIA(0): [DRI2] Setup complete
[    16.049] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    16.049] (--) RandR disabled
[    16.056] (II) Initializing extension GLX
[    16.432] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    16.432] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.432] (II) LoadModule: "evdev"
[    16.432] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.438] (II) Module evdev: vendor="X.Org Foundation"
[    16.438] 	compiled for 1.14.0, module version = 2.8.0
[    16.438] 	Module class: X.Org XInput Driver
[    16.438] 	ABI class: X.Org XInput driver, version 19.1
[    16.438] (II) Using input driver 'evdev' for 'Power Button'
[    16.438] (**) Power Button: always reports core events
[    16.438] (**) evdev: Power Button: Device: "/dev/input/event4"
[    16.438] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.438] (--) evdev: Power Button: Found keys
[    16.438] (II) evdev: Power Button: Configuring as keyboard
[    16.438] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    16.438] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    16.438] (**) Option "xkb_rules" "evdev"
[    16.438] (**) Option "xkb_model" "evdev"
[    16.438] (**) Option "xkb_layout" "us"
[    16.472] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    16.472] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    16.472] (II) Using input driver 'evdev' for 'Power Button'
[    16.472] (**) Power Button: always reports core events
[    16.472] (**) evdev: Power Button: Device: "/dev/input/event3"
[    16.472] (--) evdev: Power Button: Vendor 0 Product 0x1
[    16.472] (--) evdev: Power Button: Found keys
[    16.472] (II) evdev: Power Button: Configuring as keyboard
[    16.472] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[    16.472] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    16.472] (**) Option "xkb_rules" "evdev"
[    16.472] (**) Option "xkb_model" "evdev"
[    16.472] (**) Option "xkb_layout" "us"
[    16.473] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/event0)
[    16.473] (**) A4Tech USB Mouse: Applying InputClass "evdev pointer catchall"
[    16.473] (II) Using input driver 'evdev' for 'A4Tech USB Mouse'
[    16.473] (**) A4Tech USB Mouse: always reports core events
[    16.473] (**) evdev: A4Tech USB Mouse: Device: "/dev/input/event0"
[    16.473] (--) evdev: A4Tech USB Mouse: Vendor 0x9da Product 0xa
[    16.473] (--) evdev: A4Tech USB Mouse: Found 12 mouse buttons
[    16.473] (--) evdev: A4Tech USB Mouse: Found scroll wheel(s)
[    16.473] (--) evdev: A4Tech USB Mouse: Found relative axes
[    16.473] (--) evdev: A4Tech USB Mouse: Found x and y relative axes
[    16.473] (II) evdev: A4Tech USB Mouse: Configuring as mouse
[    16.473] (II) evdev: A4Tech USB Mouse: Adding scrollwheel support
[    16.473] (**) evdev: A4Tech USB Mouse: YAxisMapping: buttons 4 and 5
[    16.473] (**) evdev: A4Tech USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    16.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input0/event0"
[    16.473] (II) XINPUT: Adding extended input device "A4Tech USB Mouse" (type: MOUSE, id 8)
[    16.488] (II) evdev: A4Tech USB Mouse: initialized for relative axes.
[    16.488] (**) A4Tech USB Mouse: (accel) keeping acceleration scheme 1
[    16.488] (**) A4Tech USB Mouse: (accel) acceleration profile 0
[    16.488] (**) A4Tech USB Mouse: (accel) acceleration factor: 2.000
[    16.488] (**) A4Tech USB Mouse: (accel) acceleration threshold: 4
[    16.488] (II) config/udev: Adding input device A4Tech USB Mouse (/dev/input/mouse0)
[    16.488] (II) No input driver specified, ignoring this device.
[    16.489] (II) This device may have been added with another device file.
[    16.489] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event1)
[    16.489] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    16.489] (II) Using input driver 'evdev' for '  USB Keyboard'
[    16.489] (**)   USB Keyboard: always reports core events
[    16.489] (**) evdev:   USB Keyboard: Device: "/dev/input/event1"
[    16.489] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1503
[    16.489] (--) evdev:   USB Keyboard: Found keys
[    16.489] (II) evdev:   USB Keyboard: Configuring as keyboard
[    16.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input1/event1"
[    16.489] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 9)
[    16.489] (**) Option "xkb_rules" "evdev"
[    16.489] (**) Option "xkb_model" "evdev"
[    16.489] (**) Option "xkb_layout" "us"
[    16.489] (II) config/udev: Adding input device   USB Keyboard (/dev/input/event2)
[    16.489] (**)   USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    16.489] (II) Using input driver 'evdev' for '  USB Keyboard'
[    16.489] (**)   USB Keyboard: always reports core events
[    16.489] (**) evdev:   USB Keyboard: Device: "/dev/input/event2"
[    16.490] (--) evdev:   USB Keyboard: Vendor 0x4d9 Product 0x1503
[    16.490] (--) evdev:   USB Keyboard: Found keys
[    16.490] (II) evdev:   USB Keyboard: Configuring as keyboard
[    16.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input2/event2"
[    16.490] (II) XINPUT: Adding extended input device "  USB Keyboard" (type: KEYBOARD, id 10)
[    16.490] (**) Option "xkb_rules" "evdev"
[    16.490] (**) Option "xkb_model" "evdev"
[    16.490] (**) Option "xkb_layout" "us"
[    16.490] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event10)
[    16.490] (II) No input driver specified, ignoring this device.
[    16.490] (II) This device may have been added with another device file.
[    16.490] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event6)
[    16.490] (II) No input driver specified, ignoring this device.
[    16.490] (II) This device may have been added with another device file.
[    16.490] (II) config/udev: Adding input device HDA NVidia Front Mic (/dev/input/event7)
[    16.491] (II) No input driver specified, ignoring this device.
[    16.491] (II) This device may have been added with another device file.
[    16.491] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event8)
[    16.491] (II) No input driver specified, ignoring this device.
[    16.491] (II) This device may have been added with another device file.
[    16.491] (II) config/udev: Adding input device HDA NVidia Front Headphone (/dev/input/event9)
[    16.491] (II) No input driver specified, ignoring this device.
[    16.491] (II) This device may have been added with another device file.
[    16.491] (II) config/udev: Adding drm device (/dev/dri/card0)
[    16.491] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    16.491] (II) No input driver specified, ignoring this device.
[    16.491] (II) This device may have been added with another device file.
[  1238.163] (II) evdev:   USB Keyboard: Close
[  1238.163] (II) UnloadModule: "evdev"
[  1238.163] (II) evdev:   USB Keyboard: Close
[  1238.163] (II) UnloadModule: "evdev"
[  1238.163] (II) evdev: A4Tech USB Mouse: Close
[  1238.166] (II) UnloadModule: "evdev"
[  1238.166] (II) evdev: Power Button: Close
[  1238.166] (II) UnloadModule: "evdev"
[  1238.166] (II) evdev: Power Button: Close
[  1238.166] (II) UnloadModule: "evdev"
[  1238.190] Server terminated successfully (0). Closing log file.

Как жить? Валить на другой дистр вообще не вариант ибо считаю арч идеальным.

Aivar	# 9 лет, 3 месяца назад
Темы: 4 Сообщения: 6897 Участник с: 17 февраля 2011	Не думаю, что есть смысл куда-то сваливать. У меня такая же карточка со стандартными дровами работает без нареканий, Xorg - из оф. репозитория. У вас собака порылась где-то в другом месте. А если запускать иксы без slim'а?

Aivar	# 9 лет, 3 месяца назад
Темы: 4 Сообщения: 6897 Участник с: 17 февраля 2011	И какой оконный менеджер, кстати?

TANK	# 9 лет, 3 месяца назад
Темы: 14 Сообщения: 51 Участник с: 12 января 2013	Создал /usr/lib/systemd/system/X.service [Unit] Description=X After=systemd-user-sessions.service [Service] ExecStart=/bin/su tank -l -c "/bin/bash --login -c startx >/dev/null 2>/dev/null" [Install] Alias=display-manager.service systemctl enable X systemctl start X Хватило на не скалько стартов. Буду переставлять систему. Отпишусь. По крайней мере во время работы cannot open display не было. Система: razor-qt+openbox

TANK

# 9 лет, 3 месяца назад

Темы: 14

Сообщения: 51

Участник с: 12 января 2013

Создал /usr/lib/systemd/system/X.service

[Unit]
Description=X
After=systemd-user-sessions.service
[Service]
ExecStart=/bin/su tank -l -c "/bin/bash --login -c startx >/dev/null 2>/dev/null"
[Install]
Alias=display-manager.service

systemctl enable X
systemctl start X

Хватило на не скалько стартов. Буду переставлять систему. Отпишусь. По крайней мере во время работы cannot open display не было.
Система: razor-qt+openbox

dengor	# 9 лет, 3 месяца назад
Темы: 15 Сообщения: 301 Участник с: 27 июля 2010	Что выдаёт hostnamectl? У меня в /etc/hostname не был прописан хост, точнее не было самого файла. Прописал, перезагрузил и пока ещё ошибок не было.

marlock	# 9 лет, 3 месяца назад
Темы: 35 Сообщения: 736 Участник с: 02 июля 2010	dengor Что выдаёт hostnamectl? У меня в /etc/hostname не был прописан хост, точнее не было самого файла. Прописал, перезагрузил и пока ещё ошибок не было. hostname правильнее задавать через hostnamectl

dengor	# 9 лет, 3 месяца назад
Темы: 15 Сообщения: 301 Участник с: 27 июля 2010	Ну я при установке так и делал. А файл не создался. А может я где-то протупил. Решил наверняка.

marlock	# 9 лет, 3 месяца назад
Темы: 35 Сообщения: 736 Участник с: 02 июля 2010	Файл и не создаётся как бы, насколько мне известно.

lampslave	# 9 лет, 3 месяца назад
Темы: 32 Сообщения: 4801 Участник с: 05 июля 2011	marlock dengor Что выдаёт hostnamectl? У меня в /etc/hostname не был прописан хост, точнее не было самого файла. Прописал, перезагрузил и пока ещё ошибок не было. hostname правильнее задавать через hostnamectl Это основывается на каких-то фактах или на штампе "программа умнее меня"?

lampslave

# 9 лет, 3 месяца назад

Темы: 32

Сообщения: 4801

Участник с: 05 июля 2011

marlock
dengor
Что выдаёт hostnamectl? У меня в /etc/hostname не был прописан хост, точнее не было самого файла.
Прописал, перезагрузил и пока ещё ошибок не было.
hostname правильнее задавать через hostnamectl

Это основывается на каких-то фактах или на штампе "программа умнее меня"?

marlock	# 9 лет, 3 месяца назад
Темы: 35 Сообщения: 736 Участник с: 02 июля 2010	lampslave marlock dengor Что выдаёт hostnamectl? У меня в /etc/hostname не был прописан хост, точнее не было самого файла. Прописал, перезагрузил и пока ещё ошибок не было. hostname правильнее задавать через hostnamectl Это основывается на каких-то фактах или на штампе "программа умнее меня"? Это основывается на актуальной версии Wiki-страницы по установке системы. Не имею оснований не верить документу. + Эта темка

marlock

# 9 лет, 3 месяца назад

Темы: 35

Сообщения: 736

Участник с: 02 июля 2010

lampslave
marlock
dengor
Что выдаёт hostnamectl? У меня в /etc/hostname не был прописан хост, точнее не было самого файла.
Прописал, перезагрузил и пока ещё ошибок не было.
hostname правильнее задавать через hostnamectl
Это основывается на каких-то фактах или на штампе "программа умнее меня"?

Это основывается на актуальной версии Wiki-страницы по установке системы. Не имею оснований не верить документу.
+ Эта темка